TacMaster Posted October 9, 2014 Share Posted October 9, 2014 Sliding stock is the best on the MP5. It's one of the main advantages of the MP5 for CQB, as well as looking damn good. Ian_Gere and Esoterick 2 Link to comment Share on other sites More sharing options...
airsoftwarrior147 Posted October 9, 2014 Share Posted October 9, 2014 Ok, as I've got an mp5sd6? Full stock at the moment but only use it for cqb anyway, it alters between that and my m4 so I figured might be best. Just got to learn how to rewirw it. Final question- how the hell do you a) take the fire selector off and mp5 get the gearbox out Link to comment Share on other sites More sharing options...
TacMaster Posted October 9, 2014 Share Posted October 9, 2014 There should be a hex bolt on one of the fire selectors, probably on the bottom of it. Undo that and you can take that one off, and pull the other (with the connecting bar) out. As for the gearbox removal: Remove the motor plate Disconnect the motor There should be 2 screws on the inside on the plastic dividing wall between the gearbox and the motor cavity. These need to be undone Lift the gearbox out There may be a couple of other screws you need to remove before taking the GB out and it could vary per model- I was used to my old CYMA MP5A5 and I haven't had that for a while. Ian_Gere and Airsoft_Mr B 2 Link to comment Share on other sites More sharing options...
Popular Post THE FNG Posted October 9, 2014 Popular Post Share Posted October 9, 2014 'The negotiator' And the rest of my current arsenal... SCAR-L CQC w/EGLM MP9A3 FN 5-7 x2 Josh95, TacMaster, Monty and 2 others 5 Link to comment Share on other sites More sharing options...
airsoftwarrior147 Posted October 9, 2014 Share Posted October 9, 2014 Thanks tac, will have a look tommorow TacMaster 1 Link to comment Share on other sites More sharing options...
joshcowin Posted October 9, 2014 Share Posted October 9, 2014 Cheers chap, a couple more.... that m14 though Darkmikey22 1 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted October 9, 2014 Supporters Share Posted October 9, 2014 Ok, as I've got an mp5sd6? Full stock at the moment but only use it for cqb anyway, it alters between that and my m4 so I figured might be best. Just got to learn how to rewirw it. Final question- how the hell do you a) take the fire selector off and mp5 get the gearbox out If it's a fixed stock, it's not an SD6. Fixed stocks are either SD2 (SEF trigger group) or SD5 (ambi trigger group). The SD6 is a sliding stock and ambi trigger group version. Link to comment Share on other sites More sharing options...
JamesAirsofterAgent Posted October 9, 2014 Share Posted October 9, 2014 Why you make me so jealous with more!!!!!!!!!!!!! Link to comment Share on other sites More sharing options...
airsoftwarrior147 Posted October 10, 2014 Share Posted October 10, 2014 Lozart thanks Lozart 1 Link to comment Share on other sites More sharing options...
airsoftwarrior147 Posted October 10, 2014 Share Posted October 10, 2014 Just took delivery of my 11" troy ras, will try and fit it then out tm some pictures up Airsoft_Mr B 1 Link to comment Share on other sites More sharing options...
snoopholy Posted October 11, 2014 Share Posted October 11, 2014 Pft, counting the failed attempt at one probably near £1000 the one pictured was around £500 on it's own, not got the Diemaco body, just the stock ca metal one, hence paintjob to cover the m15a4 trades Sorry, bit off topic, were can i get some of the netting that the gun is laying on, wanting some to camo my scope up. Cheers Dave Link to comment Share on other sites More sharing options...
Popular Post GiantKiwi Posted October 14, 2014 Popular Post Share Posted October 14, 2014 Continuation of the work on the WE - Stock WE bolt works better than the RAT PoS in the UK, however I decided, it 1) is Ugly as sin, 2) could be a whole load better. So, tonight I started the process of polishing it - 1st Stage - And in situ - Already cycles considerably better, and SHINY. Ian_Gere, team flex, JamesAirsofterAgent and 2 others 5 Link to comment Share on other sites More sharing options...
Supporters Popular Post Qlimax Posted October 17, 2014 Supporters Popular Post Share Posted October 17, 2014 Don't know which to have on my SMP. ICS QD Silencer or Diablo flash hider..... JackHG, joshcowin, JamesAirsofterAgent and 3 others 6 Link to comment Share on other sites More sharing options...
