Popular Post HuttArmouries Posted February 26, 2022 Popular Post Share Posted February 26, 2022 Took a 60rd scorpion midcap and cut it down to look like a 10rd one so i can properly holster it. Cut and glued the internals back together and it holds 20bbs and feeds flawlessly. Druid799, BigStew, TheFull9 and 5 others 4 4 Link to comment Share on other sites More sharing options...
HuttArmouries Posted February 27, 2022 Share Posted February 27, 2022 Since im on a bit of a mag making spree here is another. 42rd aug mag for my hbar (wip) two mags epoxied together with steel reenforcement. Needs some cleaning up and finishing but it feeds. New pin at the top as the top internal chunk is now separate from the bottom. It is a high cap as I intend to use this as an lmg. Might make midcap ones down the road. Druid799, Tactical Pith Helmet and PopRocket123 2 1 Link to comment Share on other sites More sharing options...
loctez Posted March 2, 2022 Share Posted March 2, 2022 Simple bit of spare velcro to expand the chi-com. Just needs 10 years of being dragged through the woods to look the part. Druid799 and TheFull9 2 Link to comment Share on other sites More sharing options...
goon1001 Posted March 3, 2022 Share Posted March 3, 2022 Fixing a mates m500 shotgun, the rack arm had broken. Made a new one out if carbon fibre sheet. Pleased with the results and works a1. PopRocket123, GearTech, Enid_Puceflange and 1 other 2 1 1 Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted March 3, 2022 Supporters Share Posted March 3, 2022 On 02/03/2022 at 07:50, loctez said: Simple bit of spare velcro to expand the chi-com. Just needs 10 years of being dragged through the woods to look the part. Is the Velcro stitched or the sticky backed stuff ? If it’s the sticky then be aware when your playing the heat from your body will loosen the adhesive bond on to the fabric and I’m afraid it will come adrift . Tackle 1 Link to comment Share on other sites More sharing options...
MAX DICKER Posted March 3, 2022 Share Posted March 3, 2022 (edited) Not so much made, but hacked away at until it fit... a rs Stike industries dust cover, took some trimming but now it operates as it should. Looks a bit rough but it's hardly a bank busting item so now I know it's doable, I'll get another and do a tidy job Edited March 3, 2022 by MAX DICKER Can't spell Link to comment Share on other sites More sharing options...
Guest Posted March 3, 2022 Share Posted March 3, 2022 Modified my clone Unity G43 mount so that it takes the Vortex 3xMagnifier, a much better looking piece of kit Link to comment Share on other sites More sharing options...
MagpieTactical Posted March 4, 2022 Share Posted March 4, 2022 9 hours ago, rocketdogbert said: Modified my clone Unity G43 mount so that it takes the Vortex 3xMagnifier, a much better looking piece of kit Nice indeed. Much modification needed? Link to comment Share on other sites More sharing options...
Guest Posted March 4, 2022 Share Posted March 4, 2022 2 hours ago, MagpieTactical said: Nice indeed. Much modification needed? no, mount holes line up, had to Dremel out some space for the Vortex as the turret protection ramps get in the way, the G43 doesn’t have them Link to comment Share on other sites More sharing options...
MAX DICKER Posted March 4, 2022 Share Posted March 4, 2022 Wall mount in my den for my MWS Skullchewer, SgtTalbert, PopRocket123 and 1 other 4 Link to comment Share on other sites More sharing options...
Skullchewer Posted March 5, 2022 Share Posted March 5, 2022 (edited) So, one army surplus belt and yoke harness, an unwanted ghillie poncho, pinking shears, the trusty old hot glue gun and.... Edited March 5, 2022 by Skullchewer Druid799 1 Link to comment Share on other sites More sharing options...
Supporters Popular Post Druid799 Posted March 5, 2022 Supporters Popular Post Share Posted March 5, 2022 Twins separated at birth FINALLY reunited ! 🤣🤣🤣👍 Skullchewer, Tackle, Pappa Large and 3 others 6 Link to comment Share on other sites More sharing options...
Skullchewer Posted March 5, 2022 Share Posted March 5, 2022 12 minutes ago, Druid799 said: Twins separated at birth FINALLY reunited ! 🤣🤣🤣👍 MY BRAIN HURTS! Druid799 and Tactical Pith Helmet 2 Link to comment Share on other sites More sharing options...
