Supporters sp00n Posted July 5, 2016 Author Supporters Share Posted July 5, 2016 What rail covers are these? There d-boy RIS armour mate Sacarathe 1 Link to comment Share on other sites More sharing options...
Mr Monkey Nuts Posted July 20, 2016 Share Posted July 20, 2016 RMR rear sight adapter for TM/KJ Works G17/19/23/32 Is this file "out there"? i cant seem to find it anywhere? Link to comment Share on other sites More sharing options...
J_simpson Posted July 21, 2016 Share Posted July 21, 2016 Some of my my makings for the airsoft theme. When You are modeling UK army forces, and living 1500 miles from UK 3d printer became useful thing) Docter mount for AcogBack pin for l85a1\a2 Now in progress; mount for ACOG to l85 L119a1 barrel. Albiscuit and Samurai 2 Link to comment Share on other sites More sharing options...
mightyjebus Posted August 15, 2016 Share Posted August 15, 2016 Is this file "out there"? i cant seem to find it anywhere? not yet as I'm not happy with the design. I downloaded this one and printed it off. It's not my model and thanks to the original creator. TM Breacher with 3D choke And now for something completely different: Link to comment Share on other sites More sharing options...
Supporters sp00n Posted August 15, 2016 Author Supporters Share Posted August 15, 2016 probably my most decorative flash hider Druid799, Samurai, proffrink and 1 other 4 Link to comment Share on other sites More sharing options...
Sacarathe Posted August 15, 2016 Share Posted August 15, 2016 probably my most decorative flash hider Is there a version with the whole head for a smaller gun? Link to comment Share on other sites More sharing options...
mightyjebus Posted September 18, 2016 Share Posted September 18, 2016 sadly not airsoft but it is a gun..... Rey's blaster from Star Wars The Force Awakens. Samurai 1 Link to comment Share on other sites More sharing options...
mightyjebus Posted September 20, 2016 Share Posted September 20, 2016 since some people liked the last one... Sacarathe, GothicGhost, Samurai and 1 other 4 Link to comment Share on other sites More sharing options...
Supporters Samurai Posted October 5, 2016 Supporters Share Posted October 5, 2016 Designed and printed a TDC. Download it if you want: http://www.thingiverse.com/thing:1808598 Monty 1 Link to comment Share on other sites More sharing options...
DesireHD Posted October 5, 2016 Share Posted October 5, 2016 Hey pal I am loving that dinosaur at the end of the flash hider. Can you do these in different sizes? I have just bought a cm16 wild hog and it has a noise amplifier but would love one of these to over it. Can you inbox me so we could talk more about possibly buying one. Thanks. Samurai 1 Link to comment Share on other sites More sharing options...
Supporters sp00n Posted October 12, 2016 Author Supporters Share Posted October 12, 2016 Designed and printed a TDC. Download it if you want: http://www.thingiverse.com/thing:1808598 snap! been waiting for shapways to deliver my version in metal (on the left, been waiting since the 14th!), quick print i did on the right proffrink and Samurai 2 Link to comment Share on other sites More sharing options...
Supporters Samurai Posted October 13, 2016 Supporters Share Posted October 13, 2016 ... been waiting for shapways to deliver my version in metal (on the left, been waiting since the 14th!), quick print i did on the right I don't get it how it works. The nut seems to be glued in and the bottom part doesn't have a nut. So it seems somehow there is a threaded rod that can move up and down but can't turn. Link to comment Share on other sites More sharing options...
Supporters sp00n Posted October 13, 2016 Author Supporters Share Posted October 13, 2016 I don't get it how it works. The nut seems to be glued in and the bottom part doesn't have a nut. So it seems somehow there is a threaded rod that can move up and down but can't turn. It's so I can adjust the AA hop unit in my vsr, without having to eject the mag. Basically I have turned down a 3mm cap head, so it fits where the original AA hop adjuster bolt sat, but it's going to extend through a hole in the outer barrel then into the above pic's thumb wheel, with a 3mm locking nut on top to secure it all in place. That's the plan any way Samurai 1 Link to comment Share on other sites More sharing options...
Supporters Samurai Posted October 14, 2016 Supporters Share Posted October 14, 2016 A fellow forum member was in need. Ajax and L3wisD 2 Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted October 21, 2016 Mostly Retired Moderators Share Posted October 21, 2016 Said forum member in need here, well chuffed with these! Just hope I don't lose them as fast as the originals! Definitely recommend Samurai's printing skills! Samurai 1 Link to comment Share on other sites More sharing options...
SgtTalbert Posted October 21, 2016 Share Posted October 21, 2016 Said forum member in need here, well chuffed with these! Just hope I don't lose them as fast as the originals! Definitely recommend Samurai's printing skills! Reddit Famous Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted October 21, 2016 Mostly Retired Moderators Share Posted October 21, 2016 Aye! Reddit fame at last! The fit is spot on too. Very happy. Samurai 1 Link to comment Share on other sites More sharing options...
Popular Post mightyjebus Posted October 26, 2016 Popular Post Share Posted October 26, 2016 prototype shell holder for TM KSG Shotgun Albiscuit, Elts7, MasterGouken and 2 others 5 Link to comment Share on other sites More sharing options...
Sico Posted October 26, 2016 Share Posted October 26, 2016 Aye! Reddit fame at last! The fit is spot on too. Very happy. What's that ? Link to comment Share on other sites More sharing options...
Albiscuit Posted October 26, 2016 Share Posted October 26, 2016 What's that ? The bit which fits in the back of a M4 stock to hide/hold the nunchuch batteries in place. I seem to have found one on the floor at every single safe zone I have visited Samurai 1 Link to comment Share on other sites More sharing options...
mightyjebus Posted October 27, 2016 Share Posted October 27, 2016 I went for this design in the end and it works well. Anyone who wants one can download it free from here (not before tomorrow afternoon due to thingiverse rules). You will need two M3 screws about 15mm long. http://www.thingiverse.com/thing:1853252 If there is any interest I'll make a 2 and 4 shell version. Albiscuit and Samurai 2 Link to comment Share on other sites More sharing options...
Elts7 Posted October 27, 2016 Share Posted October 27, 2016 Where can i get a 3d printer? Whats running costs like? Link to comment Share on other sites More sharing options...
Guest PT247 Posted October 27, 2016 Share Posted October 27, 2016 Where can i get a 3d printer? Whats running costs like? https://www.google.co.uk/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=3d%20printer%20uk Link to comment Share on other sites More sharing options...
mightyjebus Posted October 27, 2016 Share Posted October 27, 2016 I use this one: LINKY a roll of filament will cost around a tenner and will make 1 kg worth of 3d models. from a roll I'd probbaly be able to make 10 or 12 of the shotgun holders Link to comment Share on other sites More sharing options...
Elts7 Posted October 27, 2016 Share Posted October 27, 2016 oh interesting, i thought they were alot more, are they complicated to program or is it made via CAD software? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now