cavninja Posted February 4, 2015 Share Posted February 4, 2015 As always Mack, looking the dogs nads!!! Gleaming mate! Mack 1 Link to comment Share on other sites More sharing options...
n1ckh Posted February 4, 2015 Share Posted February 4, 2015 Will do samurai Mine works as I use it to find out how fast my rc fast boats and cars go Link to comment Share on other sites More sharing options...
Mack Posted February 4, 2015 Share Posted February 4, 2015 I keep bidding on ebay for one and get sniped every time in the last 5 seconds ffs cavninja 1 Link to comment Share on other sites More sharing options...
cavninja Posted February 5, 2015 Share Posted February 5, 2015 Seriously tempted to buy one and a wrist cover in multicam!!! Yes! I know! ?? I'm a slave to MTP and airsoft!!! Mack 1 Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted February 8, 2015 Supporters Share Posted February 8, 2015 My hodgepodge load out and guns. In the top left I've got my FAST helmet, my old mask (new one coming soon?... I hope), Rogers Shooting School shirt, tan Army Surplus pants, and Rogers gloves. I also use the tan MOLLE pack to transport stuff, and use a tan MOLLE vest as you can see, with 2 double M4 magazine pouches and a singular P90 pouch. Ghillie suit in the top right, in its bag. W700 rifle in digital duct tape below that, as well as some green gas. G&G CM16 Raider GBB in two tone, with Safariland's Grippod attached, as well as their Superstoc. I have four magazines for it; two are mounted in a Wilson Combat dual mag holder. Next up is my ACM P90 AEG with an Aimpoint air rifle sight, Safariland single point sling that I custom installed, Safariland torch, B&T silencer/tracer unit, and a green laser sight, along with a mid cap and a high cap mag. Then I have my newest gun, my ACM MP40 AEG with only one mag. Moving over, I have my WE SIG P226 GBB with two magazines (third is on its way) and a Safariland Kydex ALS holster. Below that is my WE G17 GBB with Safariland Glock grips and a custom Tridium foresight, two normal magazines and one high cap magazine, all in a Sadarilabd Kydex ALS holster specially made by Bill Rogers, as normal Safariland holsters didn't fit the WE G17 at that time. A Safariland rail light for pistols is by those as well. In terms of ammo I use Valster BBs weighing in at .20g. I have my "Mall" container elsewhere that has a mixture of 1-5 tracer-normal pellets for realistic tracer fire as well. A portable multi-headed screwdriver set is also by the airsoft pellets. So... What do yall think? ( keep in mind I've been at this at a higher level for less than a year...) Albiscuit 1 Link to comment Share on other sites More sharing options...
Albiscuit Posted February 8, 2015 Share Posted February 8, 2015 Looking good, impressive amount of kit for a short time. Link to comment Share on other sites More sharing options...
Popular Post Sam_G Posted February 17, 2015 Popular Post Share Posted February 17, 2015 My loadout as it now stands. clothing: Vertx NYCO trouser in Kryptek Highlander Vertx Gunfighter Shirt in Kryptek Highlander 5.11 belt Oakley SI Gloves (thumb and index fingers removed) Lowa Desert boots Emerson Fast Helmet in atacs - emerson Kryptek highlander over T-Rex shooting glasses with prescription insert mesh face mask Load carrying Warrior Assault Systems DCS in OD 3 x WAS quick mag (rifle) pouches 1x WAS quick mag (pistol) pouch double 40mm pouch Was small radio pouch Warrior Assault Systems Sabre Drop leg 3x WAS quick mag (pistol) pouch 2x WAS quick mag (rifle) pouch Genuine BlackHawk Serpa Genuine backhawk Jacket duty belt attachment / clone drop leg panel Magpul rifle sling Weapons: Primary: TM CQBR recoil: rewired for lipos, fuse removed, E6 M90 Spring, Troy TRX rail, clone Aimpoint T1, Clone MBUS, AFG2, Clone M600 scout light, Blackhawk sling point sling adaptor Back up: TM SCAR-L: Fuse removed, XTM rail covers, Eotec 551, AFG2, PEQ15, Clone M600 scout light, clone rear MBUS WE XDM Compact - enchanced recoil spring. 6 x Magpul recoil Pmags with genuine magpuls TRMR imact airsoftwarrior147, JamesAirsofterAgent, Airsoft_Mr B and 3 others 6 Link to comment Share on other sites More sharing options...
