Guest Mr. No_Face Posted March 15, 2022 Share Posted March 15, 2022 2 minutes ago, C-Diddy said: Have you got any hop on? I'm trying it now but the wheel is so damn stiff. Refuses to budge Link to comment Share on other sites More sharing options...
C-Diddy Posted March 15, 2022 Share Posted March 15, 2022 9 minutes ago, Mr. No_Face said: I'm trying it now but the wheel is so damn stiff. Refuses to budge The hop adjustment is a pain in the arse to adjust on these. I always use a small allen key just to get some extra purchase on the wheel Link to comment Share on other sites More sharing options...
Guest Mr. No_Face Posted March 15, 2022 Share Posted March 15, 2022 44 minutes ago, C-Diddy said: The hop adjustment is a pain in the arse to adjust on these. I always use a small allen key just to get some extra purchase on the wheel Result! That's done the trick but adjusting the hop up was a mofo. One of the unique selling points of the MWS series was "the ease of adjusting the hop up on a fly" Link to comment Share on other sites More sharing options...
C-Diddy Posted March 15, 2022 Share Posted March 15, 2022 6 minutes ago, Mr. No_Face said: Result! That's done the trick but adjusting the hop up was a mofo. One of the unique selling points of the MWS series was "the ease of adjusting the hop up on a fly" Ah, cool. I know some people can adjust it through the ejection port, but I have to break the gun to do it. The GHK system seems far more accessible. Link to comment Share on other sites More sharing options...
Argyld Posted March 15, 2022 Share Posted March 15, 2022 Mine is stiff, but no so stiff that you can't adjust click per click. If I remember correctly, usually when the adjustment was too stiff, then usually something was done wrong during re-assembly. I access the through the magwell, my fingers are just long enough SSPKali 1 Link to comment Share on other sites More sharing options...
Snippy Posted March 18, 2022 Share Posted March 18, 2022 Welp, replaced the stock hopup arm with the metal Laylax and the gun is shooting like butter!! Downside though, I dropped a mag onto concrete when I was placing it into a dump pouch and the feed lip bid me farewell. Does anyone have any experience with the Ace 1 Arms feed lip replacements? Everywhere is sold out of stock MWS ones, so Im gonna take it that the stock ones are superior... Link to comment Share on other sites More sharing options...
C-Diddy Posted March 18, 2022 Share Posted March 18, 2022 1 hour ago, Snippy said: Welp, replaced the stock hopup arm with the metal Laylax and the gun is shooting like butter!! Downside though, I dropped a mag onto concrete when I was placing it into a dump pouch and the feed lip bid me farewell. Does anyone have any experience with the Ace 1 Arms feed lip replacements? Everywhere is sold out of stock MWS ones, so Im gonna take it that the stock ones are superior... Not sure about the Ace 1 Arms replacements I'm afraid. I would recommend getting a stock alert set for the TM lips on Impulse101 although they have suspended shipping to the UK and Europe at the moment. Link to comment Share on other sites More sharing options...
Snippy Posted March 18, 2022 Share Posted March 18, 2022 14 minutes ago, C-Diddy said: Not sure about the Ace 1 Arms replacements I'm afraid. I would recommend getting a stock alert set for the TM lips on Impulse101 although they have suspended shipping to the UK and Europe at the moment. Ahh yea, I will check with Impulse101 and see if they ship to Canada! C-Diddy 1 Link to comment Share on other sites More sharing options...
MILITATED Posted March 19, 2022 Share Posted March 19, 2022 (edited) What is the best option for a MWS bolt carrier? I've heard AG are nothing but problems. I can't find much on Guns Modify's, other than one person saying it works great & another saying it only works on semi auto in all his MWS. G&P's bolts look promising but noticed there are various listings for different buffer tubes (standard MWS tube only, G&P MWS tubes) - what's the difference? A few have said standard Marui bolts will do fine but since I'm building my MWS without a donor MWS, getting a standard bolt will be costly. I've got a G&P trigger box coming, so a G&P bolt would be preferable, but not sure which listing to go for. If anyone has a bolt, or a standard Marui hop unit they're not using, let me know 😏 I've heard that aftermarket hop units are slightly thinner(?) & so don't work too good in the Dytac receiver, so it'd have to be standard Marui, unless someone has had a different experience. Thanks in advance! Edited March 19, 2022 by MILITATED Link to comment Share on other sites More sharing options...
