Jump to content
Airsoft Forums UK
Cameron364

The 'What have you just bought' Thread

Recommended Posts

Jack Pyke rifle sling in "English Woodland" £7.90 (eBay)

 

Silencer adapter for Well MB02 £12.99 (ASPUK)

 

Sling is to replace the cheap viper one I use on my sniper rifle at the moment. Adapter is to add a silencer to said rifle to make it even quieter - next purchase will be a sorbo pad of some description.

Share this post


Link to post
Share on other sites

King Arms SVD (Spring version) £90 including postage.

 

I should really stop buying stuff :/

Share this post


Link to post
Share on other sites

King Arms SVD (Spring version) £90 including postage.

 

I should really stop buying stuff :/

 

yeah that is gonna be a bit of bitch for cqb - should just stick to shotgun

long mofo to say the least - look out for the cocking aid unless you are into pinky finger building

Share this post


Link to post
Share on other sites

 

yeah that is gonna be a bit of bitch for cqb - should just stick to shotgun

long mofo to say the least - look out for the cocking aid unless you are into pinky finger building

Haha I can just imagine rolling up to a CQB site with it :D

Share this post


Link to post
Share on other sites

This patch arrived for me today... :-)!

 

_MG_8446.png

Share this post


Link to post
Share on other sites

christ

I love this!

Share this post


Link to post
Share on other sites

Is that my little pony in shades

 

Oh it sure is..!

Share this post


Link to post
Share on other sites

ATACS-FG boonie. Made in Ukraine by company ''Tornado''. Purchased from ''Symvolika'' shop in Lviv. A-tacs has really grown on me and it's pretty neutral and decent for casual use,the heat here is insane(Close to 40 degrees)

 

135 UAH, about 4 pounds sterling.

 

Not bad :D

 

9SBB73z.jpg

Share this post


Link to post
Share on other sites

More TaiwanGun goodies:

 

1 Red Dot sight (this time with mesh flash-killer!)

4 72-round grenades (for the newly-acquired M79 - still waiting for the M203 to arrive)

1 Speedloader (not shown)

 

Ordered Monday, arrived Thursday - less than £90 including delivery.post-8826-0-73774300-1437642986_thumb.jpg

Share this post


Link to post
Share on other sites

That looks great for 77 dollarydoos.

 

77 GBP im afraid, $77 and id have had a coyote brown one aswell :lol:

Share this post


Link to post
Share on other sites

Really fancied some Hexmags, so grabbed some other little bits while I was ordering from WGC. Lots of small pistol parts, I've had quite a few handguns 'in the shop' as it were and needing attention for ages, always tricky to get the little springs and screws etc I wanted to finish the builds.

 

19735413928_8e23acf7ae_b.jpg

 

  • 4 x Dytac Hexmag midcaps
  • Hexmag base plate/followers pack
  • PTS Comp
  • Ready Fighter Kimber 1911 mag bases
  • Guarder steel 1911 grip screws, black and chrome
  • First Factory extended PTS ACR handguard pin
  • Modify VSR/Pistol bucking
  • 3 x Stark G17 trigger springs
  • Mechanix Originals and 0.5mm Originals
  • AR-15 'TekMat'
  • MSM patch

Share this post


Link to post
Share on other sites

TMC's copy of the Crye AVS. Im usually not a fan of anything TMC make but seeing as they have recently started using genuine Multicam material I thought id give it a shot and for £77 shipped from ShooterCB, Im very impressed. Much more solidly put together than any of their older stuff. Only thing im unsure of is if it will accept real Crye Zip On panels and dissapointed it didnt come with the quick release cables, although I never use it anyway (It is one way of attaching the multiple cummerbunds though)

 

Comes with the Front M4 Flap

3 Band skeletel Cummberbund

1 Band Cummerbund

 

Ive added myself

Crye Shoulder pads

TS Crye JPC Mbitr pouches

Mayflower assault backpanel

Internal padding from my CPC

 

dsasadas_zpsd8vzmu1o.jpg

079CD2D5-76D8-49D9-BD11-491CD549D02D_zps

 

I've got one myself....had it since Christmas and its held up very well so far, really comfy to

Share this post


Link to post
Share on other sites

 

77 GBP im afraid, $77 and id have had a coyote brown one aswell :lol:

 

You can get the vest in grey/brown/green/black for £40 I believe

Share this post


Link to post
Share on other sites

 

Really fancied some Hexmags, so grabbed some other little bits while I was ordering from WGC. Lots of small pistol parts, I've had quite a few handguns 'in the shop' as it were and needing attention for ages, always tricky to get the little springs and screws etc I wanted to finish the builds.

