Shamal Posted June 17 Share Posted June 17 2 hours ago, DanBow said: 5 x Nuprol mid caps for my mag fussy GC16. is this enough, now, for an evenings CQB? FFS! That's enough for a Weekender 😂😂 DanBow and gavinkempsell 2 Link to comment Share on other sites More sharing options...
GothicGhost Posted June 17 Share Posted June 17 On 04/06/2024 at 10:22, The_Lord_Poncho said: Just a rather nicely made chest rig off Aliexpress - in my favourite Tigerstripe! Good to see more things these days available in it. Very nice, do you have a link? Thanks. Link to comment Share on other sites More sharing options...
Duncanite84 Posted June 17 Share Posted June 17 On 16/06/2024 at 10:31, Gunboat Diplomat said: Picked up some Lonex 200rd mid caps and one of the clearance ICS XAEs from Fire-Support this week, plus a new Guarder spring for my Double Eagle, all of which I shall be trying out this afternoon. XAE is a nice pistol. Link to comment Share on other sites More sharing options...
The_Lord_Poncho Posted June 18 Share Posted June 18 12 hours ago, GothicGhost said: Very nice, do you have a link? Thanks. Here you go: https://a.aliexpress.com/_EHsLtwb A few other patterns too, including desert tiger stripe. Link to comment Share on other sites More sharing options...
Caj109 Posted June 19 Share Posted June 19 Thought I'd give the delta mike face snood a go, so I can get rid of the half mesh I use now as the straps rub my ears. Cocha, DanBow and Rogerborg 3 Link to comment Share on other sites More sharing options...
DanBow Posted June 19 Share Posted June 19 3 hours ago, Caj109 said: Thought I'd give the delta mike face snood a go, so I can get rid of the half mesh I use now as the straps rub my ears. Both my daughter and I have been using these since we started. Brilliant bit of kit but it does leave a small section of the bridge of your nose uncovered and that attracts every stray bb!! lol Tackle, Caj109 and Rogerborg 2 1 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted June 19 Moderators Share Posted June 19 22 minutes ago, DanBow said: Both my daughter and I have been using these since we started. Brilliant bit of kit but it does leave a small section of the bridge of your nose uncovered and that attracts every stray bb!! lol Lol, that's SODS LAW at play.🤣 I picked one up recently but yet to test it. DanBow 1 Link to comment Share on other sites More sharing options...
Impulse Posted June 19 Share Posted June 19 Another Aliexpress success. Bought it for Vietnam games to carry my long m700 magazines, because they're far better quality magazines and far more consistent than the stubby KJW mags, and they fit perfectly. They go deeper, but thought I'd leave them there to show the space and how they fit in. Very happy with this as it'll allow me to take a lot of weight off my belt kit as these mags are heavy (because gas gun) Lozart, gavinkempsell, Egon_247 and 1 other 3 1 Link to comment Share on other sites More sharing options...
Chev Chelios Posted June 20 Share Posted June 20 Been after a Winkler Belt knife for years so last year for my birthday I splurged and ordered one. Was surprised to find the parcel in my bin shed when I got in last week. Am well happy. gavinkempsell and JimFromHorsham 2 Link to comment Share on other sites More sharing options...
LMKipper Posted June 20 Share Posted June 20 (edited) On 17/06/2024 at 15:51, johnnyj said: I went to an arms fair couple of weeks ago to sell some stuff and I even made sure to take a small amount of cash so I didn't buy but I could not turn these 2 down ! G&p mk18 mod0 and a g&p upper with gas buster charge handle.. Both for a dizzy £85 .. With the storm grip, KAC front end and cut off bayonet lug it's halfway to an L119A1. Bargain! Edited June 20 by LMKipper Link to comment Share on other sites More sharing options...
johnnyj Posted June 21 Share Posted June 21 20 hours ago, LMKipper said: With the storm grip, KAC front end and cut off bayonet lug it's halfway to an L119A1. Bargain! Yea 100% I already have a l119a1 in bits. The front sight has already been changed to f marked fsb I just need a us spec kac rail and a1 grip and it will be original again Link to comment Share on other sites More sharing options...
Popular Post gavinkempsell Posted June 21 Popular Post Share Posted June 21 So... I don't just collect pews, I collect webbing/fieldgear/ bergens etc. Had my alice for a while & got some Molle II in ACU/UCP last month so here's some pics of those. This week I also got my hands on a DPM chest rig with a DPM holster for my plce & a pattern 58 water bottle pouch to complete a set I've had since last year. I've been after a WE L85A2 GBBR for a short while but spotted this ICS Galil on Firesupport & figured I had a few L85's already but no Galil (until now). Straight out the box the front sight post had worked it's way loose from the sight body so once it's 'zeroed' I'll lock tight it in place, the gas tube is a bit wobby so will see if I can tighten that up too. johnnyj, DanBow, MrTea and 2 others 5 Link to comment Share on other sites More sharing options...
