Supporters ImTriggerHappy Posted April 29, 2015 Supporters Share Posted April 29, 2015 I'm so broke :'( Still haven't paid off my credit card for that E&L AKS-74N I bought t'other week... It'll be a while before I can get any new toys.If you need the cash I will buy the AKS-74N off you, two thirds of new price as standard minus another 10% desperation tax😁 Unrustle_Thine_Jimmies and Airsoft_Mr B 2 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted April 29, 2015 Supporters Share Posted April 29, 2015 If you need the cash I will buy the AKS-74N off you, two thirds of new price as standard minus another 10% desperation tax And you sir can fuck off and die... ImTriggerHappy, Unrustle_Thine_Jimmies and Happy 3 Link to comment Share on other sites More sharing options...
Supporters ImTriggerHappy Posted April 29, 2015 Supporters Share Posted April 29, 2015 And you sir can f*ck off and die... Haha, you gotta try. Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted April 29, 2015 Supporters Share Posted April 29, 2015 Actually I'll give you 10% desperation and another 5% mates rates off my AK-74M - the one that's in my siggy pic. It's in the Classifieds forum... Link to comment Share on other sites More sharing options...
Supporters ImTriggerHappy Posted April 29, 2015 Supporters Share Posted April 29, 2015 Actually I'll give you 10% desperation and another 5% mates rates off my AK-74M - the one that's in my siggy pic. It's in the Classifieds forum...Very tempted but think the wife would charge me 50% divorce tax if I spend anymore on toys this month. Surprised no one has bought it yet. Ian_Gere 1 Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted April 30, 2015 Supporters Share Posted April 30, 2015 New Retro Arms Fire Selector for my SMP. Link to comment Share on other sites More sharing options...
Happy Posted April 30, 2015 Share Posted April 30, 2015 Speararms/TWI suppressor for KWA/KSC vz61 KWA/KSC vz61 long 40 round magazine This little beast is fast becoming my gun of choice for 90% of games. Time to bling it up a little Ian_Gere 1 Link to comment Share on other sites More sharing options...
shortman Posted April 30, 2015 Share Posted April 30, 2015 Just bought my first gun managed to find a pts rm4 cqb in stock at lwa. Had to go two tone but only stock and hand guard so can upgrade/swap out later. Had to get it before ukara as they seem rather hard to find Monty, airsoftwarrior147, Airsoft_Mr B and 1 other 4 Link to comment Share on other sites More sharing options...
Guest PT247 Posted May 1, 2015 Share Posted May 1, 2015 you won't regret buying an ERG mate, awesome guns! Link to comment Share on other sites More sharing options...
Albiscuit Posted May 1, 2015 Share Posted May 1, 2015 Qlimax, where did you get that stock please mate? Link to comment Share on other sites More sharing options...
Supporters sp00n Posted May 1, 2015 Supporters Share Posted May 1, 2015 today my "WE pistol release valve type A"'s arrived from milspec... instantly 200% better then the KJW ones in the KJW mags. i now get around the same number of shots out of them as the original mag in my WE barry burton i also received a TrustFire P05 600Lumen CREE XPG-R5 LED Tactical Gun Light Pistol Handgun Torch which is nice .. except it takes a CR2 battery ... and i have none of them Edit :- just went to my local airsoft retailer to look at a TM MEU ... walked out with a dynatex BFG, SMG sized hard case (for my pistols), and a can of green gas Link to comment Share on other sites More sharing options...
Popular Post clumpyedge Posted May 1, 2015 Popular Post Share Posted May 1, 2015 my newest toy Mr Monkey Nuts, Airsoft_Mr B, AirsoftTed and 6 others 9 Link to comment Share on other sites More sharing options...
Guest PT247 Posted May 1, 2015 Share Posted May 1, 2015 375mm 6.01 PDI barrel for my GHK G5, combined with the high-flow nozzle the extra 145mm length and the drop from 6.20 to 6.01 in diameter should drop the psi required for each shot considerably to get 350fps edit: also 8000 Airsoft Surgeon RWA ABS Precision Grade 0.30g BBs WOWZERS, no idea how straight it is shooting but it is now firing at 500fps on gas mags! Should def allow me to run a lower pressure on my HPA set up! :-) Link to comment Share on other sites More sharing options...
Happy Posted May 1, 2015 Share Posted May 1, 2015 my newest toyVery jealous. Really want one but can't justify the cost to the other half -.-' Link to comment Share on other sites More sharing options...
Tad Posted May 1, 2015 Share Posted May 1, 2015 My wallet is in pain... A&K M4 Upgrades ------------------------ Firestorm mosfet (Installed last night) ASG Ultimate M110 Spring 11.1v 1300mAh Battery AGM L96 Upgrades ------------------------- Steel cylinder head Stainless Steel cylinder (Import from Atlanta Airsoft!) VSR Spring guide and Piston M150 spring Other stuff ----------------- Various nuts and bolts set Viper Modular GPS Radio Pouch EJY X400 UV Protection Outdoor Goggles YTM Airsoft Adjustable Maritime Helmet ABS This weekend i'm looking at these for the team: 5 Pack BaoFeng BF-888S Long Range Link to comment Share on other sites More sharing options...
clumpyedge Posted May 1, 2015 Share Posted May 1, 2015 Very jealous. Really want one but can't justify the cost to the other half -.-' we bought 2 if that makes you feel any better? Ian_Gere 1 Link to comment Share on other sites More sharing options...