Guest Mr. No_Face Posted March 19, 2022 Share Posted March 19, 2022 (edited) On 18/03/2022 at 17:52, Snippy said: Welp, replaced the stock hopup arm with the metal Laylax and the gun is shooting like butter!! Downside though, I dropped a mag onto concrete when I was placing it into a dump pouch and the feed lip bid me farewell. Does anyone have any experience with the Ace 1 Arms feed lip replacements? Everywhere is sold out of stock MWS ones, so Im gonna take it that the stock ones are superior... You were having a similar problem to me I think. Only my issue started to occur as soon as I opened up the build. Now I'm consistently having problems with bbs rolling out of the barrel after every second shot even with the hop adjusted substantially. Is it time for me to start regretting this purchase? Edited March 19, 2022 by Mr. No_Face Link to comment Share on other sites More sharing options...
Snippy Posted March 19, 2022 Share Posted March 19, 2022 20 minutes ago, Mr. No_Face said: You were having a similar problem to me I think. Only my issue started to occur as soon as I opened up the build. Now I'm consistently having problems with bbs rolling out of the barrel after every second shot even with the hop adjusted substantially. Is it time for me to start regretting this purchase? Maybe you didn't put it back together properly? When the hop-up goes into the receiver there is some left and right play, like 1mm on each side. You'd probably want to try to get it to stay centered as best you can as you tighten it. Reading the entire thread, there is nothing but praise for the MWS with stock internals, or with mainly stock and a SixG brass nub. Im sure if youre regretting your purchase youll easily sell it in no time Link to comment Share on other sites More sharing options...
Guest Mr. No_Face Posted March 19, 2022 Share Posted March 19, 2022 (edited) 32 minutes ago, Snippy said: Maybe you didn't put it back together properly? When the hop-up goes into the receiver there is some left and right play, like 1mm on each side. You'd probably want to try to get it to stay centered as best you can as you tighten it. Reading the entire thread, there is nothing but praise for the MWS with stock internals, or with mainly stock and a SixG brass nub. Im sure if youre regretting your purchase youll easily sell it in no time I haven't moved anything it's literally stock. The most I did was replace the charging handle, that's when the issues started happening after opening and re-constructing it. Then I was informed that the issue could be due to having zero hop at stock. Which I managed to fix this issue temporarily by simply applying a few clicks. Problem has started all over again to which the fix was once again a matter of applying a few more clicks to the hop. I can foresee this being a re-occurring issue that's gonna end up becoming a major inconvenience for me. The good thing is like you mentioned, I can easily sell this.👍 Edited March 19, 2022 by Mr. No_Face Link to comment Share on other sites More sharing options...
Snippy Posted March 19, 2022 Share Posted March 19, 2022 Is the hop setting to zero hop after a few shots? And like I said, you had re-constructed it, perhaps you didnt put it back together properly? You could always count how many clicks youre at after a few shots and see if its being shifted from your zero (or just mark where its zero'ed for you). Link to comment Share on other sites More sharing options...
C-Diddy Posted March 20, 2022 Share Posted March 20, 2022 5 hours ago, Mr. No_Face said: I haven't moved anything it's literally stock. The most I did was replace the charging handle, that's when the issues started happening after opening and re-constructing it. Then I was informed that the issue could be due to having zero hop at stock. Which I managed to fix this issue temporarily by simply applying a few clicks. Problem has started all over again to which the fix was once again a matter of applying a few more clicks to the hop. I can foresee this being a re-occurring issue that's gonna end up becoming a major inconvenience for me. The good thing is like you mentioned, I can easily sell this.👍 Is it worth giving the retailer a shout? Link to comment Share on other sites More sharing options...
