Supporters Druid799 Posted March 15, 2022 Supporters Share Posted March 15, 2022 On 15/03/2022 at 11:31, frontsight said: All I saw was the pulse rifle haha😂 does it actually show you the roundcount as well? EDIT: HOLY SHIT IT DOES Expand Oh yes it does ! it counts from 95 down to zero its designed to use short Thompson mags of which the Hi-caps hold 200 . You fill the mag load it in start shooting it , it hits zero you pull the mag out a wee bit push it back in ,,,,,,,,,,,,AND it re-sets to 95 so basically you’ve got an accurate round counter ! 😍 EDcase, frontsight and Rogerborg 3 Link to comment Share on other sites More sharing options...
Skullchewer Posted March 16, 2022 Share Posted March 16, 2022 On 14/03/2022 at 23:40, EDcase said: Latest family reunion Do you ever get the feeling its time for a bigger sofa? Expand I will sell someone's granny for the M41A 😭 Sebza and Pinovic 1 1 Link to comment Share on other sites More sharing options...
EDcase Posted March 16, 2022 Share Posted March 16, 2022 On 16/03/2022 at 18:47, Skullchewer said: I will sell someone's granny for the M41A 😭 Expand Got it from BBGuns4Less You can still get the brown one (more technically correct colour) Snow Wolf M41A Pulse Rifle AEG AKA The Alien Gun in Tan - bbguns4less Link to comment Share on other sites More sharing options...
Popular Post Sifu Steve Posted March 16, 2022 Popular Post Share Posted March 16, 2022 Just finished another weathered paint job. This is 'Starry'*. I wanted it to look like it's been dug up out of a Ukrainian garden after 20 years and recalled to active service... and I think it worked. 😁 Method: I stripped it back to bare metal, primed and repainted black so that when the paint inevitably chips, it's exposes the metal. I then used acrylic rust colours from brown to orange, dabbed on with foam in patches. The whole lot was then covered in an uneven textured 'technical' acrylic to give it the caked-up finish. The wood was sanded to remove the top layer then I used an aggressive sanding brush disc to carve runs into it. It was then doused in an oil-coloured acrylic wash to make it look distressed and a bit rotten. Finally, it was airbrushed with layers of matte varnish and chipping agent. Long live the 'Kraine! 🇺🇦 *Real name 'staryy brudnyy svoloch' (старий брудний сволоч) which is Ukrainian for 'Old Dirty Bastard'. lekne, Khyber, Skullchewer and 6 others 4 5 Link to comment Share on other sites More sharing options...
EDcase Posted March 16, 2022 Share Posted March 16, 2022 (edited) I like a bit of wear to make things look more real but that's going a bit too far for me 😲 Very good job tho 👍 Really looks like it was dug up from somewhere. Edited March 16, 2022 by EDcase Rogerborg and Sebza 2 Link to comment Share on other sites More sharing options...
Sifu Steve Posted March 16, 2022 Share Posted March 16, 2022 On 16/03/2022 at 19:22, EDcase said: I like a bit wear to make things look more real but that's going a bit too far for me 😲 Very good job tho. Really looks like it was dug up from somewhere Expand Yeah, it's definitely on the top end of the 'worn' scale. 😄 I recently finished a job for someone at my local club, weathering their bland 'stainless steel'-coloured DEagle into a rather nice black. frontsight and Skullchewer 1 1 Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted March 16, 2022 Supporters Share Posted March 16, 2022 On 16/03/2022 at 19:11, Sifu Steve said: Just finished another weathered paint job. This is 'Starry'*. I wanted it to look like it's been dug up out of a Ukrainian garden after 20 years and recalled to active service... and I think it worked. 😁 Method: I stripped it back to bare metal, primed and repainted black so that when the paint inevitably chips, it's exposes the metal. I then used acrylic rust colours from brown to orange, dabbed on with foam in patches. The whole lot was then covered in an uneven textured 'technical' acrylic to give it the caked-up finish. The wood was sanded to remove the top layer then I used an aggressive sanding brush disc to carve runs into it. It was then doused in an oil-coloured acrylic wash to make it look distressed and a bit rotten. Finally, it was airbrushed with layers of matte varnish and chipping agent. Long live the 'Kraine! 🇺🇦 *Real name 'staryy brudnyy svoloch' (старий брудний сволоч) which is Ukrainian for 'Old Dirty Bastard'. Expand Well I for one think that good sir a work of fecking art ! 😍 Sifu Steve 1 Link to comment Share on other sites More sharing options...
Popular Post The Waco Kid Posted March 17, 2022 Popular Post Share Posted March 17, 2022 You ain’t seen me, right. Sebza, Skullchewer, Nick G and 3 others 6 Link to comment Share on other sites More sharing options...
Skullchewer Posted March 17, 2022 Share Posted March 17, 2022 On 16/03/2022 at 19:05, EDcase said: Got it from BBGuns4Less You can still get the brown one (more technically correct colour) Snow Wolf M41A Pulse Rifle AEG AKA The Alien Gun in Tan - bbguns4less Expand Cool, now I just need a granny to sell 😉 EDcase 1 Link to comment Share on other sites More sharing options...
