team flex Posted August 25, 2014 Share Posted August 25, 2014 9 Pmags. where did you get them from? Link to comment Share on other sites More sharing options...
Supporters Lozart Posted August 25, 2014 Supporters Share Posted August 25, 2014 TM G3 SG1 Accessories : 2x Classic Army High cap Mag's, Besonder opschtic 6-24x50 scope W/scope mounts and FU lens, 8.4V 2100mha NiMh Battery CA g3/mp5 rail, JG m130 spring he threw in a gun case and charger too Jesus wept! Just what sort of range are you expecting to get from that G3?!?!? Ian_Gere 1 Link to comment Share on other sites More sharing options...
Richie Boyle Posted August 25, 2014 Share Posted August 25, 2014 no idea but i spotted the advert and asked a mates advice. he said bite his hand off so i did. £270 for everything but it seems to have a power issue. nothing is happening and i have charged the battery. someone is having a look at it for me this week fixed it myself. i got brave and pulled out 2 screws holding the stock on. there was an unconnected connector inside. all seems well now Ian_Gere 1 Link to comment Share on other sites More sharing options...
Supporters Monty Posted August 25, 2014 Supporters Share Posted August 25, 2014 where did you get them from? Mateyguv. £40 for them. team flex 1 Link to comment Share on other sites More sharing options...
b1n0gHo5t Posted August 25, 2014 Share Posted August 25, 2014 no idea but i spotted the advert and asked a mates advice. he said bite his hand off so i did. £270 for everything but it seems to have a power issue. nothing is happening and i have charged the battery. someone is having a look at it for me this week erm has the battery bubbled or is that only a problem with lipo's? as i charged a lipo for 6 hours and only got 100 rounds through before it died..which led to me checking to find two sides had bubbled i quickly put that PoS outside away from anything flammable haha Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted August 25, 2014 Supporters Share Posted August 25, 2014 no idea but i spotted the advert and asked a mates advice. he said bite his hand off so i did. £270 for everything but it seems to have a power issue. nothing is happening and i have charged the battery. someone is having a look at it for me this week might be motor problem or hopefully something straight forward.... let us know when it gets sorted and where you are going to test it out coz I WON'T be feckin going there in case ya find me in your lovely sights very nice setup - hope it is an easy fix, I like that dmr mofo bad boy Link to comment Share on other sites More sharing options...
team flex Posted August 25, 2014 Share Posted August 25, 2014 Mateyguv. £40 for them. lucky b*stard that is a great price... now I am annoyed Monty 1 Link to comment Share on other sites More sharing options...
Richie Boyle Posted August 25, 2014 Share Posted August 25, 2014 fixed it. i removed the stock and found a connector inside that wasnt connected. now it is making satisfying noises so i will be taking it to POW on sunday i wouldnt worry about the scope. the seller advised me to start off with the iron sights and the scope is far beyond my knowledge so other than turning on the red/green crosses, i havent the faintest idea about setting it up. far too many bits that turn and have numbers on them apart from the seemingly self explanatory one. it says YARDS so i guess i set that to the range i am firing at Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted August 25, 2014 Supporters Share Posted August 25, 2014 130 spring = 425fps so presume it is locked to semi for dmr and min engagement 30m probably .25's for accuracy n scope is taking out them sods before they see you.... maybe a nice compact mp5 or good pistol as secondary if doing the dmr thingy I might have to look at that style coz I just get owned mostly when trying to assault up front, flank - nah I get owned but all good fun - nice gun m8 glad it was easy fix Link to comment Share on other sites More sharing options...
Richie Boyle Posted August 25, 2014 Share Posted August 25, 2014 the M130 spring wasnt fitted. it was bought with a DMR in mind for future upgrades but he is going for CQB instead. the gun is around 290 fps as it stands now. i dont seem to have the upgrade spring so i wont worry about breaching fps limits although i would like to get a lot closer to them while still using the site supplied beebs Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted August 25, 2014 Supporters Share Posted August 25, 2014 nice gun & glad it sorted Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted August 26, 2014 Supporters Share Posted August 26, 2014 Dream Army Double O-Ring Aluminium Piston Head w/ Bearings - £6.99 posted - khmountain_uk on fleabay I don't really trust the brand, but the Magic Box ones seem to have run out everywhere for the time being. The FPS increase from these has been around 20 both times I've tried the Magic Box ones, but that has also included regreasing with CT-2 and changes of hop rubber and/or air seal nozzle. There is no doubt though that they do provide a considerable boost, which can be useful in either bringing the power of a gun using an M100 spring closer to 350FPS w/ 0.2's or, if you are also running a TBB, allowing a spring downgrade which then gives a higher ROF / faster trigger response. Prasent 100m OD Rayon Raffia - £6.48 ~ Amazon (for ghillie suit) Sitting Duck 1 Link to comment Share on other sites More sharing options...