Skullchewer Posted March 7, 2022 Share Posted March 7, 2022 (edited) Some more mockery incoming, no doubt 😉 My mate does 3D modelling, he designed a skull image to go with the username Skullchewer, which I have been using for online gaming, Airsoft etc for... over 20 years. He designed it with my hair and scalp tattoo. I added some text to it, and am having a custom patch printed for my loadout. Edited March 7, 2022 by Skullchewer Druid799, PopRocket123, MAX DICKER and 1 other 1 3 Link to comment Share on other sites More sharing options...
PopRocket123 Posted March 7, 2022 Share Posted March 7, 2022 Haven't made anything yet but my work got one of the best resin printers you can get last week. Being the only one trained to use it they're letting me use of for my own stuff so I should be able to make the toughest and highest quality airsoft prints available. Druid799, Skullchewer, MAX DICKER and 1 other 1 3 Link to comment Share on other sites More sharing options...
Skullchewer Posted March 7, 2022 Share Posted March 7, 2022 @PopRocket123 bayonet attachment dildo. Druid799 and MAX DICKER 2 Link to comment Share on other sites More sharing options...
loctez Posted March 8, 2022 Share Posted March 8, 2022 On 03/03/2022 at 11:40, Druid799 said: Is the Velcro stitched or the sticky backed stuff ? If it’s the sticky then be aware when your playing the heat from your body will loosen the adhesive bond on to the fabric and I’m afraid it will come adrift . Couple of staples and mostly super glue, should be enough. Tackle 1 Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted March 8, 2022 Supporters Share Posted March 8, 2022 55 minutes ago, loctez said: Couple of staples and mostly super glue, should be enough. Been making kit for 20yrs so can guarantee it’ll fail I’m afraid . Any load bearing connections that aren’t either stitched or riveted together on fabric will separate sooner or later , keep an eye on it and check regularly or you will leave the safezone with a dangler pouch one day AND comeback without it ! 🤬👍 Tackle 1 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted March 8, 2022 Moderators Share Posted March 8, 2022 1 hour ago, loctez said: Couple of staples and mostly super glue, should be enough. Sounds fine to me 😏 MAX DICKER, Skullchewer and Druid799 3 Link to comment Share on other sites More sharing options...
Speedbird_666 Posted March 10, 2022 Share Posted March 10, 2022 Gotta love ICS and their 'not-quite-TM' standards. Not even a 'normal' AEG trigger guard will fit an ICS CS4-spec gun. Oh well, I'll design my own - kinda HK416A5 style. It also fills that pesky gap between the grip and receiver so it's much more comfortable, PopRocket123 and TheFull9 2 Link to comment Share on other sites More sharing options...
Stratton Oakmont Posted March 10, 2022 Share Posted March 10, 2022 12 minutes ago, Speedbird_666 said: Gotta love ICS and their 'not-quite-TM' standards. Not even a 'normal' AEG trigger guard will fit an ICS CS4-spec gun. Oh well, I'll design my own - kinda HK416A5 style. It also fills that pesky gap between the grip and receiver so it's much more comfortable, Have you made an mws one? Link to comment Share on other sites More sharing options...
Speedbird_666 Posted March 10, 2022 Share Posted March 10, 2022 40 minutes ago, Stratton Oakmont said: Have you made an mws one? Nope - I don't have an MWS - I only own budget blasters. 😉 Looks like a 'proper' HK416A5 style guard would be a fairly easy design/print though. Link to comment Share on other sites More sharing options...
Stratton Oakmont Posted March 10, 2022 Share Posted March 10, 2022 If you can make a drop in version that requires no bodging unlike most others on the market , fills the gap between the trigger guard and the grip may be of interest to mws owners Link to comment Share on other sites More sharing options...
Speedbird_666 Posted March 10, 2022 Share Posted March 10, 2022 1 hour ago, Stratton Oakmont said: If you can make a drop in version that requires no bodging unlike most others on the market , fills the gap between the trigger guard and the grip may be of interest to mws owners I would need an MWS trigger guard to take measurements - I'm assuming they are not the same as AEGs (narrower?) Knocked up a version that's closer in appearance to the HK A5 Type, but using ICS hole spacing/vertical thickness for now. Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted March 11, 2022 Supporters Share Posted March 11, 2022 On 07/03/2022 at 21:36, Skullchewer said: Some more mockery incoming, no doubt 😉 My mate does 3D modelling, he designed a skull image to go with the username Skullchewer, which I have been using for online gaming, Airsoft etc for... over 20 years. He designed it with my hair and scalp tattoo. I added some text to it, and am having a custom patch printed for my loadout. You want to tell him if he can do these for an affordable price he could make an absolute mint out of us geardo’s wanting bespoke patches . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now