Supporters Popular Post M_P Posted February 17, 2015 Supporters Popular Post Share Posted February 17, 2015 My loadout as it now stands. clothing: Vertx NYCO trouser in Kryptek Highlander Vertx Gunfighter Shirt in Kryptek Highlander 5.11 belt Oakley SI Gloves (thumb and index fingers removed) Lowa Desert boots Emerson Fast Helmet in atacs - emerson Kryptek highlander over T-Rex shooting glasses with prescription insert mesh face mask Load carrying Warrior Assault Systems DCS in OD 3 x WAS quick mag (rifle) pouches 1x WAS quick mag (pistol) pouch double 40mm pouch Was small radio pouch Warrior Assault Systems Sabre Drop leg 3x WAS quick mag (pistol) pouch 2x WAS quick mag (rifle) pouch Genuine BlackHawk Serpa Genuine backhawk Jacket duty belt attachment / clone drop leg panel Magpul rifle sling Weapons: Primary: TM CQBR recoil: rewired for lipos, fuse removed, E6 M90 Spring, Troy TRX rail, clone Aimpoint T1, Clone MBUS, AFG2, Clone M600 scout light, Blackhawk sling point sling adaptor Back up: TM SCAR-L: Fuse removed, XTM rail covers, Eotec 551, AFG2, PEQ15, Clone M600 scout light, clone rear MBUS WE XDM Compact - enchanced recoil spring. 6 x Magpul recoil Pmags with genuine magpuls TRMR imact And a partridge in a pair tree. team flex, Airsoft_Mr B, MZKaleem and 4 others 7 Link to comment Share on other sites More sharing options...
Sam_G Posted February 17, 2015 Share Posted February 17, 2015 First time I have written it all down. Ian_Gere 1 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted February 22, 2015 Supporters Share Posted February 22, 2015 My part-custom concoction of a modular PC all decked out. About as close to an 'ideal' design as I've gotten so far, pretty close really, I'll make a few changes with the next version (whenever the manufacturers in question get the right materials in) but I've used the rig as pictured at a couple of games and it works a treat all round. cavninja and Airsoft_Mr B 2 Link to comment Share on other sites More sharing options...
Supporters Popular Post jcheeseright Posted February 24, 2015 Supporters Popular Post Share Posted February 24, 2015 Daytime setup for Stirling's OP Grandstand this weekend (night time I'll be reverting to the M4, cold is bad for gas and I don't have the best laser on the MP7). Crye CPC (medium/medium)** Toysoldier crye-style SR25 mag pouch - holds timed BFG First Spear speed reload double pistolHigh Ground Gear double adjustable 40mm - holds 2x impact BFGMayflower R&C quad MP7 shingleBlue force gear small utility on the right kidneyCrye zip-on molle backpanel - contains source bladder** TRI AN/PRC152 radio** Emerson AN/PRC152 dummy - want to replace with PRC148 ASAP2x Nexus U94 PTT - one for the TRI 152, one to a little PMR446 radio hidden away in the right side plate pocketBuck folding knife - cheap, but it only gets used for snipping paracord and filling a pouch S&S precision shiv - because shoe daggerDummy CAT, med shears, glow sticks etc for flavour. Airsoft_Mr B, cavninja, Ian_Gere and 4 others 7 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted February 25, 2015 Supporters Share Posted February 25, 2015 I saw some of those little S&S blades t'other day and was tempted, just for the coolsies... but in the end I had to listen the the wallet quietly weeping with the Balshoy Bolshevik Bash coming soon. Plus I recently bought this too, just for the s&g's: ...which actually has a spring-loaded blade so it's illegal But I'm pretty sure that not only would plod have to be in a really bad mood with me to bother, but there's a good chance that they wouldn't even notice. Strangely enough I got it from fleabay, doubly against their policies on knives and illegal items, but what i found pretty funny was that it came from an Israeli fleabayer who also included a couple of heart shaped sweeties and a really tacky looking miniature torah on a keyring! Oh the irony Airsoft_Mr B and JamesAirsofterAgent 2 Link to comment Share on other sites More sharing options...