Popular Post CrackCommandoUnit1972 Posted March 17, 2022 Popular Post Share Posted March 17, 2022 Got this little (it's massive) beauty. A JG RPK. So far it seems good. Well made with electric blow back, shooting around 320fps with 0.2g bbs and a snappy rate of fire on a 7.2v lipo. Hoping to give it a gun run out at the weekend. Mantle, PopRocket123, Cannonfodder and 6 others 8 1 Link to comment Share on other sites More sharing options...
Popular Post Mad-Al Posted March 19, 2022 Popular Post Share Posted March 19, 2022 (edited) Lilamd large urgis, Top: Tm NGRS with leupold mk4 cqt, magpul hand stop and wired to deans. Bottom: Golden eagle gbbr with: Aimpoint comp m4 Magpul CTR Angry gun airborn charging handle Ali exress rvg Ali express sf 4 prong flash hider Internals: ML crazy jet, super silicone rubber, omega nub, ra tech steel bolt carrier and 3 round burst kit this is my first gbbr and first time properly tinkering and so far i much prefer working with these to aegs, for a start i can actually get the internals back together again! Edited March 19, 2022 by Mad-Al Jake_RFT1695, Jacob Wright, CrackCommandoUnit1972 and 3 others 3 3 Link to comment Share on other sites More sharing options...
Popular Post Kls77 Posted March 22, 2022 Popular Post Share Posted March 22, 2022 My tarkov AK. Lct blah blah blah and somemore blah upgrades haha Alimcd, Skara, PopRocket123 and 9 others 7 5 Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted March 22, 2022 Supporters Share Posted March 22, 2022 On 22/03/2022 at 12:10, Kls77 said: My tarkov AK. Lct blah blah blah and somemore blah upgrades haha Expand Looks strangely unnerving , yet also cool as fornication ! 😳 Link to comment Share on other sites More sharing options...
Popular Post Kls77 Posted March 23, 2022 Popular Post Share Posted March 23, 2022 Here's my cqb gun Lct blah blah blah blah and more blah Alimcd, Pinovic, Enid_Puceflange and 4 others 5 2 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted March 23, 2022 Share Posted March 23, 2022 I love a built Ak But that looks like it missed Leg Day a LOT COOL though 😎 Link to comment Share on other sites More sharing options...
PopRocket123 Posted March 23, 2022 Share Posted March 23, 2022 On 23/03/2022 at 14:50, Enid_Puceflange said: I love a built Ak But that looks like it missed Leg Day a LOT COOL though 😎 Expand You're probably not going to like this then 🤣 frontsight 1 Link to comment Share on other sites More sharing options...
Popular Post Niktimes3 Posted March 23, 2022 Popular Post Share Posted March 23, 2022 (edited) Going for the used look 😂 Edited March 24, 2022 by Niktimes3 Pinovic, frontsight, Nick G and 3 others 3 3 Link to comment Share on other sites More sharing options...
Pinovic Posted March 24, 2022 Share Posted March 24, 2022 Two Mauser K98. One deactivated, one PPS gas airsoft. Can you tell which is which? 🙃 Need some modifications to fix the bayonet properly PopRocket123, frontsight, Nick G and 1 other 3 1 Link to comment Share on other sites More sharing options...
frontsight Posted March 24, 2022 Share Posted March 24, 2022 Finally done with the bowling pin build! With the massive comp it won't even fit in my pistol case anymore🙃 Nick G, PopRocket123, k.a and 1 other 4 Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted March 26, 2022 Supporters Share Posted March 26, 2022 Next project , twin mounted Maxim guns with a Red dot ! Alla the Russian invasion of the Ukraine .😳😆😆 EDcase, Tackle and PopRocket123 3 Link to comment Share on other sites More sharing options...
PopRocket123 Posted March 26, 2022 Share Posted March 26, 2022 Ready for tomorrow frontsight 1 Link to comment Share on other sites More sharing options...
Wavey_Gravey Posted March 26, 2022 Share Posted March 26, 2022 What the fudge is that bottom left of the case?! Link to comment Share on other sites More sharing options...
PopRocket123 Posted March 26, 2022 Share Posted March 26, 2022 On 26/03/2022 at 22:46, Wavey_Gravey said: What the fudge is that bottom left of the case?! Expand Just mags and a scope Link to comment Share on other sites More sharing options...
Wavey_Gravey Posted March 27, 2022 Share Posted March 27, 2022 Sorry, as if you were looking at the case front on, the strange bulpup looking gun? Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted March 27, 2022 Supporters Share Posted March 27, 2022 On 27/03/2022 at 13:12, Wavey_Gravey said: Sorry, as if you were looking at the case front on, the strange bulpup looking gun? Expand Unless I am mistook THAT is a bullpup AK ! 😍 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now