Popular Post JinxDuh Posted June 22 Popular Post Share Posted June 22 Picked up a cheap WE MEU that had a lot of bubbles and wear under the slides paint, sent it to West Lasers for a burnt bronze cerakote and engraving. I wanted something unique, and after playing through a bunch of the Tomb Raider remaster the past few weeks it seemed fitting. johnnyj, theSwede, pyromancer6 and 3 others 5 1 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted June 22 Share Posted June 22 3 hours ago, JinxDuh said: Picked up a cheap WE MEU that had a lot of bubbles and wear under the slides paint, sent it to West Lasers for a burnt bronze cerakote and engraving. I wanted something unique, and after playing through a bunch of the Tomb Raider remaster the past few weeks it seemed fitting. If you removed those “WE” logo’s, that’d look proper Gucci 👌 Link to comment Share on other sites More sharing options...
JinxDuh Posted June 22 Share Posted June 22 1 hour ago, Enid_Puceflange said: If you removed those “WE” logo’s, that’d look proper Gucci 👌 Yeah, I'm on the look out for some better grips as these are a bit raggedy anyway. Just not sure what to go for! Link to comment Share on other sites More sharing options...
johnnyj Posted June 22 Share Posted June 22 4 hours ago, JinxDuh said: Picked up a cheap WE MEU that had a lot of bubbles and wear under the slides paint, sent it to West Lasers for a burnt bronze cerakote and engraving. I wanted something unique, and after playing through a bunch of the Tomb Raider remaster the past few weeks it seemed fitting. How much did that set you back for the coating and trades ? Link to comment Share on other sites More sharing options...
JinxDuh Posted June 22 Share Posted June 22 41 minutes ago, johnnyj said: How much did that set you back for the coating and trades ? All together it was £96, with return next day postage. johnnyj 1 Link to comment Share on other sites More sharing options...
Egon_247 Posted June 23 Share Posted June 23 On 22/06/2024 at 13:08, JinxDuh said: Pretty Pew. 💌 On a slightly weird tangent, i cant watch the Tomb raider stuff and lust after finding out that the main character was based on my sister in law.... 🤯 Seems the guy that came up with the idea had it nicked off him by the game company and he fancied the pants off my (now) sister in law. All those years of watching that little ass.... Did the real Lara Croft work in a Bexleyheath Safeway supermarket? | News Shopper Apparently they settled "out of court" for a few quid... Shamal, JinxDuh and Gunboat Diplomat 1 2 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted June 24 Share Posted June 24 Treated myself to a new radio Booofwaaang Ar-152, some gel cups for my headset and to coordinate, a fresh headband too The radio is bloody MAHOOSIVE!! 😂 (Uv5r for scale) gavinkempsell, Cocha and Lozart 3 Link to comment Share on other sites More sharing options...
Egon_247 Posted June 25 Share Posted June 25 On my quest to have a British icon on my hip, I have purchased a welrod 3d printed kit for my surplus to requirements AAP01 from @VonGrimm. Have to say, it's bloody well made and some thought has gone into it. Needed a little adapter and a bit of a tweak (bolt release) and I'm 80% there. Just need to make the trigger housing disappear and make the trigger look like a water pistol now...😁 (Mag base is a lesson in "what colour filament do I have in the printer" for me! Lol. 🤣) pyromancer6, johnnyj and gavinkempsell 3 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted June 25 Supporters Share Posted June 25 12 hours ago, Enid_Puceflange said: Treated myself to a new radio Booofwaaang Ar-152, some gel cups for my headset and to coordinate, a fresh headband too The radio is bloody MAHOOSIVE!! 😂 (Uv5r for scale) I just got myself one too! Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted June 25 Share Posted June 25 22 minutes ago, Lozart said: I just got myself one too! I saw that Battery makes it heavy huh! 😂 Ive a new pouch for it on the way, A Ferro Wingman style, going to tuck it in at the front. I Might possibly need to relocate the antenna moving forwards. Link to comment Share on other sites More sharing options...
Supporters Lozart Posted June 25 Supporters Share Posted June 25 43 minutes ago, Enid_Puceflange said: I saw that Battery makes it heavy huh! 😂 Ive a new pouch for it on the way, A Ferro Wingman style, going to tuck it in at the front. I Might possibly need to relocate the antenna moving forwards. I've been building a Lone Survivor style RRV and it's currently nestled in an Eagle 152/MBITR pouch. Old school for the win! Enid_Puceflange 1 Link to comment Share on other sites More sharing options...
gavinkempsell Posted June 25 Share Posted June 25 (edited) 10 hours ago, Enid_Puceflange said: relocate the antenna moving forwards. You'll need to relocate it from your left nostril 3-4 times each game Joking aside... sure I've seen some loadouts with the antenna weaved through molle over the player/ squadies shoulder. Personally I thought that was cool which automatically stops it being 'ally'. Edited June 25 by gavinkempsell Gryph 1 Link to comment Share on other sites More sharing options...
Matt1983 Posted June 26 Share Posted June 26 Tokyo Marui Glock 17 gen4 2 spare g17 mags Cow cow hop unit Cow cow blowback housing cow cow nozzle spring flamingo 50 bucking ZCI 97mm barrel 9ball Glock gas routers gavinkempsell 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now