Supporters M_P Posted June 20, 2018 Author Supporters Share Posted June 20, 2018 Got some PTS epm mags this morning for my recoil so took the time for another photo Still needs a rear buis and a few other bits- notably a different stock (probably a CTR) but it's getting there proffrink, Druid799, ibo7 and 1 other 4 Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted June 22, 2018 Supporters Share Posted June 22, 2018 Bert you been sniffing glue again ?😂😂 ibo7, Duff and djben9 1 1 1 Link to comment Share on other sites More sharing options...
Moderators djben9 Posted June 22, 2018 Moderators Share Posted June 22, 2018 where the kitchen sink?!! Duff 1 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted June 22, 2018 Supporters Share Posted June 22, 2018 Actually got it pretty close, good job to the creator. Link to comment Share on other sites More sharing options...
Albiscuit Posted June 22, 2018 Share Posted June 22, 2018 2 hours ago, Druid799 said: Bert you been sniffing glue again ?😂😂 One of the best things about the film!!! Look pretty flipping close! I was VERY tempted to build this off my Krytac Vector but would be more than im willing to pay and not very practical from a skirmish point of view!! Link to comment Share on other sites More sharing options...
Guest Posted June 22, 2018 Share Posted June 22, 2018 This is more like it, new Rhesus custom trigger installed in the KWA Vector. Adjustable and light action, I love it. Not a bolt in fit though, took most of yesterday afternoon and a couple of hours this morning Link to comment Share on other sites More sharing options...
Popular Post witchcraft58a Posted June 22, 2018 Popular Post Share Posted June 22, 2018 this is not another Vector..... But my CQB project which is nearing completion, pretty much scratch build less the g&g gearbox and wiring! I'm really pleased how it came out, it shoots like a lazer although not chrono'd yet.... still got some bits to do inc. retro arms trigger, gearbox overhaul and extended mag release on the right hand side. Been a great learning project! hope you guys like! Guyver1, EDcase, Druid799 and 2 others 3 2 Link to comment Share on other sites More sharing options...
Guest Posted June 23, 2018 Share Posted June 23, 2018 Another, different, “shroud” for the Vector. This one is Angry Gun, much shorter than the genuine KRISS version, but I like it Link to comment Share on other sites More sharing options...
MisterG Posted June 23, 2018 Share Posted June 23, 2018 Without a mag in, it looks like it would take .50 cal bullets. Now that would be something. Link to comment Share on other sites More sharing options...
mightyjebus Posted June 23, 2018 Share Posted June 23, 2018 SeniorSpaz87 and Albiscuit 2 Link to comment Share on other sites More sharing options...
emilianoksa Posted June 24, 2018 Share Posted June 24, 2018 On 17/06/2018 at 17:43, ibo7 said: Don't think I've done this yet, wot you think? My LCT AK Very nice. What make is the drum mag? ibo7 and Polluxtroy69 1 1 Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted June 24, 2018 Supporters Share Posted June 24, 2018 On 23/06/2018 at 14:05, mightyjebus said: Id replace the silver suppressor with a black one, and it'd be golden IMO. Nice to see another MRDS - does the mount allow the use of your irons?... Link to comment Share on other sites More sharing options...
mightyjebus Posted June 24, 2018 Share Posted June 24, 2018 1 hour ago, SeniorSpaz87 said: Id replace the silver suppressor with a black one, and it'd be golden IMO. Nice to see another MRDS - does the mount allow the use of your irons?... yeah irons can be viewed through the mount. I'm actually in the process of designing and printing off a new front end. I'll post a picture when its finished. Albiscuit and SeniorSpaz87 2 Link to comment Share on other sites More sharing options...
Supporters M_P Posted June 25, 2018 Author Supporters Share Posted June 25, 2018 Sun's out guns out Albiscuit and P13 2 Link to comment Share on other sites More sharing options...
Albiscuit Posted June 25, 2018 Share Posted June 25, 2018 13 hours ago, mightyjebus said: I'm actually in the process of designing and printing off a new front end. I'll post a picture when its finished. Certainly interested in the outcome!! Link to comment Share on other sites More sharing options...
ibo7 Posted June 25, 2018 Share Posted June 25, 2018 17 hours ago, emilianoksa said: Very nice. What make is the drum mag? I've never actually used it so couldn't tell you! It came with it and 8 mags when I bought it. Just looks badass though Link to comment Share on other sites More sharing options...
mightyjebus Posted June 25, 2018 Share Posted June 25, 2018 finished the first prototype. This is based on the HB industries Evo Scorpion rail. I made the 6.84 inch version but it should be easy to make the other versions now I have the basic shape. I printed out in grey as this was the filament i had in my printer and since it's a prototype it's not an issue. I'll print in Black when I'm finished messing around with a few bits. Polluxtroy69, M_P and Wo1f 1 2 Link to comment Share on other sites More sharing options...