Popular Post Mack Posted August 26, 2014 Popular Post Share Posted August 26, 2014 Solidfox copy of the Crye CPC for £168 shipped Bottledtorment, team flex, Monty and 3 others 6 Link to comment Share on other sites More sharing options...
Supporters Popular Post M_P Posted August 26, 2014 Supporters Popular Post Share Posted August 26, 2014 WE ACR WE M4 WE xm177 Mags. I just awsomed up a level. Airsoft_Mr B, Happy, Monty and 2 others 5 Link to comment Share on other sites More sharing options...
AirsoftTed Posted August 26, 2014 Share Posted August 26, 2014 WE ACR WE M4 WE xm177 Mags. I just awsomed up a level. Who's Granny have you sold to pay for that lot ! Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted August 26, 2014 Supporters Share Posted August 26, 2014 (edited) Kanzen Bearings for Vz61 Skorpion - €20 posted ~ fleabay MAG Magnesium Piston & 130% Spring for Vz61 Skorpion - $41.28 posted ~ Airsoft Global SHS Steel Vz61 Gears - $7.86 + $16.56 P&P ~ airsoft.tiger111hk.com D-Boys 190mm Aluminium Outer Barrel - $10.64 + $6.96 P&P ~ airsoft.tiger111hk.com D-Boys AKS-74U Front Sight - £14.98 posted ~ dualdealshop on fleabay CYMA Metal Hop Up Chamber for AK - £9 posted ~ dualdealshop AK/M4 Stock Adapter Model A - $13.98 posted ~ ebairsoft.com Soviet Russian Army Respirator PBF EO-19 - £18.99 posted ~ fleabay Edited August 26, 2014 by Ian_Gere bearings Link to comment Share on other sites More sharing options...
Supporters M_P Posted August 26, 2014 Supporters Share Posted August 26, 2014 Who's Granny have you sold to pay for that lot ! I sold off most of the population of Eastbourne. Airsoft_Mr B, Esoterick and AirsoftTed 3 Link to comment Share on other sites More sharing options...
AirsoftTed Posted August 26, 2014 Share Posted August 26, 2014 Are North Korea starting a bowls team or something? M_P and Bottledtorment 2 Link to comment Share on other sites More sharing options...
Supporters M_P Posted August 26, 2014 Supporters Share Posted August 26, 2014 No they're hosting the bingo world championship next April AirsoftTed and Ian_Gere 2 Link to comment Share on other sites More sharing options...
Albiscuit Posted August 26, 2014 Share Posted August 26, 2014 Viper Multicam M4 double pouch Offset rail adaptor Torch holder for above, only to find my torch does not fit GRR And attempted to buy a RIS front end for my MP5K to be told "we cant find it sir", left my number, 2 hours later, "we have found it, do you still want it" GRRRRR So spent money, but a few GRRRs lol, will pop back to the store tomo and finish up my Mp5K FINALLY Monty 1 Link to comment Share on other sites More sharing options...
clumpyedge Posted August 27, 2014 Share Posted August 27, 2014 25 flash bangs 15 high emission smokes 15 mk3 remote dets 12 thunder b trip mine shells Element scout torch Contour lens protector NATO patches First aid packs 16gb micro SD card (for contour) Monty 1 Link to comment Share on other sites More sharing options...
Happy Posted August 27, 2014 Share Posted August 27, 2014 Yet another mag for my ASG MK23 Socom @ £26.99 with free postage. I swear this thing is turning into my primary weapon since I use it so much. Since the fixed hop is great for .3g BBs, I may look at putting in a new inner barrel, adding a scope rail and turning it into a Designated Marksman Pistol like I saw someone do on a different forum haha Airsoft_Mr B and clumpyedge 2 Link to comment Share on other sites More sharing options...
Supporters Monty Posted August 27, 2014 Supporters Share Posted August 27, 2014 A bunch of bits from MateyGuv and trigger contacts for my PDW as I fucked up the wiring. Link to comment Share on other sites More sharing options...
straffham Posted August 27, 2014 Share Posted August 27, 2014 AK/M4 Stock Adapter Model A - $13.98 posted ~ ebairsoft.com Hey Ian, which AK versions will that adapter fit? I have an old Cyma CM 028s which I'd like to do something similar with as the folding stock broke so filled the holes in the stock and fitted an AIMS foregrip to a modded front end, hence needs a stock sorting now. Link to comment Share on other sites More sharing options...
straffham Posted August 27, 2014 Share Posted August 27, 2014 ZCI V2 gearbox shell - quick release spring ZCI Aluminium black cylinder ZCI reinforced steel 14 tooth piston From our very own ak2m4 Pete. www.ak2m4.co.uk Airsoft_Mr B 1 Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now