GothicGhost

Kinda bought one of these.....   Action Army AAP-01 in black, as well as also ordering a set of rail mounts to fit a red dot sight.
 
Can only share stock pictures at the moment as my pistol is on preorder as part of second batch due for release next month.

Yes I am in the middle of making something - in a over complicated way probably 🤪 (will post when I’m done but I got side tracked with two recent deliveries 
Scope images straight out of the box and nothing set - first is from iPhone at normal and down the scope at x3 mag - too much hand shake at x3 even worse at x9 so didn’t bother after a few failed attempts, chimney is about 150 metres away (guess-ti-mate)

\Ordered a Magpul CTR stock for my TM MWS Block II FSP build, but instead I got a MOE, decided to keep it anyways and called in for a refund of the difference in price, which is quite substantial, next to that I got my GHK AKM deliverd aswell ❤️
 

Cheap IPSC belt that pretty good for £12
 

Things i've purchased over the last few weeks of COVID19 lockdown.
Replica CIRAS Woodland plate carrier & mag pouches etc..
Travail 4.5kg training plates
Tru-Spec M81 combat top (All the way from America)
One-Tigris warbelt + bits & bobs added to it.  (I already have a Multicam WARRIOR belt as well)
Amazon special Red dot sight (for my Vortex Strike Eagle)  **Just gotta cure the mag problem with the ICS (Won't feed bb's from full mags)
+ BOLT M16A4 with replica ACOG + Bayonet for giggles..
 
 

New holster for my hi-capa.
 


 

Few recent bits I've been waiting on finally arrived today:
 
Zenitco dual pressure switch for the Klesch-2 & Perst-4 , again great quality & a nice little bit of kit allowing me to control / adjust the attachments as opposed to 2x separate switch attachments
 
Additional MK46 Box Mag & Dummy bullet belt
 
Tag Pecker MK2's - Dummy Tag grenades so I can get some practice without (literally) blowing up £7 a shot! - Helps in orange as well so I won't lose them!

Picked up a very sensibly priced Vortex Strike Eagle 1-6 x24 from a member on here
 
Does the job very nicely, added a couple of the lens protectors as well
 
Daytime set up for the MK46 now complete

First gun and bits and bobs arrived - I had asked in another thread which pistol to buy and understand this was probably asked quite a few times in the past however thank you to @Heath @heroshark @Davegolf @Dentonboy @Nick G @Zarrin @BigStew for your helpful replies - @rocketdogbert mentioned at the beginning of the thread that the TM FNX-45 was the best out of the box pistol available at the moment and that’s what I got - My gun model is Mazie😜

Wanted one for ages...sold a load of unused bits to fund it, but, well...
 

My new Specna Arms SA-H20 😍
 
Can't wait for Covid to fuck off and actuallly use this on people.
Gives me enough time to experiment with the Gate Aster's pre-cocking and trigger sensitivity etc
 
 
 

My New Toys TM GBBR M4 and a Maruzen P99 GBB

Direct Action dump pouch......
 
Fast shipping from Poland and a feature I really like. Due to the design it can have other pouches inside its molle mounting.
 
So yeah.... a folding dump pouch that doesn't hog up space. Also the personally signed thanks for buying our kit card is nice as well.

Got a package this morning.

Visionking short dot and repro geissele mount for the DMR 
 
 

The M249 needs some TLC so I have given myself a project to do over the Christmas Break. We have:
 
Bullgear CNC Hop Up
ZCI 6.02 tight bore barrel
Prometheus Purple Bucking
Prometheus Flat Hop Nub
Gate Nano ASR MOSFET 
High Speed Gears
Nuprol High Torque Motor
gearbox bushings
Aluminium Piston and Piston head
Aluminium Cylinder head 
Sorbothane piston pad
5.56mm Dummy Rounds
 
I am looking to increase the ROF and also
make it more reliable as it has been a pain in the ass up until now.
 
