emilianoksa Posted August 3 Share Posted August 3 3 hours ago, Impulse said: I don't usually like getting metal slides for my TM pistols because I love how efficient the plastic slides are... but my hi-capa slide snapped at the front when the front sight was ripped out by some very determined brambles that I was wading through (the bottom part of the Worthing Airsoft site is basically unplayable at the moment...) So my hi-capa now has a metal slide. Surprisingly snappy still on green gas at room temperature thanks to the lightweight blowback unit and probably feels the best to shoot due to the fact it's still snappy but the metal slide has some weight to it; might get a bigger recoil spring, but we'll see. Will be running it on propane anyway, so here's hoping it'll be fine in the winter too. Gunsmith Bros? Link to comment Share on other sites More sharing options...
Impulse Posted August 3 Share Posted August 3 4 hours ago, pyromancer6 said: Not normally a fan of 2011s to be honest but this one has tickled my fancy - any clue where you got that supressor from? Looks ace It's one of ak2m4's ones. It's out of stock at the moment, but it's really nice: https://www.ak2m4.co.uk/external-parts/suppressors/xt-suppressor-long-155mm 1 hour ago, emilianoksa said: Gunsmith Bros? Yeah. It's the Gunsmith Bros XCarry 5.1 slide. I didn't like a lot of the metal slides because they just looked a bit too... much? I like my simple guns, so all the metal slides with holes all over them and weird geometric patterns... no thank you pyromancer6 1 Link to comment Share on other sites More sharing options...
pyromancer6 Posted August 3 Share Posted August 3 25 minutes ago, Impulse said: It's one of ak2m4's ones. It's out of stock at the moment, That's good luck - otherwise it'd be going in my next order I'm having to make real soon and I need to save some money 😅 Impulse 1 Link to comment Share on other sites More sharing options...
Barny Posted August 6 Share Posted August 6 New Placard Pouch, Aussie Peelback bought from Kitpest - great little shop full of goodies And below, some brilliant .308 pouches from British Tactical for the MTW gavinkempsell and Ian Bru 2 Link to comment Share on other sites More sharing options...
Impulse Posted August 7 Share Posted August 7 Ok, so I went and bought a bunch more stuff, but my Longbow order is delayed due to customs being customs. Jason gave me a call today to explain and said he'd throw in a bottle of .45s for the inconvenience, but it means I won't be able to test the build for another two weeks as my local site is only once every two weeks and I won't get it by this weekend Ah well, at least basically the entire internal build arrived. Mega impressed that the Orga barrel arrived, as I ordered it from Japan on Saturday and it arrived today! Missing the rifle, suppressor, fast hop unit and pouches for the magazines, as that was my longbow order. gavinkempsell 1 Link to comment Share on other sites More sharing options...
Popular Post HuttArmouries Posted August 10 Popular Post Share Posted August 10 May have gone on a bit of a compact pistol spree djben9, ButcherBill, Egon_247 and 2 others 5 Link to comment Share on other sites More sharing options...
Cannonfodder Posted August 12 Share Posted August 12 A new pair of boots from Militarymart. Unfortunately some absolute muppet decided the best way to mark the size of said boots is to write it on the top of the toe in white marker pen. ButcherBill 1 Link to comment Share on other sites More sharing options...
ButcherBill Posted August 12 Share Posted August 12 Ian Bru 1 Link to comment Share on other sites More sharing options...
Cannonfodder Posted August 12 Share Posted August 12 1 minute ago, ButcherBill said: Don't worry, I've got plenty of that stuff. The trouble is that sometimes the ink can still be visible through the polish so it really needs to be removed. I tried a wet cloth but that did nothing so tried alcohol based hand sanitiser and that started to take it off very slowly. Yes this is only a minor issue that can be sorted relatively easily, but what annoyed me is that it didn't need to happen at all if the shop staff had used a little common sense. ButcherBill 1 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted August 12 Supporters Share Posted August 12 What type of boots out of interest? Presumably surp? I could imagine either the military stores pers or perhaps the contract folks who deal with surplusing things just slapping numbers on like that in the lowest effort/quickest to read method they could come up with. Like to hope that wouldn't be a retailer defacing their own stock like that anyway lol, best of luck getting it cleaned off. Link to comment Share on other sites More sharing options...
Cannonfodder Posted August 12 Share Posted August 12 They're German para boots. You're right that it could've been on there before getting to the shop but the ink looked quite fresh. Luckily the hand sanitiser has done the job after a few more tries TheFull9 1 Link to comment Share on other sites More sharing options...
rj1986 Posted August 13 Share Posted August 13 On 03/08/2024 at 15:06, Impulse said: I don't usually like getting metal slides for my TM pistols because I love how efficient the plastic slides are... but my hi-capa slide snapped at the front when the front sight was ripped out by some very determined brambles that I was wading through (the bottom part of the Worthing Airsoft site is basically unplayable at the moment...) So my hi-capa now has a metal slide. Surprisingly snappy still on green gas at room temperature thanks to the lightweight blowback unit and probably feels the best to shoot due to the fact it's still snappy but the metal slide has some weight to it; might get a bigger recoil spring, but we'll see. Will be running it on propane anyway, so here's hoping it'll be fine in the winter too. Some of the higher end metal slides are still super snappy. I have a detonator CNC slide on a HK45 and it's still just as good as the plastic despite the extra weight. Impulse and Lozart 2 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted August 13 Supporters Share Posted August 13 If it weighs more and transfers thermal energy faster, it's probably not gonna perform the same as the plastic gas efficiency wise, can't really beat the science on that one I don't think. But hey if it's close enough and works for you in use then all good end of the day. Link to comment Share on other sites More sharing options...