Guest Mr. No_Face Posted March 20, 2022 Share Posted March 20, 2022 16 hours ago, C-Diddy said: Is it worth giving the retailer a shout? I hope not, I had the chance to test it thoroughly today and it performed great. Everything seems to be in working order for now.👍 Link to comment Share on other sites More sharing options...
C-Diddy Posted March 20, 2022 Share Posted March 20, 2022 3 hours ago, Mr. No_Face said: I hope not, I had the chance to test it thoroughly today and it performed great. Everything seems to be in working order for now.👍 That's good news buddy. What ammo you running in it? Link to comment Share on other sites More sharing options...
Guest Mr. No_Face Posted March 20, 2022 Share Posted March 20, 2022 7 minutes ago, C-Diddy said: That's good news buddy. What ammo you running in it? Running .25s still looking to get that sixG Nub so I can start lifting heavier bbs consistently. But I was more than impressed running .25s and watching those bbs glide gloriously to their intended targets. Link to comment Share on other sites More sharing options...
C-Diddy Posted March 21, 2022 Share Posted March 21, 2022 2 hours ago, Mr. No_Face said: Running .25s still looking to get that sixG Nub so I can start lifting heavier bbs consistently. But I was more than impressed running .25s and watching those bbs glide gloriously to their intended targets. Stock setup should lift up to .28s. I primarily run .3s at the moment, but have some ASG .32 Open Blasters to try. I know many people on here run heavier ammo in their guns so have a play around once you get your SixG nub. If you haven't already (I suspect you have though) check out Ollie Talks Airsoft on YouTube. Loads of decent MWS content. Link to comment Share on other sites More sharing options...
Snippy Posted March 21, 2022 Share Posted March 21, 2022 You could always also try the Laylax metal hop-up arm, acts almost the same as the SixG nub. I was running that last week on .28s and it was shooting pretty straight at 75ft. Link to comment Share on other sites More sharing options...
Groot Posted March 21, 2022 Share Posted March 21, 2022 ArranTurner 1 Link to comment Share on other sites More sharing options...
demandt Posted March 22, 2022 Share Posted March 22, 2022 On 14/03/2022 at 12:03, Khyber said: Just fitted an RA-Tech NPAS to my TM MWS. Great FPS improvement. Super happy with the results. Thanks for the results! I've been eyeing the RA-TECH NPAS for a while. Think I'll give it a go Link to comment Share on other sites More sharing options...
Khyber Posted March 22, 2022 Share Posted March 22, 2022 5 minutes ago, demandt said: Thanks for the results! I've been eyeing the RA-TECH NPAS for a while. Think I'll give it a go My pleasure, im sure happy with it. Had to get mine from Emperion as i couldn't find any UK stock, came in around 10 days. but super easy to fit, took about 10 minutes, and just the results i was after. Link to comment Share on other sites More sharing options...
camden Posted March 22, 2022 Share Posted March 22, 2022 My OEM upper is not working but my mate's is (on my lower receiver) so I know mine is gone. My question now is: do I buy a z-parts forged upper? Anyone got any experience with those? I would love an original TM but they are just not possible to get hold of. Link to comment Share on other sites More sharing options...
C-Diddy Posted March 22, 2022 Share Posted March 22, 2022 New scope and mount ready to go... ...and installed. Just waiting on a new Surefire M600 clone to replace the light, then I'll be done with this one. Then to tweak the MK18 build 🤔🤣 Wild Weasel, Shizbazki, lokkers and 1 other 3 1 Link to comment Share on other sites More sharing options...
Sylithics Posted March 25, 2022 Share Posted March 25, 2022 Hey guys Playing about with my Mws and was wondering what is still the best bucking and nub combo? Guessing it’s still the metal nub and something? Don’t think I’ll get a metal nub as haven’t heard back for a while. Was using a ml mr hop silicone and omega nub for plinking in the back garden but the consistency sucked.. went back to stock nub and used 3’s and it’s brilliant. First game on Sunday can’t wait 😎 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now