Supporters Sitting Duck Posted March 1, 2015 Supporters Share Posted March 1, 2015 +1 likey for da motor - I need to get some more too & replace the ferrite ones on some of mine (great rof & improvement all round once deans & fet'd even on lower juice batteries) Ian_Gere 1 Link to comment Share on other sites More sharing options...
Guest PT247 Posted March 1, 2015 Share Posted March 1, 2015 Ummm, so much for letting my bank account recover for a few months.... UF PRO Striker XT trousers and combat shirt, UF PRO Striker combat jacket, UF PRO baseball cap, (all in Slocam) UF PRO elbow and knee armour, MOLLE Vertical air tank pouch (olive drab), Condor Tactical Ronin MOLLE chest rig (olive) I really REALLY need to sell a motorbike lol Link to comment Share on other sites More sharing options...
Airsoft_Mr B Posted March 1, 2015 Share Posted March 1, 2015 TheFull9, Monty and team flex 3 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted March 1, 2015 Supporters Share Posted March 1, 2015 +1 likey for da motor - I need to get some more too & replace the ferrite ones on some of mine (great rof & improvement all round once deans & fet'd even on lower juice batteries) Yeah, to bring my new RPK inline with my "armoury" I'll be swapping it to Deans and rewiring it to take Turnigy Nano Tech 11.1V LiPo's under the top cover, rather than in the stock where the battery fits OOTB and I have a Burst Wizard BW3 MOSFET lurking in my bits box which has a pre-cocking function, as well as the AB necessary for 11.1 volts. My plan for the RPK in the fullness of time is to set it up with a high cycle rate, hence the POM double O-ring cylinder head I ordered with the RPK as opposed to the aluminium Magic Box design, but eventually I will DMR it using a mechanical semi-auto only lock off. I'll be keeping it as a high FPS support weapon for the Balshoy Bolshevik Bash though so, if I manage to sort out programming the BW3 in the time I have between receiving it and the Bash, I will tune the ROF down to a real world figure - apparently it sounds great with this MOSFET because it keeps the fast cycle rate and introduces a delay between, in effect, discrete semi-auto shots. But my track record with programming BW MOSFET's isn't good, so this may all prove to be academic... kerby91 1 Link to comment Share on other sites More sharing options...
Airsoft_Mr B Posted March 1, 2015 Share Posted March 1, 2015 5.11 Double Duty 1.5" TDU Belt Link to comment Share on other sites More sharing options...
Popular Post Snakeeyes75 Posted March 1, 2015 Popular Post Share Posted March 1, 2015 Finished my VSR and also I had to buy the M249 para as it was such a great price! Airsoft_Mr B, team flex, Lozart and 3 others 6 Link to comment Share on other sites More sharing options...
Bottledtorment Posted March 1, 2015 Share Posted March 1, 2015 As promised here's the photos of my clone JPC (really bad quality but has spurred me to buy a real one) at some point and the Modular pack which definately needs modding to stop it catching on my belt Airsoft_Mr B, Monty and Ian_Gere 3 Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted March 1, 2015 Supporters Share Posted March 1, 2015 My w700 kitted out, nice btw snake, I went with woodland on the stock, not barrel, but to each his own. It's a uhc w700 with a TM VSR 10 rail, a ZOS 2-6x32AOE scope, with an Emerson two point sling, black cheek rest with pouch and elastic for 12 rounds, mine are inert 30 06 rounds that have been repressed, not hammered, making them look more realistic. *Edit Not quite sure why that scope pic keeps flipping... Oh well... Zak Da Mack and Airsoft_Mr B 2 Link to comment Share on other sites More sharing options...
mcduff1979 Posted March 2, 2015 Share Posted March 2, 2015 Yeeeeeess, so comfy :-) who makes this it looks awesome? Link to comment Share on other sites More sharing options...
Mack Posted March 2, 2015 Share Posted March 2, 2015 who makes this it looks awesome? Its a CRYE CPC, The price is awesome too Airsoft_Mr B and team flex 2 Link to comment Share on other sites More sharing options...
