Airsoft_Mr B Posted April 6, 2014 Posted April 6, 2014 This. Esoterick, Zak Da Mack, TacMaster and 1 other 4
remus Posted April 6, 2014 Posted April 6, 2014 a second hand tm super 90. needs a bitta work but so far feels better than my last shotgun which i loved but sold for profit...
Sam_G Posted April 7, 2014 Posted April 7, 2014 Yeap thats a 3rd WAS TACO pouch....this ones the rifle and pistol mag version.
CaptainSwoop Posted April 7, 2014 Posted April 7, 2014 so you can carry your lunch? Is a Taco the best food to carry though?
Supporters Liam Porter Posted April 7, 2014 Supporters Posted April 7, 2014 Oh come on Nick! It's not even half 11 and I'm already at the weird end of YouTube! Nickona, M_P and Ian_Gere 3
SgtTalbert Posted April 7, 2014 Posted April 7, 2014 1 x WE Glock 17 mag 1 x WE Green Gas1 x Bolle Rush+ Platinum Safety Glasses Twilight
Supporters Monty Posted April 7, 2014 Supporters Posted April 7, 2014 6mm bearings, shims, sorbo pads, aimpoint, spray paint, primer and a metal file. (Around £30 spent!)
Sam_G Posted April 8, 2014 Posted April 8, 2014 My WAS Quick mags turned up today. Fantastic service from UKTactical! The pouches are fantastic, as i would expect from Warrior. A bit of a fiddle to get set up just so but are now set and fitted to my DCS. No need to make any adjustment to use either my recoil Pmags or my M14 mags. VERY happy. Just need another 2 and i'm set. M_P, Airsoft_Mr B and Esoterick 3
Guest PT247 Posted April 8, 2014 Posted April 8, 2014 4500 psi 1.1l HPA tank and a remote hose kit/reg for my M700
Happy Posted April 8, 2014 Posted April 8, 2014 Just manned up and brought a TM High Cycle AUG plus mags... Been eyeing one up for a while now and managed to find it at a sub £300 price. Right now I'm finding a new place to hide the receipt from my girlfriend haha
Supporters Arden Posted April 8, 2014 Supporters Posted April 8, 2014 I've bought new mtp trousers with inter grated knee pads Mtp base ball cap Z tactical sordins Ptt to fit my radio And a drying frame / cleaning set for my hydro bag
Supporters Arden Posted April 8, 2014 Supporters Posted April 8, 2014 Oh and some mag pulls for my m4 mags
Supporters Monty Posted April 8, 2014 Supporters Posted April 8, 2014 About those bearings that I bought.. THEY DON'T FIT ON THE BEVEL GEAR. Oh well, bevel gear now has a bushing on one side and a bearing on the other.. It'll be fine.. I hope. (Couldn't get the other bearing off.)
Unrustle_Thine_Jimmies Posted April 8, 2014 Posted April 8, 2014 Mixing bushings and bearings for maximum smoothness has been done before,but don't run different bushings on the same gear! Try get it off,and run the bevel with bushings. Don't risk imploding your gearbox. The friction and stress will be unequal and could lead to some catastrophic results
Lowlander Posted April 8, 2014 Posted April 8, 2014 Amoeba cg-003 m4 carbine - black, Amoeba programmer, airsoft surgeon VSR hop rubber. WE WEpoint E1 RDS
Supporters Ian_Gere Posted April 9, 2014 Supporters Posted April 9, 2014 About those bearings that I bought.. THEY DON'T FIT ON THE BEVEL GEAR. Oh well, bevel gear now has a bushing on one side and a bearing on the other.. It'll be fine.. I hope. (Couldn't get the other bearing off.) Try chilling the whole thing in a freezer then use a lighter (preferably a turbo flame for soot-free operation) to heat just the bushing - that should get them apart. Monty 1
Supporters Monty Posted April 9, 2014 Supporters Posted April 9, 2014 Mixing bushings and bearings for maximum smoothness has been done before,but don't run different bushings on the same gear! Try get it off,and run the bevel with bushings. Don't risk imploding your gearbox. The friction and stress will be unequal and could lead to some catastrophic results Thanks for the heads up. I think I'll have to get another bevel gear if I absolutely cannot get this bearing off. Shouldn't be expensive.
Guest PT247 Posted April 10, 2014 Posted April 10, 2014 FALCON 6.03 Precision Inner Barrel Set for my KJW M700
Supporters Ian_Gere Posted April 10, 2014 Supporters Posted April 10, 2014 Couple of Dream Army H-Nubs banged onto an order for 2 x Well R2 (Vz61 Scorpion) locaps $26 posted from KH Mountain - i'm pretty sure that they're going to say OOS, but we shall see. Anyway, this does herald the completion of the LiPo conversion I was doing (the first Gate Pico AB MOSFET turned out to have no semiconducting properties; in effect a wire but Frank @FS was happy to replace it tout suite).
Russe11 Posted April 10, 2014 Posted April 10, 2014 WW2 shape maroon beret from Epic Militaria. Also bidding on a cap badge on ebay. Apparently appropriate headwear is needed for the post game piss up at WW2 events. I didn't want a Para cap badge so am going for Royal engineers. Little known fact: Royal engineers were at the Arnhem bridge and just about everywhere that airbourne troops were used. No point dropping airbourne troops to capture bridges if no-one can defuse explosives should the Germans plan to blow it up.
Guest PT247 Posted April 10, 2014 Posted April 10, 2014 Damn it, why can't shops keep their stock lists up to date? Just had an email from the only place I could find selling the Falcon TBB saying it is out of stock. E-Hobby Asia are also not replying to my queries as to when they will have it back in stock too.Anyone know a place that sells them other than ehobby-asia and Scopeandlaser?
Supporters Ian_Gere Posted April 10, 2014 Supporters Posted April 10, 2014 See if you can find one on here mate.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now