Bottledtorment Posted March 1, 2015 Share Posted March 1, 2015 My new replica JPC with belt set-up (Note: the replica will soon be replaced by a real deal one if I get on with it) Link to comment Share on other sites More sharing options...
clumpyedge Posted March 3, 2015 Share Posted March 3, 2015 Nowhere near how i want it but it works fine for me at the moment. MODI JPC Condor Vented Baseball Cap Ferro Concepts - KTS Kydex Triple Shingle Esstac KYWI M4 Triple Mag Panel WA Pistol Mag Pouches Safariland Glock 19 Holster WAS Pouches for Grenades SeniorSpaz87, cavninja and JamesAirsofterAgent 3 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted March 3, 2015 Supporters Share Posted March 3, 2015 I am jelly of all the kydex pouches, nice rig. Got a triple panel with them being made up for my PC at the moment (ordered it about a month ago) but it's still a few weeks out at least. Think I'll have to pick up some of the ESSTAC pouches soon as well. cavninja and Airsoft_Mr B 2 Link to comment Share on other sites More sharing options...
clumpyedge Posted March 4, 2015 Share Posted March 4, 2015 I am jelly of all the kydex pouches, nice rig. Got a triple panel with them being made up for my PC at the moment (ordered it about a month ago) but it's still a few weeks out at least. Think I'll have to pick up some of the ESSTAC pouches soon as well. I cannot big these pouches up enough, they are amazing.... the price tag... not so much Airsoft_Mr B 1 Link to comment Share on other sites More sharing options...
Airsoft_Mr B Posted March 4, 2015 Share Posted March 4, 2015 Think I might get some myself when I buy a PC, shame they must be AR magazine compatible only with the Kydex inserts (cos I want an AUG) Link to comment Share on other sites More sharing options...
Bottledtorment Posted March 4, 2015 Share Posted March 4, 2015 Clumpy, would the ESSTAC carry G36 Pmags at all ? Link to comment Share on other sites More sharing options...
clumpyedge Posted March 4, 2015 Share Posted March 4, 2015 Clumpy, would the ESSTAC carry G36 Pmags at all ? You know what i'm not entirely sure on that.... Here's the link to the page, I'm at work at the moment so cant really give you anything more than that http://www.tactical-kit.co.uk/esstac-kywi-m4-triple-mag-panel-15417-p.asp Link to comment Share on other sites More sharing options...
Bottledtorment Posted March 4, 2015 Share Posted March 4, 2015 You know what i'm not entirely sure on that.... Here's the link to the page, I'm at work at the moment so cant really give you anything more than that http://www.tactical-kit.co.uk/esstac-kywi-m4-triple-mag-panel-15417-p.asp Okay mate , If you come across anyone who has some could maybe have a try for me and give me a PM? Thanks Link to comment Share on other sites More sharing options...
Popular Post Airsoft_Mr B Posted March 4, 2015 Popular Post Share Posted March 4, 2015 Monty, JamesAirsofterAgent, CaptainDumbass and 2 others 5 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted March 4, 2015 Supporters Share Posted March 4, 2015 Okay mate , If you come across anyone who has some could maybe have a try for me and give me a PM? Thanks I'd be pretty doubtful that they'd work properly. The kydex inserts in a single mag pouch are tight on a STANAG and designed to work with that specific profile. If I recall right the G36 PMAGs step up quite a bit thicker in the area that sits in the mag well? You could probably force them in to the ESSTAC pouches with a lot of 'friendly persuasion' but they'll likely be an absolute pig to get in and out overall. The 762 versions of the pouches might be a bit better but overall they're not designed for mags that aren't straight sided. They build stuff for the US market and that mostly means accommodating STANAG spec 556 mags and straight sided stuff like SCAR-H/SR-25 type mags in the .308 realm. AUGs, G36s etc are a tiny share of the market compared to guns that take your average PMAGs/USGI mags etc. clumpyedge and Airsoft_Mr B 2 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted March 4, 2015 Supporters Share Posted March 4, 2015 Good patch placement there, Mr. B! Airsoft_Mr B 1 Link to comment Share on other sites More sharing options...
jay83 Posted March 5, 2015 Share Posted March 5, 2015 My team Sinister 616 loadout. We are a Milsim team, always on the baddies side staying away from the Multicam Navy Seal loadouts. Zak Da Mack and Ian_Gere 2 Link to comment Share on other sites More sharing options...
Popular Post Mack Posted March 5, 2015 Popular Post Share Posted March 5, 2015 CaptainDumbass, cavninja, SgtTalbert and 5 others 8 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now