Lowlander Posted May 1, 2015 Share Posted May 1, 2015 Tippmann M4, air bottle, remote line, 6k bbs with an agalite assault pack to follow next week. sp00n, Sitting Duck, Airsoft_Mr B and 1 other 4 Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted May 1, 2015 Supporters Share Posted May 1, 2015 My wallet is in pain... A&K M4 Upgrades ------------------------ Firestorm mosfet (Installed last night) +1 for the dinky little fet - £10 delivered with built in fuse etc..... actually +2 - seems bloody good under stress tests good bit of wire supplied - fancy box highly recommend them - if anybody needs a cheap good fet ready to go you won't go wrong with them even build your own 3034 would cost ya say £5 with getting bits n bobs & wire, so for a tenner - good call m8 I just ordered up some more deans & bits for my own fet's but the firestorm fet I am well pleased with it is non-AB fet but tbh most of time AB is not needed for most builds unless you are really going nutz Link to comment Share on other sites More sharing options...
Tad Posted May 1, 2015 Share Posted May 1, 2015 +1 for the dinky little fet - £10 delivered with built in fuse etc..... actually +2 - seems bloody good under stress tests good bit of wire supplied - fancy box highly recommend them - if anybody needs a cheap good fet ready to go you won't go wrong with them even build your own 3034 would cost ya say £5 with getting bits n bobs & wire, so for a tenner - good call m8 I just ordered up some more deans & bits for my own fet's but the firestorm fet I am well pleased with it is non-AB fet but tbh most of time AB is not needed for most builds unless you are really going nutz This is just it. It's going in a CQB version which will be my primary and after some testing fires, it's lovely! When i eventually get another project, it'll be a full Mosfet with a programmable burst on the semi, but until then this is A) Cheap and perfect for starting out. The wires themselves are about 19 gauge i think so i would deffinately look to beef them up to 18 or 16 later. Link to comment Share on other sites More sharing options...
shortman Posted May 1, 2015 Share Posted May 1, 2015 my newest toy Im also a bit jelly. Keep lookin at shot guns........ Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted May 1, 2015 Supporters Share Posted May 1, 2015 The wires themselves are about 19 gauge i think so i would deffinately look to beef them up to 18 or 16 later. Thought they were a bit thicker sure it said 16awg on wire supplied - you can't always go by the outer thickness - it is the actual wire itself or Conductive Surface Area malarky that counts...... switch wire was very thin - but I actually use a tiny bit thinner twin ptfe wire for trigger/switch signal wire cheap silver wire that fits in almost any gun: http://www.taiwangun.com/en/2-meter-wire-with-low-resistance-ipower?from=listing&campaign-id=14 (cheaper 2m length seems the same) http://www.taiwangun.com/en/1-8-meter-wire-with-low-resistance?from=listing&campaign-id=14 (1.8m but same sort of stuff) They are a good price for decent wire for most builds - thinner but stiffer insulation than fatty 16awg silicone turnigy wire much cheaper than buying the Modify brand over here - well next time anybody does a TWG order easier to fit in tight v2 boxes than silicone, especially where motor is v3 boxes wire is external so you can run thicker stuff outside the box Always deans, solder the "bends" of motor connectors - they can blow like a fuse when bent on M4's so I "carefully" dab solder on the elbow/bends (dab of solder inside/outside of bend - hold connector upwards to avoid solder running down motor connector end though) These are the 2 points where you encounter the most resistance & drop in "juice efficiency" (check connectors are tight fit on motor of course) Ultra thick as possible wire is great but them connectors - the connector bends on M4's are so weak, plus not easy to solder wires direct to motor on M4's Run thicker wire with the least amount of joins/breaks as possible - any joins must be as solid as possible or more loss from resistance in joins Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted May 2, 2015 Supporters Share Posted May 2, 2015 ^^I would always recommend soldering the motor connections - a soldered joint is always lower resistance than a spade connector, even when the spade connector is tightened on with a squeeze from pliers. Sitting Duck 1 Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted May 2, 2015 Supporters Share Posted May 2, 2015 ^^I would always recommend soldering the motor connections - a soldered joint is always lower resistance than a spade connector, even when the spade connector is tightened on with a squeeze from pliers. 101% agree if you are happy with setup/motor - solder is best but depends on ya gun/box V3 - nice n easy to do/remove - did solder motor on AK12, can always remove frame/motor option to work on box V2 - bit more of git to do - so soldered the connectors with extra solder on bends on recent DSG FH (or would have to keep desolder/resolder motor to work on box) Some guy did solder a v2 motor and had bananna type plug/socket in pistol grip but space could get tight for motor in there plus it's another join Hence did the connectors still - ensured tight fit on motor & extra solder on 90 degree bends - damn V2's Link to comment Share on other sites More sharing options...
Supporters sp00n Posted May 2, 2015 Supporters Share Posted May 2, 2015 i have just received a "Tactical Flashlight Q5 LED Light Bulb Foregrip Rail Aluminum Outdoor Heavy Duty" its weighty, not heavy, and nice and bright ... just wish the on/off button was a pressure pad not a clicky on/off/strobe button. also received the CR2 batteries and charger from amazon .. that was very interesting, managed to get guaranteed by 1pm next day delivery ... for free (no i am not a prime customer) Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted May 2, 2015 Supporters Share Posted May 2, 2015 101% agree if you are happy with setup/motor - solder is best but depends on ya gun/box V3 - nice n easy to do/remove - did solder motor on AK12, can always remove frame/motor option to work on box V2 - bit more of git to do - so soldered the connectors with extra solder on bends on recent DSG FH (or would have to keep desolder/resolder motor to work on box) Some guy did solder a v2 motor and had bananna type plug/socket in pistol grip but space could get tight for motor in there plus it's another join Hence did the connectors still - ensured tight fit on motor & extra solder on 90 degree bends - damn V2's The way I would do it (if I was into M4's which I'm not ) is to not bother curving the wire round in the same way it does when you have a spade connector on the end, but rather to cut the wire so it goes straight down to the motor terminals and solder them 'upside down' if you see what i mean. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now