I also treated the new MWS John Wick build to some keymod Rail sections and a Magpul clone sling mount. And finally I managed to get a boonie that actually fits my unfeasibly large nogin.
 

Just got my UKARA License... VERY EXCITING
 
Ordered myself a 
 
Specna Arms SA-C12 CORE (PatrolBase) 

ICS BLE XAE (TaiwanGun)
 
9.6v 1600mah battery and charger (vapex)
2 x Hi Cap M4 Mags
Spare Pistol Gas Mag
Green Gas
G17 Holster
0.25 ASG Blaster BB's
A couple of speed loaders
A Gas Mag Value Tool
Silicone Oil & Silicone Grease
 
Bring on the new year...!! I think I'll be all set!!
 
Cheers
 
Frank
 

Been awhile since I brought anything Airsoft related but splurged out on two new GBBR platforms.
 
I know they are both SBRs but after years of lugging round my Krytac LVOA C, I fancied something smaller. 
 
GHK MK18,
(The T1, Peq and torch come from my LVOA.)
 

 

 

And, a Umarex VFC HK416a5.
 
In RAL 8000. And a Specter To go with it. And Peq and Inforce light set up.
 

 

 
 

Mmmmm excitement at home!
 
Thanks for people's AK insights, so chuffed with this build wise, the finish and fit really is lovely, nice that even the little bits are machines not cast from pot metal! Also maintenance guide and the tools to do it included!
 
 
 
 

Zenitco B30 and B31C from Ivan Tactical.
 
Not as much modification as I'd have thought to fit them, still not quite perfect but no wobble!

Got this in the post. CYMA cm.702c.
 
Looks ok so far. Shooting about 500fps with 0.2 bbs with the hop half on. Will give it  proper test at the weekend. Will need to buy a scope, bipod and other bits. Will probably need a new hop unit and other internals. 
 
I will also give it a paint job at some point too and will put some pics up when done.

The tm finally turned up woohoo
And I've just bagged myself a nice Ares am-014 and also awaiting an Arcturus ar15 lite cqb.

I've played in a suit before, but never gave it much thought. 
A mate suggested a payday theme as he bought the official vinyl masks, so we modified them into airsoft masks, (and tested them)
Lined the inside of the jackets with velcro, added some pouches, and it was the most comfortable days airsoft I've had in ages. 
Just carry 4 mid caps, a bfg each and some spare 209s in a tic tac box. 
45 quid for a suit from matalan, can't remember what he paid for the masks, and some pouches nicked off an old chest rig. 
 
 

Hey guys! 
 
after speaking to the bank for what felt like 2 hours.. I have finally got my money back told them everything the address his family the box he sent a picture of, the rug he used to take the pictures.. everything. They put the money in in seconds. On another not as well I said paid threw f&f but in fact it came straight out of my account so I think I got a bit lucky 🍀.. they handled it perfectly. The guy Tom who delt with the call couldn’t of been nicer about things really couldn’t. The police phoned me this morning regarding the issue and I still want to take things further.. he still has the other buyers money Stephen Joyce as he paid threw f&f I’m not letting him scam another bloke who is looking for something again. Named and shamed! I’m going to phone all the sites he goes to to get him banned. Until Stephen gets his money back it’s not over yet.  
 
Also I just want to say a massive thank you to the people who helped me deal with this.. salt of the earth kind of people. I really do appreciate all the looking up, the searches everything. I felt so alone and didn’t have a clue what to do.. but use guys made it right. I’m really grateful for that.  If anyone is around the Edinburgh area in the next couple of weeks for a game of Airsoft at my local I would love that 👌 
 
cheers again 
 
Craig 

Nearly finished, we gbbr m4 base, upgraded nozzle, recoil spring, barrel and bucking. Exterrnaly clone geiselle mk4 rail, mlok for grip, pts pistol grip and trigger guard, slim pdw stock, t1 on high rise, rmr on 45 degree angle and m620v torch. Still got to change the muzzle.