Leaderboard

KWA qrf mod 1....... With tracer unit and double mag clip. Bit of a overkill with the holo and magnifier....thoughts ?

Report to admins newest user @scottmiller going through wanted ads getting people to email “Matt” to be scammed. Had this one a couple times already on the same wanted ad.

Wow. That would set me back a new set of eye pro for pretty much every time I play - I'm not sure my finances can extend to that! I would like to think that any eye pro that is materially weakened by a hit or two shouldn't be on my face in the first place.

Was pretty hesitant on using AliEx for a while, but the one thing I've been needing to add to my whole gun collection is more/better optics as I'd had the same couple of red dots/scopes for years and would swap them between guns, but that was getting tiresome and they were all pretty long in the tooth anyway. After spending a while learning to navigate the weird way that shops on said site are laid out and (mostly) getting to grips with what product is actually what (because there's loads of store fronts all advertising the same physical products but at slightly different prices), I placed a few orders while on a nice little 4-month excursion work sent me on. Picked up clones of the Leupold HAMR and LCO (D-EVO still incoming), latest Spuhr mount, Elcan Spectre 1x/4x, Vortex Razor 1-6 w/Geissele mount, ACOG TA-02 and an Aimpoint 3x magnifier. Plus the below EoTech and other Vortex bits. Also swung by Negative Airsoft today, he'd done some work on my Scorpion Evo, my old CA M15 and I'd commissioned a borderline scratch-build M4A1 AEG. Technically it started as a CYMA Daniel Defense Mk18, but I think the GB casing, buffer tube and a few other small gearbox internals and tiny screws are all that's left of the original gun. Long story as to why, but there were many reasons rest assured. I still 'need' to change the OB, handguard, pistol grip and stock (and maybe other little things down the line) to my own parts to make this my ideal early-2000s America's Army M4A1 but that stuff I can easily do myself. Whereas I don't have the skill, desire or parts inventory to work on AEG guts and the gun is already sounding/shooting absolutely tip-top.

Never have i joined a forum and felt so at home so quickly. I mean.. uhh.. that's weird, dude.. ?

GBBR MWS

Half term regret sale https://www.airsoft-hub.com/item/34815-bulldog-m4 "around 4000 BB’s I’m trying to get rid off" Then use them as a deal sweeneter along with the battery, charger, extra mag and broken speedloader, which probably won't fetch a great deal more than a tenner at a used airsoft fair. Yes, you'll have to drop the price way, way below £150. Half that isn't unrealistic.

The MWS needs nothing doing to it OOB. You were probably getting jams through crap BBs. Try Geoffs - widely acknowledged as the best. GBBR needs better BBs than AEG peasants.

And now it’s gone!! Whadidisay? ??‍♂️

I’m like a coiled “Pit Viper” waiting to strike at this one depending on what it is ?

I bought some eBay fibre optic for my Glock sights years ago Absolute poop, I’ve got pubes thicker than some of it ?

Doesn't matter what shape the mag is there's always a 6mm coming out, so if it works then crack on. As a speccy-four-eyes I say stick a massive 20x scope on an MP5k if you like.

Dagger nose model. The frames are no longer available some people really liked them . The standard mesh is very solid I wouldn't worry about it.

Ordered these for more TM Desert Warrior pimpage ....

Relevant legislation and regulations cover transportation and operating fill stations etc, then add the legal issues of HSE compliance even if not a direct legislative requirement These do apply commercially and generally don’t apply to individuals. Be aware if you have a works provided vehicle, even a salary offset car etc - as then commercial transportation does apply. You ought to inform the insurer and display relevant triable/diamond warning stickers (Private vehicles are not required to display the HPA cylinder symbol to carry a playing cylinder - but as discussed with a firefighter friend they would be happier to see the sticker and be prepared than to be cutting into a crushed car and discover an unknown cylinder or cut through one) Sites are obliged to check self fill and staff fill cylinders, plus have a responsibility to keep staff and other customers safe Back in the day there were paintballers using scuba cylinders to self fill on site when either the site only ran CO2 or they were using DOT/TC cylinders with a blind eye turned. This slackness bred and bad practices spread, using unrestricted fast fill stations and youngsters self filling Everyone suddenly paid attention when a series of failures occured in the UK and Europe in rapid succession. One case was a full flash fill explosion of the regulator and cylinder with hospitalisation (luckily “only” chemical burns and “minor” melting of his jersey) the rest tended to be burst disk failures Mostly attributed to slack procedures (including 3000psi cylinders on 4500psi fill stations),dirt contamination, heat (fast fills) and the burst disks failing due to those combinations, some cases of self fitted/changed regulators not correctly fitted and/or thread damage - causing bottle rockets etc The explosion was fully investigated by HSE, it involved a specific ultralight cylinder type (of the brand “safer”) which affected their reputation but was not the cylinder design at fault - the problem was oil contamination attributed to a previous users bad maintenance contaminating the fill station and the fast fill generating heat at pressure plus oil contamination causing an explosion The relevant legislation may not apply to individuals directly but it does affect us all - not necessarily impacting on the individual with bad habits but the others around

Literally tl;dr

Just received 5x SSX23 magazines for my mk23. But why did I buy them if I already have 5 STTI magazines that work just fine? Because I hate pins, and I am moving to propane so I don't want to deal with mk23 magazine maintenance on the regular with those goddamn pins! The new Novritsch mags have screws in the baseplate instead, much like a hi-capa, 1911 or p226 mag (guess which other pistols I tend to use...)

1x set of Waldo silicone lubes (for the price of 50 ml here I got 150 ml of various viscosities) 1x CTM superlight bolt for my aap carbine. Now looking at GBB barrels....fuck....

Luminae 45deg adapter and small GP pouch Genuine Shaw Concepts Raid insert for 7.62/308 and then a fakie ali copy of their ARC carrier 3d Printed vented plates for the Warrior Recon from ebay S/hand Nov plate carrier, fitted another copy ARC to be able to swap rigs if necessary, Shown with a 556 insert they come with

Solid stock ? you devient ! ?

Do you replace yours every time you get shot? ?

TM G17 gen5 MOS W/Acro P2 Elite Series Midnight Cerakote

Do be very careful not to spill any brake fluid on that blue paint, it might spoil the finish Edit: unintentionally correct advice ???

Noooooooo

FFS why, just why!!??

This is a justbbguns special, looks like the poor kid got taken for a proper ride in store, that is the upgraded battery and bb package ?