Zak Da Mack Posted March 2, 2015 Share Posted March 2, 2015 Went skirmishing yesterday down at apocalypse airsoft. Managed to pick up a serpa which I've loosened a little by sticking it in some boiling water, but it's still a little tight. Also just bought an RIS rail off of SimonQuigley in my feeble attempt to try and build a L119A1 Ian_Gere 1 Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted March 2, 2015 Supporters Share Posted March 2, 2015 Gosh darnit, spending too much... Just got a few more things... Vegetato set from Airsoft_Mr B, £30, a new ZCA 60 rnd 40mm grenade (brings total up to three), £22, a basic coyote tan double 40mm grenade MOLLE pouch, £7, WE Nuprol 4.0 gas (black), £17, WE Nuprol 2.0 gas (green), £12, ICS folding foresight, £22, and about to order a custom Velcro patch with Spaz and Rogers on it (if I can still afford it). Oh, and a mock silencer that fits my new M4A1 from BigAl, as my B&T tracer is about 1/8 of a mm too large... Shame, I guess not tracer for me... There's now an extra 6000 tracer round sitting around my room :/ Airsoft_Mr B and team flex 2 Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted March 2, 2015 Supporters Share Posted March 2, 2015 Its a CRYE CPC, The price is awesome too With a price tag that high (unless there is something I'm missing), it better allow you to levitate, see through walls, bend pellets mid-flight, and project a force field around you... team flex, Ian_Gere and Lozart 3 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted March 3, 2015 Supporters Share Posted March 3, 2015 Oh, and a mock silencer that fits my new M4A1 from BigAl, as my B&T tracer is about 1/8 of a mm too large... Shame, I guess not tracer for me... There's now an extra 6000 tracer round sitting around my room :/ There's a Madbull hopup chamber with built in tracer illuminator for M4's. That could be a way forward for you - iirc it's not such a stupid price, compared to other Madbull kit that is Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted March 3, 2015 Supporters Share Posted March 3, 2015 There's a Madbull hopup chamber with built in tracer illuminator for M4's. That could be a way forward for you - iirc it's not such a stupid price, compared to other Madbull kit that is Hmm... Gonna need to sell a few more organs to be able to get anything right now, but who knows, I sometimes babysit for some rich people . Might get lucky. Anyway, I only have experience with one AEG gearbox (from a P90, which is considered to be the easiest to work with, yet still took me more than an hour to get the stupid spring to hold still long enough for me to jam it all back together...), so I'd have to find some sort of in depth tutorial explaining how to do this, else I would fudge it up... team flex 1 Link to comment Share on other sites More sharing options...
AirsoftTed Posted March 3, 2015 Share Posted March 3, 2015 Hmm... Gonna need to sell a few more organs to be able to get anything right now, but who knows, I sometimes babysit for some rich people . Might get lucky. Anyway, I only have experience with one AEG gearbox (from a P90, which is considered to be the easiest to work with, yet still took me more than an hour to get the stupid spring to hold still long enough for me to jam it all back together...), so I'd have to find some sort of in depth tutorial explaining how to do this, else I would fudge it up... Hop up changing doesn't involve the gear box bud! Ian_Gere 1 Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted March 3, 2015 Supporters Share Posted March 3, 2015 dunno how good but don't think you can get them much cheaper: http://www.tinywind.com/dragon-fluorescent-full-auto-tracer-illuminator-unit-14mm-coyote-brown-p-13202.htmlhttp://www.tinywind.com/auto-tracer-silencer-round-type-14mm-p-11224.html Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted March 3, 2015 Supporters Share Posted March 3, 2015 dunno how good but don't think you can get them much cheaper: http://www.tinywind.com/dragon-fluorescent-full-auto-tracer-illuminator-unit-14mm-coyote-brown-p-13202.html http://www.tinywind.com/auto-tracer-silencer-round-type-14mm-p-11224.html I already have a B&T tracer; my issue is that it is just a touch too wide; these probably will be too. and I know the hop isnt part of the gearbox; just havent messed ariund with my new M4s internals besides rewiring it. Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted March 3, 2015 Supporters Share Posted March 3, 2015 if you buy the madbull hop the tracer bit is still extra - usually so read the small print on exactly what you are buying..... Also once the led's are wired in it usually is usually on all time unless you wire in a switch (could wire into trigger but you'd want it on for a little while to illuminate the tracer bb's I guess) Link to comment Share on other sites More sharing options...
Supporters Lozart Posted March 3, 2015 Supporters Share Posted March 3, 2015 You could get some Incentive Designs tracer mags. I have a couple and they're pretty good. Bright enough to see where you're firing but not as bright as a silencer type. Not always a bad thing. kerby91 1 Link to comment Share on other sites More sharing options...
Airsoft_Mr B Posted March 3, 2015 Share Posted March 3, 2015 SRC P42 Case + other stuff from TaiwanGun Black mandible / face pro thing sold out so I've ordered one with a skull on for a bit extra. Was going to get coyote but would look out of place. £82 w/ £10 delivery Shame about having to spend like £250 for free shipping now...but the case is £40 so even with shipping on top it's still £10-£15 cheaper than the UK. (They're £60 from Zero One, must be ~£6 postage too) Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted March 3, 2015 Supporters Share Posted March 3, 2015 You could get some Incentive Designs tracer mags. I have a couple and they're pretty good. Bright enough to see where you're firing but not as bright as a silencer type. Not always a bad thing. Yea, but with the cost of one mag equal to that for the hop, I would probably just get the hutu. Link to comment Share on other sites More sharing options...
Supporters Lozart Posted March 3, 2015 Supporters Share Posted March 3, 2015 Yea, but with the cost of one mag equal to that for the hop, I would probably just get the hutu. Fair enough. I have heard though that it's not great either as a hop unit OR a tracer. Not actually used one though so I can't really confirm. Airsoft_Mr B 1 Link to comment Share on other sites More sharing options...
Mr Monkey Nuts Posted March 3, 2015 Share Posted March 3, 2015 Remember the madbull hop up needs the led unit to work, lots of places sell them separately. It's about £60 all in. You could always DIY it ... http://unconventional-airsoft.com/2007/11/19/tracer-unit-built-into-magazine/ Link to comment Share on other sites More sharing options...
Supporters Samurai Posted March 3, 2015 Supporters Share Posted March 3, 2015 If you are doing DIY, it's much better to put it in the hopup IMO. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now