Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 13/07/19 in all areas

  1. Excuse me while i gbb m1 carbine.....
    4 points
  2. Comparing using training plates (lets say for 6 hours a time, twice a month) to a career spent humping bergans or whatever isn't super relevant imo. Likewise joint problems are just really, really common across the general population anyway - about 30% of the population have some kind of musculoskeletal disorder. Furthermore for all the benefits of physical activity you do run the risk of injury, whether its your lower back from squatting or your knees from running. Training plates aren't for me but if they make skirmishing a bit more challenging and fun for someone then crack on - its not a h&s concern imo. If you use a gbbr and have a water bladder you are close to training plate weights anyway.
    3 points
  3. I've applied for the Royal Marines so I'm using them for training and airsoft alike ๐Ÿ˜ And @TheFull9 I'm aware of the possibility of damaging knees etc. so I won't be running about for the full day with them but thanks for the 'concern' masked in smarmy sarcasm ๐Ÿ‘
    3 points
  4. hence the quotation marks, big man. lucky me won them in a raffle so should I have to ditch them I won't worry too much ๐Ÿ‘
    2 points
  5. S&T Tavor OD professional. https://www.crownairsoft.com/collections/rifles-assault-rifles/products/t21-carbine-a-e-g-with-e-b-b-odprofessional-version Only 95 quid but with 55 quid shipping.
    2 points
  6. They're super fashionable right now (because of crossfit, whether airsofters know it or not) and people who've not served don't know the inevitability of the lower-body joints injuries they have coming their way.
    2 points
  7. need some help guys, the question is... to paint or not to paint? and if I should paint, In what style? thanks in advance
    2 points
  8. Ajax

    Gun picture thread

    I have just finished my project just in time for tomorrow's game what do you think? This one has active spare mag retention. And because I had no holster which would fit this monster I design and made one. We will see tomorrow how good it is
    1 point
  9. There the ones from this helmet/mask combo bud . ๐Ÿ‘
    1 point
  10. Luke85

    Gun picture thread

    Guns, all of them...for now Seemed like the place to post
    1 point
  11. LoneWolf

    THE TM MWS thread

    Youโ€™re welcome my friend
    1 point
  12. In the voice of a pompous art critic, โ€œAnd here we have an artistic rendering of the reality of this statement as a picture . Batman riding a robot unicorn !โ€
    1 point
  13. Whisky1

    THE TM MWS thread

    Now that is one tricked out hottie... ๐Ÿ˜ I really like a distressed tan look, but I would always be reluctant to spray such a beautifully finished rifle.... Also is that a magpul Moe grip? ๐Ÿค”
    1 point
  14. Both ! ๐Ÿ˜‚๐Ÿ˜‚
    1 point
  15. 4.5kg (combined) training plates with The Divison inspired artwork
    1 point
  16. My love of Pyro continues! Ordered the 38mm Para Mortar from TLSFX Our resident NATO opposing force in our ongoing Milsim series likes to dig in deep - So will deal them some boom from above
    1 point
  17. I did basically the same thing with one I had as a project , I used a motorcycle helmet visor cut to shape and then stuck adhesive Velcro around the catch , made a small panel out of shaped kydex to go over it and job done . Another thing you can do is drill a small hole horizontally through the top section where it hinges up and put an Allen key in it (a slightly larger one than the hole so itโ€™s a tight fit and wonโ€™t come out by accident) no way thatโ€™s opening by accident! Ps you mite be hard pressed to get goggles underneath the visor , I have difficulty getting my normal glasses to sit comfortably and they have quite small frames as well .
    1 point
  18. itsme

    THE TM MWS thread

    Yesterday my rail came in so my friend at Repairsoft helped me out with the install. I went with the Madbull noveske NSR 7" freefloat rail. We went to try the PTS ring and the rail but it left too much space between the reciever and the rail. the ring was needed though but it didn't fit the barrel nut, it got stuck in there actually. Jeff milled the smallest ring so it would fit all the way into the barrel nut. This also fixed the space between the reciever and the handrail. With the handrail in place it was time to get the barrels to length. I didn't get a new barrel and wanted to cut the original down. After putting it in the milling machine we saw that the outer barrel was conical which was a bit of a problem but we managed to get the job done pretty quickly. Then we cut off the inner barrel so it stuck out a little further than the outer barrel so it would be just in front of the LED in my tracer. After that the outer barrel needed just a little bit of paint and the job was done. Loving this CQB build, looking forward playing with it in the near future. Only thing i'm looking for now is a real steel skeletonized pistol grip. Also i would like my vortex +- 1 inch higher without making it too bulky, minimalism is key imo. if anyone has an idea for that please let me know! Hope you guys enjoy the build aswel.
    1 point
  19. Just bought a Nissan Juke. Love it, but need to sell it or swap for a qashqai for the extra space.
    0 points
  20. https://eagle6.co.uk/shop/catalog/product/view/id/5607/s/pts-genuine-magpul-magazine-120rd-for-tokyo-marui-recoil-shock-m4-scar-416d-black/ I guess his logic on pricing is based on their rarity?
    0 points
ร—
ร—
  • Create New...