Airsoft_Mr B Posted October 17, 2014 Share Posted October 17, 2014 Don't know which to have on my SMP. ICS QD Silencer or Diablo flash hider..... I'd say the suppressor team flex, Qlimax, Ian_Gere and 1 other 4 Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted October 17, 2014 Supporters Share Posted October 17, 2014 I'd say the suppressor was thinking that as well. The diablo does look good though Link to comment Share on other sites More sharing options...
Supporters Monty Posted October 17, 2014 Supporters Share Posted October 17, 2014 Qlimax your M4 looks insane, how did you do the Shock & Awe engraving on the side? Or is it a decal? Qlimax 1 Link to comment Share on other sites More sharing options...
Josh95 Posted October 17, 2014 Share Posted October 17, 2014 I would personally prefer just a normal M4 style flash hider, I have to say however the gun does look very impressive Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted October 17, 2014 Supporters Share Posted October 17, 2014 I would personally prefer just a normal M4 style flash hider, I have to say however the gun does look very impressive Qlimax your M4 looks insane, how did you do the Shock & Awe engraving on the side? Or is it a decal? Take the silencer off and its a standard flash hider but on an SMP the silencer makes it even more quite. the SAA on the side is a vinyl I've made as a test to see how it looks. Monty 1 Link to comment Share on other sites More sharing options...
joshcowin Posted October 17, 2014 Share Posted October 17, 2014 Don't know which to have on my SMP. ICS QD Silencer or Diablo flash hider..... very nice build mate kudos Qlimax and cavninja 2 Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted October 18, 2014 Supporters Share Posted October 18, 2014 very nice build mate kudos Thanks man, cost a pretty penny in the end. It has been worth it just a shame it's two colours lol so had to try even it out Link to comment Share on other sites More sharing options...
Supporters Nutster Posted October 18, 2014 Supporters Share Posted October 18, 2014 Sorry, bit off topic, were can i get some of the netting that the gun is laying on, wanting some to camo my scope up. Cheers Dave It's just camo print skrim net Airsoft_Mr B 1 Link to comment Share on other sites More sharing options...
JackHG Posted October 19, 2014 Share Posted October 19, 2014 Thanks man, cost a pretty penny in the end. It has been worth it just a shame it's two colours lol so had to try even it outWhat base gun did u use? Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted October 20, 2014 Supporters Share Posted October 20, 2014 What base gun did u use? the base weapon is a G&G TR4 CQB-H Link to comment Share on other sites More sharing options...
rikkilous Posted October 20, 2014 Share Posted October 20, 2014 this is my little project started off life as an ameoba 009, i really wanted the honey badger but wanted to make my own so this is how far ive got any pointers welcome http://s1117.photobucket.com/user/rikkilous/media/IMG-20141017-WA0006.jpg.html?sort=3&o=0 http://s1117.photobucket.com/user/rikkilous/media/IMG-20141017-WA0004.jpg.html?sort=3&o=1 http://s1117.photobucket.com/user/rikkilous/media/IMG-20141017-WA0002.jpg.html?sort=3&o=2 http://s1117.photobucket.com/user/rikkilous/media/IMG-20141017-WA0000.jpg.html?sort=3&o=3 Monty 1 Link to comment Share on other sites More sharing options...
team flex Posted October 20, 2014 Share Posted October 20, 2014 this is my little project started off life as an ameoba 009, i really wanted the honey badger but wanted to make my own so this is how far ive got any pointers welcome http://s1117.photobucket.com/user/rikkilous/media/IMG-20141017-WA0006.jpg.html?sort=3&o=0 http://s1117.photobucket.com/user/rikkilous/media/IMG-20141017-WA0004.jpg.html?sort=3&o=1 http://s1117.photobucket.com/user/rikkilous/media/IMG-20141017-WA0002.jpg.html?sort=3&o=2 http://s1117.photobucket.com/user/rikkilous/media/IMG-20141017-WA0000.jpg.html?sort=3&o=3 NOTE THIS ISN'T MY GUN, BUT IT IS RIKKILOUS' GUN very nice gun mate, just put them into pictures for you here. Have you swapped out any of the internals and, guessing its an ares, how were the stock internals? Picture wise, nomally just take the url and put it into the picture image on the dashboard, however that didn't work so I copied the "IMG" on the right side. WIth this forum you can delete the URL part seen here (delete this) and it will look like [img ]http://i1117.p hotobucket.c om/albu ms/ k 591/rikk ilous/IM G -20141 0 17-WA0 000.jpg[/iM G] (added spaces to show what it should look like) All you need is the IMG part pretty much, just looks tidier rikkilous 1 Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now