 

19735413928_8e23acf7ae_b.jpg

 

  • 4 x Dytac Hexmag midcaps
  • Hexmag base plate/followers pack
  • PTS Comp
  • Ready Fighter Kimber 1911 mag bases
  • Guarder steel 1911 grip screws, black and chrome
  • First Factory extended PTS ACR handguard pin
  • Modify VSR/Pistol bucking
  • 3 x Stark G17 trigger springs
  • Mechanix Originals and 0.5mm Originals
  • AR-15 'TekMat'
  • MSM patch

 

Can you do a review of the hexmags when you've played them for a while? :)

Share this post


Link to post
Share on other sites

Well, I got to the U.S. of A and realized something about my current situation pertaining to this fabulous sport. I had basically no useable guns, an extremely limited load out, no gas, and only a few cheap batteries and BBs to go around... So let the games begin!

 

First off, I was working at the Rogers Holster Company, so I was able to get the following for cheap:

1x ProFit 578 left black holster

3x ProFit 578 left shims

1x ProFit 578 right shim

1x Universal Magazine Pouch belt FDE

4x Universal Magazine Pouch MOLLE FDE

4x Universal Magazine Pouch MOLLE black

1x Rogers Quick Attach Sight Mount

1x Rogers Rail Light

2x MLS Male FDE

2x MLS Female FDE

1x MMLS Male FG

1x MMLS Female FG

1x Paddle Mount left black

1x Belt Mount left black

 

So that got me the pouches and holsters I needed. Then I needed clothing and such. From PROPPER:

2x PROPPER STL II FDE

2x PROPPER STL II black

 

Now I can look proper (pun intended). But unless I want to throw budget BBs at people, I need guns. From my new US forum:

KAA Stoner LMG (happiness)

E&L AKS-74 (finally got an AK)

2x G&P AK 130 rnd midcaps

4x CYMA AK 130 rnd midcaps

 

From Tokyo Model:

1x Archives Ivory Frame

1x WEI Tech frame black/gold

1x Xcortech tracer/chronograph

 

From Evike:

1x 8.4v 1600MaH stick

1x smart charger

2000 0.25g Madbull Red Tracer BBs

1x Angel Customs 3 stage G17 recoil spring

 

From Airsoft Barracks (my local store):

1x WE G17 mag

1x Umarex Blow Back Gas

1x Python TBB 6.02mm G17 barrel

 

I think that's enough for now :)

Share this post


Link to post
Share on other sites

77 GBP im afraid, $77 and id have had a coyote brown one aswell :lol:

I'm bad at reading and I should feel bad.

 

 

Really fancied some Hexmags, so grabbed some other little bits while I was ordering from WGC. Lots of small pistol parts, I've had quite a few handguns 'in the shop' as it were and needing attention for ages, always tricky to get the little springs and screws etc I wanted to finish the builds.

 

<snip>

Let us know how those Hexmags go; I was going to grab some myself but went for the EPMs instead.

Share this post


Link to post
Share on other sites

Well, I got to the U.S. of A and realized something about my current situation pertaining to this fabulous sport. I had basically no useable guns, an extremely limited load out, no gas, and only a few cheap batteries and BBs to go around... So let the games begin!

 

First off, I was working at the Rogers Holster Company, so I was able to get the following for cheap:

1x ProFit 578 left black holster

3x ProFit 578 left shims

1x ProFit 578 right shim

1x Universal Magazine Pouch belt FDE

4x Universal Magazine Pouch MOLLE FDE

4x Universal Magazine Pouch MOLLE black

1x Rogers Quick Attach Sight Mount

1x Rogers Rail Light

2x MLS Male FDE

2x MLS Female FDE

1x MMLS Male FG

1x MMLS Female FG

1x Paddle Mount left black

1x Belt Mount left black

 

So that got me the pouches and holsters I needed. Then I needed clothing and such. From PROPPER:

2x PROPPER STL II FDE

2x PROPPER STL II black

 

Now I can look proper (pun intended). But unless I want to throw budget BBs at people, I need guns. From my new US forum:

KAA Stoner LMG (happiness)

E&L AKS-74 (finally got an AK)

2x G&P AK 130 rnd midcaps

4x CYMA AK 130 rnd midcaps

 

From Tokyo Model:

1x Archives Ivory Frame

1x WEI Tech frame black/gold

1x Xcortech tracer/chronograph

 

From Evike:

1x 8.4v 1600MaH stick

1x smart charger

2000 0.25g Madbull Red Tracer BBs

1x Angel Customs 3 stage G17 recoil spring

 

From Airsoft Barracks (my local store):

1x WE G17 mag

1x Umarex Blow Back Gas

1x Python TBB 6.02mm G17 barrel

 

I think that's enough for now :)

Ah you have access to Evike without the ridiculous charges... Always wanted a specific item from there, but with all the charges, it comes to too much for what it is... They've got some great stuff though

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×