Jump to content

What have you made?


AK47frizzle

Recommended Posts

37 minutes ago, RostokMcSpoons said:

Contrast that sterling effort from Mr Chewer with me rocking up at Special Ops with one of those big blue plastic Ikea bags with three or four guns poking out, and a rucksack full of mags 'n' shit ;D


 

8E82981E-594F-4969-939D-CA0E76F62E10.jpeg.159d4b276ff08a0a6f3480c80196325d.jpeg

Link to comment
Share on other sites

  • Supporters
11 hours ago, Skullchewer said:

I knew you'd get it 🤣

 

I'm a little disappointed that the rifle doesn't say "Vera" on it anywhere.

Just to add I am sat wearing this sweatshirt...

 

BLUE-SUN-FIREFLY-INSPIRED-PEACH-FINISH-ZIP-UP-HOODED-TOP-BY-LAST-EXIT-TO-NOWHERE-NAVY-5-_DJs7XZo.thumb.jpg.b7e1f11149eb29e2975381ddd4210ab0.jpg

Link to comment
Share on other sites

3 hours ago, Lozart said:

 

I'm a little disappointed that the rifle doesn't say "Vera" on it anywhere.

Just to add I am sat wearing this sweatshirt...

 

BLUE-SUN-FIREFLY-INSPIRED-PEACH-FINISH-ZIP-UP-HOODED-TOP-BY-LAST-EXIT-TO-NOWHERE-NAVY-5-_DJs7XZo.thumb.jpg.b7e1f11149eb29e2975381ddd4210ab0.jpg

Vera is having her makeup done. I felt that putting Vera on her might be a bit on the nose so I was actually considering putting Blue Sun on it, funnily enough!

2 minutes ago, Skullchewer said:

 

Far from finished.

IMG_20221024_211414329.jpgockquote widget

IMG_20221024_211405372.jpg

Edited by Skullchewer
Link to comment
Share on other sites

  • Supporters
14 hours ago, Lozart said:

 

I'm a little disappointed that the rifle doesn't say "Vera" on it anywhere.

Just to add I am sat wearing this sweatshirt...

 

BLUE-SUN-FIREFLY-INSPIRED-PEACH-FINISH-ZIP-UP-HOODED-TOP-BY-LAST-EXIT-TO-NOWHERE-NAVY-5-_DJs7XZo.thumb.jpg.b7e1f11149eb29e2975381ddd4210ab0.jpg

 

You sit down at this table and place that bet, you best be sure you bring the scrip to be raised.

 

image.thumb.png.6755c1c60d3162334eccfcbe0b30ac93.png

Link to comment
Share on other sites

  • Moderators

Vera ?......... Blue sun ?........ Not got a clue wot you kids are on about ? 🤔

Link to comment
Share on other sites

  • Supporters
6 minutes ago, Tackle said:

Vera ?......... Blue sun ?........ Not got a clue wot you kids are on about ? 🤔

 

Just some Space Trek thing that ran for 11 seasons in the 1990s.

 

 

2 hours ago, Skullchewer said:

Gorram it, if I had time I would totally rethink my Halloween game day outfit!

 

The tightest of tight pants?

Link to comment
Share on other sites

12 hours ago, Rogerborg said:

 

You sit down at this table and place that bet, you best be sure you bring the scrip to be raised.

 

image.thumb.png.6755c1c60d3162334eccfcbe0b30ac93.png

You better tell me wear you got that or I swear by my pretty little bonnet I will end you

Link to comment
Share on other sites

  • Supporters
3 hours ago, PopRocket123 said:

You better tell me wear you got that

 

Mrs Borg knitted the bonnet. The patch was eBayed and cap-riveted onto my regular summer riding jacket for peak used-future aesthetics - the colours match up pretty well.

Link to comment
Share on other sites

My purchase of the famous Austrians Plate Carrier presented me with a slight problem. MK5 Thunderflash don’t easily fit in the fancy laser cut MOLLE (although Mk4 Osprey pouches fit like a glove!!) so I had to come up with a solution.

 

I jumped into Fusion 360 and designed a holder for 4 thunder flashes and can be Velcro attached to where ever there is spare Velcro on the PC. 3D printed in black and then tensioned with shock cord. Very pleased with my invention (although I did get the original idea from a post on this very forum, sorry can’t find the original poster, thanks for the idea anyway).

67C4CAAE-E1BB-464A-9A49-AE48002D425D.png

2D31A590-E877-4614-B3ED-59A784AB7FDF.png

43921AF7-4CF4-4301-8AF9-27A294C8C324.jpeg

0A8CBBA7-8243-4144-8E20-01A8132D5EA7.jpeg

Link to comment
Share on other sites

I can’t stop making stuff!!!