GothicGhost Posted August 14 Share Posted August 14 Bought a PDW stock for my MWS, it needs some DIY for it to fit on a stock lower. ButcherBill 1 Link to comment Share on other sites More sharing options...
Popular Post mightyjebus Posted August 17 Popular Post Share Posted August 17 went to Red Alert's boot saleamathingy today and picked up a bit of a bargain. It's a PTS Masada for £80. Tackle, seanieglasgow, Jacob Wright and 8 others 6 5 Link to comment Share on other sites More sharing options...
Jacob Wright Posted August 18 Share Posted August 18 14 hours ago, mightyjebus said: went to Red Alert's boot saleamathingy today and picked up a bit of a bargain. It's a PTS Masada for £80. What a deal! I remember wanting one of those when they first came out! Link to comment Share on other sites More sharing options...
mightyjebus Posted August 18 Share Posted August 18 yeah, I think I got a good deal. it had a torn hop rubber (swapped for a Green G&G) and it would fire on safe but that's a known issue and took about 5 minutes to fix. It also has the Wii Tech hop up fitted so a nice little bonus as well. Jacob Wright 1 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted August 18 Supporters Share Posted August 18 I've been treating mine like The One Ring since like.. 2012 or whenever it was they came out (keep it secret, keep it safe). Hell of a find with the rail and short barrel. mightyjebus 1 Link to comment Share on other sites More sharing options...
ButcherBill Posted August 19 Share Posted August 19 Not sure if I've technically 'bought' this but I've had another cocking handle & screw for my L85A3 delivered from Ares in Tiawan. Only paid for 1 so which one is free? pyromancer6 1 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted August 26 Share Posted August 26 (edited) Bought a Holy Warrior Sig Romeo 8T clone for the Sig 553 Wasnt too impressed with the parallax before it was fitted and the reticle looked wonky. But having fitted it and looking at it down the replica it’s very nice. Nice trademarks, suits the rif 👌 Edited August 26 by Enid_Puceflange ButcherBill 1 Link to comment Share on other sites More sharing options...
Amokura Posted August 27 Share Posted August 27 Took some time to arrive. PKM with muzzle brake. ButcherBill and GenuineGerman 1 1 Link to comment Share on other sites More sharing options...
jlb Posted August 27 Share Posted August 27 Vipertech M727, expensive but well worth it. Had two really good outing so far at borderlands running c02 mags. Will be getting a hpa rig together soon with a hi cap clamped to a vfc gas mag.. pyromancer6 and ButcherBill 1 1 Link to comment Share on other sites More sharing options...
Moderators Popular Post Jez_Armstrong Posted August 27 Moderators Popular Post Share Posted August 27 Picked up a new JG G3 MC51 last week from patrol base Went to an airsoft boot fair on Sunday, picked up a JG G3 (Turned that into a G3SBS already) , red dot acog and 5x cyma mp5 mags and a shotgun The shotgun cost me £10 and was told it doesn't rack and it was a tri shot, turned out to be a golden eagle m870 breacher and it only occurred later that day as I inspected it that it was a gas one Needed 3 new orings, one new valve and the arms bending back straight so it didn't lock up multiple screws tightening, 3d printed an end cap that was missing and a shell holder, 3d printed a belt clip holder and attached a quick harness to the gun and ran the strap down the shoulder harness. Now I have a breaching shotgun It slings 3 x 0.28's like 50m+ 😂 All for £10 Also grabbed two MP5's this morning off a friend who wanted to shift a few guns to purchase a new one, £100 for the pair 👌 one CA and one JG pyromancer6, ButcherBill, Lozart and 2 others 2 3 Link to comment Share on other sites More sharing options...
JinxDuh Posted August 27 Share Posted August 27 8 hours ago, Amokura said: Took some time to arrive. PKM with muzzle brake. If you don’t mind me asking, where did you get it from? All I’ve found is the wooden furniture one over here Link to comment Share on other sites More sharing options...
Supporters Lozart Posted August 27 Supporters Share Posted August 27 2 hours ago, Jez_Armstrong said: Picked up a new JG G3 MC51 last week from patrol base Went to an airsoft boot fair on Sunday, picked up a JG G3 (Turned that into a G3SBS already) , red dot acog and 5x cyma mp5 mags and a shotgun The shotgun cost me £10 and was told it doesn't rack and it was a tri shot, turned out to be a golden eagle m870 breacher and it only occurred later that day as I inspected it that it was a gas one Needed 3 new orings, one new valve and the arms bending back straight so it didn't lock up multiple screws tightening, 3d printed an end cap that was missing and a shell holder, 3d printed a belt clip holder and attached a quick harness to the gun and ran the strap down the shoulder harness. Now I have a breaching shotgun It slings 3 x 0.28's like 50m+ 😂 All for £10 Also grabbed two MP5's this morning off a friend who wanted to shift a few guns to purchase a new one, £100 for the pair 👌 one CA and one JG Damn you, Jez I was waiting for payday to pick up that MC51. Bloody sold out now. You bastard. ButcherBill 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now