Asomodai

This was a real tough one for me. Been slobbering over one ever since I started 3 years ago. Kept putting it off so I could purchase some really quite rare bullpups. Finally the king of the bullpup sniper rifles (That is usable, sorry WA2000) Pre Ordered SRS Silverback 16" Covert A2 in OD, Right handed model from @Fire Support. (They have done me a couple of solids in the past, so the business goes to them). Also purchased SBK M150 Spring, SRS Fast Hop, 3 additional SRS OD Steel mags. I am going to try and keep this setup for a while before I start going wild with upgrades. Just want it to lift .48s reliably and straight. Grabbed a Mosfet for my M249 and another Nuprol 1450Mah 7.4v Stick battery as my 3 year old ones are end of life. I am so bloody poor, its not even funny. But at least I will "hopefully" have this by the end of July. A proud addition to my bullpup armoury!

So I bit the bullet and loosened the purse strings. I couldn't find a Rapax Spring for 2J. (I dont want to joule creep so less power is fine and it means scope for a tighter barrel at somepoint). I just went for a standard SBK M150. Not fussed about the bolt pull really. Grabbed a 16" Covert A2 on Pre order. Fast Hop, M150 spring and 3 extra Steel mags.

Heya gents. Looking yet again at getting an SRS. Heart set on a Covert 16" A2. Want to lift .48s or heavier, not hugely interested in lots of finagling to get an extra knats chuff length of extra range either. Reading through looks like I need a Rapax 2j spring, fast hop, what bucking do I go with? Regards to mags. Are the plastic ones just as good as the metal ones?

From HWAirsoft. Two Lonex M4 Flash mags. Need to get some decent Hi Caps to see if they will feed faster then what I currently have.

My birthday is coming up and noticed that the AliExpress Vector Optics Outlet was having a sale. I only own one zoom scope and it came free with a JG SL8. The gun itself only cost £100. So I have never had a decent scope. Finally got a decent PSO for the SVU! I love the steel hammarite alike finish. Only £108! Also picked up a Vector Optics Tsyklon with SKS overlay. This will be for my SV98 Bolty clone. Only £36! I guess Vector optics are ok?

I asked them what their OEM is for the BB's. They claimed that it was multiple manufacturers and formulations. If that is indeed true then there will likely be varying quality between weights and types. I doubt they are any better then any other bb for the same money that is not manufactured by the parent company. They pay the manufacturing cost, then put a premium on top for the brand. I'll stick with OEMs own brand for the best value and similar quality. They dont make their own BB's so it's unlikely to be better then any other brand that does the same at the price point.

Both of the full auto G36 types have been upgraded. One has stock 18:1 gears with the stock SRC Neo High Torque motor. The other has 13:1 gears with a SLD 22tpa high torque. This happens on both with half charged 7.4v lipos. So I have my doubts its because the ROF is too high

In some I have, in some I haven't. They all have feeding problems regardless. I have sent the worst of which to Negative Airsoft to see what he makes of it.

I was thinking that. Its currently got a 3.6v NimH. I could change to a single cell 3.7v Lipo. But its so far behind in feeding speed I doubt it'll make a difference. Maybe a 6.6v Life. but it will likely burn out the motor or any fuses with such a high voltage jump.

I already have an A&K Drum mag, it wont feed fast enough either and is in fact worse then the Hi Caps. So I doubt that particular one will help either. 😕

Hello all. All of my upgraded G36 style rifles have issues feeding when using High caps on full auto. Only when I am continuously winding whilst firing full auto will the rifle feed correct. I am unsure if this is because of the spring tension being able to force the bb past the nozzle due to timing (Though there is already a delayer chip so the nozzle wont retract any longer then it does already) or because it just isn't possible to feed at around 18/20 rps. I do not seem to have this issue on my lone G&P Mid cap. Are there any QUALITY G36 high caps available that continuously feed at a good rate? All of my G36 mags came free with cheaper rifles. SRC and JGS. I would rather avoid midcaps as I would have to carry loads due to the relatively low capacity of them and they are quite huge! PS: I cannot use M4 Mag adapters as my XM8s magwells are fixed.

Interesting post that has been put on Zeroin yesterday https://forums.zeroin.co.uk/forum/classifieds/rate-a-trader/3141481-avenger63

Still on the fence grabbing one for myself, it is gorgeous though!

£209 brand new here. https://tienda.airsoftgandia.com/en/el/30492-aks74un-el-a104.html

AK2M4 SHS Rocket Motor for Dytac AK x3 ZCI Advanced 18:1 gearsets. One for Cybergun M249, one for Dytac AK and one for Xm8

I am 6,3 and quite lanky. I can just about with the stock extended. But its intended for when the stock is folded

Here is my new "Speedsoft" AK. It is not tacticool enough. Boom! Angled Aluminium Grip, Stubby Foregrip at the top for when the stock is folded and a new CYMA Rail cover. I think I need to get an even smaller foregrip though as the one I have on their just does not look right. Looking at this one for the moment. Side to side mag wobble on the Dytacs are known to be ridiculous. So had to velcro it up. Still wobbles, but does not make a noise anymore. Folded up.

More from AK2M4 SHS M4 Cylinder Head Silent for M249 SHS AK Cylinder head for Dytac AK AOE Silicon pads 3-5mm E&C Piston Head for the Dytac AK SHS Trigger Switch V3 for SL8 SHS M4 Nozzle for M249

How are you finding yours?

I actually was really tempted to buy one of those as well! But decided against it at the last moment. if I sell some bits and pieces in the next month I may buy it anyway

More bits from AK2M4. SHS 14 tooth lightweight piston head SHS AK Long type Nozzle SLD Piston head ZCI 433mm barrel Sorbo All for the new Dytac AK :)

I bought my first AK! I was going to go for an E&L, but they just weren't interesting enough for me to look at! However I had my eye on this for many months, love the SLR works look. But I didnt want to pay 250-300 quid for a tarted up Cyma. I guess this could be considered my "Speedsoft" loadout? Bleh. Queue TaiwanGun clearing the shelves and managed to snag this for £147 with an extra midcap and 4000 .25' bbs included in the price. Also bought. x3 Perun Basic Mosfets, one for the M249, one for an XM8 and one for the Dytac. x1 AK Reciever Cover rail to use a sight in a good position on the Dytac. x1 Aluminium V3 Cylinder Head for the Dytac x1 Guarder Clear Bucking for Dytac x1 FMA RIS Rail Foregrip for Dytac x1 MLOCK Angled foregrip for Dytac (Yes I am going to run two foregrips on it! The vertical will be for when the stock is folded. x3 500rd Cyma High Caps for AK x1 1000 BLS .48 bbs x3 2000 PJ .30 bbs x1 4000 PJ .20 bbs x1 8Fields Tactical sling for P90.