 

My first ever Airsoft rifle was a second hand G36 which came with an underslung grande launcher and 4 40mm Grenades (the sort that shoot a load of BBs and a rubber bung). This has been sat in a cupboard for years so I decided to try to make use of it. As I don’t use the G36 anymore, I wanted to make it stand alone.

 

I stripped the hand guard off the launcher and designed a top to it that will hold the now detached aiming thingy (what ever they are called). 3d printed it out and now I have a grenade launcher that looks similar to a M320 minus the stock and fore grip.

 

 

B950B9A1-BC31-417A-B34C-7EA7CD45B58E.png

CCD9B9B7-A952-4585-8A50-DC902EBD4AFD.jpeg

EDA29D7D-B894-4A50-BDFD-8675FD14240C.jpeg

AC02D096-A963-4270-A978-9D2BE0766C55.jpeg

B3BA2B96-222D-467F-B896-1153541D9257.jpeg

86A2E188-E3F5-448E-B2DF-2C2B0856C761.jpeg

4492962B-BD13-4869-AF1F-D8D4F06BF450.jpeg

Link to comment
Share on other sites

My Cyma M052, modified to fit tag shells, and now given a facelift.

The paint job has been on it since just after I bought it. Last week I made a wood grip from scratch.

ConsideringI've not done woodwork since school in pretty pleased with how it's turned out.

 

Link to comment
Share on other sites

On 01/11/2022 at 17:26, Skullchewer said:

My Cyma M052, modified to fit tag shells

 

Out of interest what did you need to modify to get it to fire tag shells? 

Link to comment
Share on other sites

12 minutes ago, SheriffHD said:

Out of interest what did you need to modify to get it to fire tag shells? 

A file or a Dremel. That's all.

Inside the main chamber there's a lip. This lip prevents moscarts from falling out of the barrel.

If you file down the lip tag shells will fit in nice and snug. Of course this means that if you try and use moscarts again they may fall out, so useless for them. 

Make sure you grind it off evenly, so the tag shell sits centralised in the chamber.

Been using it for about a year with this modification and it works perfectly.

Link to comment
Share on other sites

13 hours ago, Skullchewer said:

A file or a Dremel. That's all.

Inside the main chamber there's a lip. This lip prevents moscarts from falling out of the barrel.

If you file down the lip tag shells will fit in nice and snug. Of course this means that if you try and use moscarts again they may fall out, so useless for them. 

Make sure you grind it off evenly, so the tag shell sits centralised in the chamber.

Been using it for about a year with this modification and it works perfectly.

Hmm seems odd, only ask as I got an m052 last year and I've been shooting tags from it fine without any issues and didn't need to modify anything. Wounder if there was a change in design since.

Link to comment
Share on other sites

30 minutes ago, SheriffHD said:

Hmm seems odd, only ask as I got an m052 last year and I've been shooting tags from it fine without any issues and didn't need to modify anything. Wounder if there was a change in design since.

Must have been. My friend just bought one and I had to file his too.

Maybe they changed it as they realised people want to use tags in them.

Link to comment
Share on other sites

  • 2 weeks later...
1 hour ago, Skullchewer said:

So, as can be seen in THIS POST, I bought a crappy cheap mandible for my helmet.

It did not go well.

However, I was able to salvage the arms that attached the mandible to the helmet rail, and I had an old mask that I've never used knocking around.

Some measuring, fiberglass paste, sanding, more measuring, drilling and finally painting.....

 

IMG_20221111_154407629.jpg

IMG_20221112_121453435.jpg

IMG_20221112_121501909.jpg

IMG_20221112_121512759.jpg

IMG_20221112_122116709.jpg

IMG_20221112_122122729.jpg

IMG_20221112_122130030.jpg

Solid work there matey. Great job!

Link to comment
Share on other sites

  • Moderators
2 hours ago, Skullchewer said:

So, as can be seen in THIS POST, I bought a crappy cheap mandible for my helmet.

It did not go well.

However, I was able to salvage the arms that attached the mandible to the helmet rail, and I had an old mask that I've never used knocking around.

Some measuring, fiberglass paste, sanding, more measuring, drilling and finally painting.....

 

IMG_20221111_154407629.jpg

IMG_20221112_121453435.jpg

IMG_20221112_121501909.jpg

IMG_20221112_121512759.jpg

IMG_20221112_122116709.jpg

IMG_20221112_122122729.jpg

IMG_20221112_122130030.jpg

Great work mate, I bet you look like Predator with your dreads hanging out the back. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...