Polluxtroy69 Posted June 25, 2018 Share Posted June 25, 2018 Here's my first airsoft gun which is the UMP(G). Front grip, holosight, suppressor which has a tight bore barrel that goes up to the end of the suppressor. I use mid cap mags with it as they're much more reliable that the high cap. Probably going to fit a pressure pad with flash light at some point. And also get a shorter barrel so I can remove the suppressor as and when I need Rate or slate, but take it easy I am new to the forum 😂 Duff, E21A, Wo1f and 1 other 2 2 Link to comment Share on other sites More sharing options...
Polluxtroy69 Posted June 25, 2018 Share Posted June 25, 2018 'my girlfriend's a vegetarian, which pretty much makes me a vegetarian' Got to love Pulp Fiction, so I'm taking that as a compliment. The mag pouches have been bought by the way. Spent some time this afternoon fitting the plate carrier which now fits very well. Duff 1 Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted June 26, 2018 Supporters Share Posted June 26, 2018 14 hours ago, Polluxtroy69 said: 'my girlfriend's a vegetarian, which pretty much makes me a vegetarian' Got to love Pulp Fiction, so I'm taking that as a compliment. The mag pouches have been bought by the way. Spent some time this afternoon fitting the plate carrier which now fits very well. Nice starter gun you got there , will work well in and outdoors . may think you look like a right Ming but testing your gears all good before you go scurmishing is a what needs to be done , too many times you see guys farting around with there gear on the day and wasteing time geting it right . you want to get that woman in order matey , if she’s a veggie good for her , but if you want meat ? You have some . If meat is murder , then murder tastes goooooooooddddddd ! 😍 Tackle 1 Link to comment Share on other sites More sharing options...
Polluxtroy69 Posted June 26, 2018 Share Posted June 26, 2018 1 hour ago, Druid799 said: Nice starter gun you got there , will work well in and outdoors . may think you look like a right Ming but testing your gears all good before you go scurmishing is a what needs to be done , too many times you see guys farting around with there gear on the day and wasteing time geting it right . you want to get that woman in order matey , if she’s a veggie good for her , but if you want meat ? You have some . If meat is murder , then murder tastes goooooooooddddddd ! 😍 Oh she's not a veggie I was just quoting Pulp Fiction as it was quoted before me haha! But I appreciate the feedback as it's the gun I needed to have! I'm going to give it a good clean; well as far as my knowledge takes me on cleaning it. Not sure on how I'd test the gears on it though. If you'd put a link or any advice, that would be welcome. Duff 1 Link to comment Share on other sites More sharing options...
MisterG Posted June 26, 2018 Share Posted June 26, 2018 1 hour ago, Polluxtroy69 said: Oh she's not a veggie I was just quoting Pulp Fiction as it was quoted before me haha! But I appreciate the feedback as it's the gun I needed to have! I'm going to give it a good clean; well as far as my knowledge takes me on cleaning it. Not sure on how I'd test the gears on it though. If you'd put a link or any advice, that would be welcome. I think he meant testing your gear (kit, equipment etc), not the gears in the gun. Of course I could have totally misread it 😉 I.e. check everything works, you have all the bits you need, battery charged. Adjust JPC correctly set up if you have one, try everything on/out beforehand etc. Cheers G Druid799 and Polluxtroy69 1 1 Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted June 26, 2018 Supporters Share Posted June 26, 2018 48 minutes ago, MisterG said: I think he meant testing your gear (kit, equipment etc), not the gears in the gun. Of course I could have totally misread it 😉 I.e. check everything works, you have all the bits you need, battery charged. Adjust JPC correctly set up if you have one, try everything on/out beforehand etc. Cheers G Correctamundo! PS it should say mong not Ming , autocorrect! 🤦♂️ Polluxtroy69 1 Link to comment Share on other sites More sharing options...
Polluxtroy69 Posted June 26, 2018 Share Posted June 26, 2018 4 hours ago, MisterG said: I think he meant testing your gear (kit, equipment etc), not the gears in the gun. Of course I could have totally misread it 😉 I.e. check everything works, you have all the bits you need, battery charged. Adjust JPC correctly set up if you have one, try everything on/out beforehand etc. Cheers G I am a little slow today. I completely get what you mean now. Gear/kit. I'm not really that thick you know. Even though I am a noob! Can not wait to get on a game. We were supposed to go tonight but I have a holiday to Croatia on the 9th and my wedding anniversary tomorrow so all my spare money is currently being used for other things 😭😭 Link to comment Share on other sites More sharing options...
mightyjebus Posted June 26, 2018 Share Posted June 26, 2018 Finished mid length rail Mid length rail with snap on additional RIS rails 3 lengths designed Long rail will have a longer thicker silencer on the end to give the MP5SD5 feel. P13, Polluxtroy69 and TheFull9 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now