rj1986
-
Posts
551 -
Joined
-
Last visited
-
Days Won
2 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Posts posted by rj1986
-
-
From memory the TM M4 is different to ta GBB.
The AEG goes:- Body
- Barrel
- Screw Barrel Nut
- Spring
- Retaining collar
And also has 2 screws to hold the outer barrel in place
-
-
-
WA SVI
in Appraisals
Found this down the back of the cupboard, forgot I even had it.
3 mags total, all still has tight. Shoots well. Locks back as expected.
No box.
About 6.5/10 condition. Some scratches but no major chips or chunks missing
-
I would say around 600-650
gun: 525
mags: 50 ea
825 x 0.7= 577.5
plus case and postage
edit: that’s assuming it’s all as good as new and unfiddled
-
HPA oerlikon?
-
2 hours ago, Pupa2794 said:
But you can't get on a lot of Japanese websites any more due to law changes.
Liz truss devalued the pound and made buying from Japan a lot more expensive.
And a flight to osaka, (it's something I'm really wanting to do) to buy 4 tm mags is not really within everyone's grasp.
I bought one of the first TM AKMs that arrived in the UK and was stuck with a genuinely good gun that I couldn't get mags for without losing a kidney. One retailer was asking, and getting, 100 quid per mag.
thats what im saying - there are mags, just not in the same vicinity as us.
-
11 hours ago, Impulse said:
Shame TM will screw it up and there won't be any mags in stock for years (like the AKM).
But I will say I do really like the look of this. I think I'd want a drum mag though.
Theres always mags, you just need to know where to look.
I picked up 4 TM mp5 mags in Osaka in March just walking into a shop. There's so many shops that stock TM stuff IN Japan, that finding things is easy. And as it's easy in Japan, this equates to TM going, "It's OK"
-
2 hours ago, RostokMcSpoons said:
The black DE is less ugly than the tan one, partly because of the longer barrel, but it still doesn't float my boat
Once you slap on a ton of extra weighty not very useful for airsoft accessories, they look a quite tasty. Longer suppressor also helps balance the looks i think.
-
Its a Maxim Defense PDX
https://www.maximdefense.com/product/urban-grey/
With the black one being MDX
https://www.maximdefense.com/product/mdx508-c/
New bits of gucci kit as its an AR platform that fires 5.56, 300BLK and commie 7.62
-
There's a boot sale next weekend - i figure without a bolt carrier bodypart, and with the mag and stuff £400?
Going rate seems to be £500 for lightly used with 1 mag, so that seems fair?
-
photo wise, its just a Vanilla TM mk18 with the usual light use scratches.
Bolt - it's an AG bolt, and the 2 screws holding the nozzle guide are basically welded in with theadlock, so i can't get the nozzle out to change the buffer.
My choices are:
- Swap out the bolt with my other MWS which is a standard with NPAS
- Swap out the bolt body so its a TM bolt with AG nozzle, and rebuild my other bolt with parts i choose (probably the most favoured option)
- Buy a 2nd hand complete bolt
-
So the bolt is a wee bit fucked. So would it be better to put another 50-100 in making it right, or breaking for parts?
-
3 hours ago, JimFromHorsham said:
If it’s tiny screws that may strip & it’s loctite just try holding the tip of a soldering iron in the screw head for a minute , the heat will often soften the loctite without damaging anything else .i'll give it a try, nothing to lose
Edit: An hour in and still no luck. I've basically cut off the bolt carrier key to try and get at the screws better, but still not budging
2nd edit: yeah, nah, its fucked
-
On 05/11/2019 at 23:15, Yukarin said:
Ran the AngryGun nozzle again last sunday, zero issues with it now as I replaced the sealing buffer with the stock TM one. The AG sealing buffer is too wide and causes friction which can cause mid-cycle jams.
so box of goodies i ordered from Fire support turn up to try and cure a similar problem. Go to disassemble to bolt and the 2 screws on the top are solid. Like proper solid. So now seeing if the penetrating fluid will help - if not, have to break out the tools and buy some new screws .
When a 5 minute job turns into a 4 day one...
-
Why does Elton John always play piano?
Because he sucks on an organ
-
Unlimited money - I would buy the IP and R&D of the BO Dynamics Phantom and make it a viable product
-
So fiddling and cleaning gbbr’s and I’m trying to fill mags.
In the MWS chat there chat about filling and gas pressures.
But I have come across something that someone might be able to find useful.
nuprol 2.0 - fills
blue gas - does not fill the mags
yellow gas - works like a charm
same goes for WE ACR mags. I still have various TM and WE pistols to try.
Anyone who knows more about that have any ideas what all that means.
-
On 19/04/2023 at 10:04, Emergencychimps said:
This seems to be common with v3 mags, I have v3 mags and have had a similar issue.
My "work around" has been to use ultra air gas and abbey. Nuprol has been hit and miss and using propane was a complete waste.
My suspicions are around the nozzle on the gas not fitting into the valve quite right, rather than the gas itself. Add onto that I'm a gbbr noob and I didn't want to mess with it over cold games, so just getting it back into action.
I'm experiencing the same.
Nuprol green, fills in about 8 seconds and fires lovely.
Propane adapter, I get about 3 shots worth.
On another note, I've got a mk18 that i got in a bundle deal I've noticed the nozzle seems to be dragging on the bolt. The spring seems snappy as it starts its journey back perfectly, but then i hear it rubbing, almost like air is escaping from it.
Edit, on closer inspection it looks like an AG drop in set, so not sure why its rubbing. I think that when it gets low gas/cold, the bolt cycles but the nozzle doesn't. So maybe a 170% spring is needed?
Edit 2: Post on pg90 says the AG buffer is too big and drags, so maybe that first?
-
Probably going to sell one of the MWS's as its now surplus to requirements
As i got it lightly used, I'm trying to remember the internal build, but I will assume its stock apart from the bits i can see.
- MWS Mk18 VGC, light scratches around the rear stock tube collar, 2 mags total
- NPAS
- RS AR15 Buffer spring
- AG heavy weight buffer + original
- AG (?) rear sling plate
- MP22 wrench for when you need to do a hop rubber change
- Spare nozzle spring set as the current one is on this side of usable but a wee bit sluggish
-
I got my car keys stolen when i was 17 (luckily they didn't steal the car).
My dad shouted at me, but basically taught me to ask "Would I leave my wallet there?" If the answer is no, then don't leave anything valuable there.
-
On facebook, he said it was stolen out the back of his car.
From the rear footwell. Without a case.
-
- Popular Post
- Popular Post
The other week i slipped sideways on some wet leaves onto concrete.
Instinctively I took the fall with my shoulder due to
a) many many years of playing rugby, I knew my shoulder could take the fall
b) i had my shiny new mk46, and i would rather break my shoulder than that
-
Compact revolver
in General Discussion
Posted
I'm gonna save this and show my wife that 2.5 inches is still a large frame