AK47frizzle
-
Posts
1,438 -
Joined
-
Last visited
-
Days Won
8 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by AK47frizzle
-
Yes, battery is in peq. Long story short, it was the best position to put it in. There is no space inside the gun whatsoever for a reasonably sized battery. I also have plans to achieve better surface finish, and that is to use a textured sheet by prusa. I am currently reiterating some parts of the kit to be printed in two halves so that a plastic texture akin to magpul stuff can be achieved. Resin is better for surface quality, yes. However, the process is extremely long, tedious, and potentially toxic that I can't really justify using them in-house currently. There are strong resins out there but nothing that I have seen that can withstand hammer blows like with the currently material I am using (polymax pla). The stock is actually very strong despite how it looks ahaha. It's mostly dense and I use a strong material called Polymax PLA which doesn't shatter at all.
-
I See Novritsch Has Noticed These Forums Then....
AK47frizzle replied to Speedbird_666's topic in Forum Feedback
Yo it's a lil too early for april fools man... -
I will try contact him. Though I'm not sure if he uses, or is willing to use discord. Might work around it.
-
Why hello there. Some of you may have known that I’ve been developing this thing for the past year. It has gone through one test phase, and now it is time for the second: the beta test of the MOSQUITO kit. So, what is this thing you may be wondering? Well, (doing a ctrl+c and ctrl+v of myself….): “Inspired by the PP-91 KEDR, the MOSQUITO is an ultra compact, lightweight, and modular kit for an AK AEG. A fully assembled kit weighs only around 1.4kg, and has a max length of 577mm with stock unfolded (341mm folded). Disassembly is made easy via stainless steel pins, and hop up can be adjusted on the fly. Want to experience a true small form factor with a big punch? This could be the thing for you.” Essentially, it is a 3D printed kit that takes parts from a traditional AK AEG and turns into a super lightweight, compact, and easy to use weapon. Actually, to be more accurate, it only takes the gearbox, hop unit, and barrel. You don’t even need any of the fiddly external parts on the gearbox because I have completely redesigned them. It also takes regular mp5 magazines which are plentiful. So, what I need now are testers who will provide good feedback on the kit as it is right now. I have plans to improve it even further before putting it up commercially, but I will need user feedback first to determine viability. I will list some requirements here: £60 to cover material, packaging, and delivery costs. This is to improve the quality of the test. Think of it as buying a cheapo GBB pistol from JBBG on an impulse You will be required to write a detailed report. Don’t worry as I have templates of that. It will be in the form of google docs and will only be shared between you and me. You will have to source your own AK internals if you don’t own any. I have made a huge list of these for your convenience in the beta test document. Don’t worry about screws and fittings, I will supply them all. This is mainly an AEG platform. However, if you are a V3 HPA user, that is definitely welcome too. You will also need a discord account as this test will be held over at a discord server where the rest of the beta test information is, alongside full documentation of the entire process since last year. There will only be a maximum of 15 testers because I don’t think I can manage much more on my own. If you want to be involved, message me and I will send you a link to the discord server. It is on a first come, first served basis. Thanks for reading and here’s a fun video:
-
Na, from some cheapo lpeg from justbbguns or something. 3D printed one would probs be worse.
-
AEP gearbox? Gearboxes are bloody heavy so you'd prolly need a plastic one tbh. The best option is probably getting someone to design in CAD and 3D printing a custom frame and feeding system to the plane (hint hint, maybe pay me? :)))))))) Then again, that kind of thing might get you potentially arrested AHAHA
-
I'm conducting a beta test soon
Preview of the design:
-
- SeniorSpaz87, strykerles and Nick G
-
3
- Show previous comments 8 more
-
-
Ive spent far moe than youd want on my MPX build. Id be happy to cover whatever material/design costs youd need.
-
-
AS03 cylinder doesn't need to be replaced as it's already a one piece. But, it has a teardrop cut in it to reduce fps, so you have to patch it up with tape. After that, it can reach 2.3J no problem. The real issue is the bolt pull as it's really tough because it's short. I compared it to my friend's ssg24 and the difference in bolt pull strength require is insane. I'd say the cheapest sniper rifle setup that will perform is the AS03 knee capper with the action army chamber, longer barrel, and new hop rubber. I had it, and it worked quite well but the bolt pull wasn't fun for playing aggressively. If you mostly play staying still, it should be fine. I'd recommend SRS over it though.
-
Flak-10 and Flak-5 Super Shotguns by Airsoft Innovations
AK47frizzle replied to cropzy's topic in Guns, Gear & Loadouts
hmmmmm semi auto and 10 per shot. I can see that getting banned. I actually think what will get it banned is the use of m4 mags. If was pump action and 10 per shot, it would appeal more and get less... flak Design is extraordinarily ugly though. -
The cyma version is more popular and probably has more information about it
-
https://jdairsoft.net/kwc-airsoft-blackwater-bw1911-r2-16rd-co2-blowback-pistol-magazine Lots of places have them in stock. A very common pistol. -
Ye i'm mostly catching up with people to get their final reviews of the first test. The model the 2nd test is almost done, just need to refine the selector and allow compatibility with mp5 hi caps: https://gyazo.com/8b80fc4a99738cec16102413aa3fdb7f On the side, i'm working on a modern tec 9 to fit on an m4 (was originally an actual tec9 upper for an m4 as a commissioned piece but i'm decking it out more): https://gyazo.com/565d9a13529844461da1224237ad09ff
-
So uh, I made an interesting purchase today: https://www.justbbguns.co.uk/zg1-spring-pistol/?attribute_pa_colour=black
-
-
What's with this? Can't toggle notifications.
-
"I want a Tec9 upper for my arp9!" Here it is buddy, in carbon fibre too:
-
- Adolf Hamster and rj1986
-
1
-
1
- Show previous comments 2 more
-
i meant the material, i think onyx is what it was called, pa6 and short strand carbon afaik.
-
-
-
ha gaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaayyyyyyyyyyyyyyyyyyyyy 😆 -
Took the modded cz75 on sunday. Literally the best pistol ever I've used and competed with rifles on range and accuracy. The consistency with rapid firing is nuts. Much better than any glock or hicapa. The 3D printed bbu didn't break either after like 15 reloads.
-
I've made a 3d printed lightweight bbu for the cz75 and it's insane:
-
- strykerles, ziCk_ and Nick G
-
3
- Show previous comments 2 more
-
How much would it be for a bbu 3D printed. I don’t like buying standard stuff like to be different if you get my drift. Going on principle that my hi capa hasn’t let me down yet and all that is original all is lower frame and Guide rod and spring. Rest is 3D printed.
if you can/let me know I be happy to run it for you
chris
-
I don't think a hicapa one would work with traditional 3d printing and materials atm. The cz75 only works because all the slide needs to push back is the hammer and that resets everything. A glock and hicapa have several things that need to pushed back/down, but also the nozzle spring will be held by the 3d printed bbu which I suspect will fail easily. I will need to get into nylons or polycarbonate for that.
I don't think I will get into bbus for other guns for now, sorry.
-
-
The 'What have you just bought' Thread
AK47frizzle replied to Cameron364's topic in Guns, Gear & Loadouts
Single action trigger for cz75. Unfortunately the wii tech steel hamer won't work with it. -
You sure a v7 wouldn't fit inside it? The ares ppsh gearbox could potentially fit. Maybe an A&K SVD too. Or even the m249 style gearboxes.
-
What are some other cool small pistols? Might pick up an src tt33 as the we version sucked externally.
-
WE ct25 is so fucking fun. It can do 8 mags (56 shots, 58 most so far) on a complete gas fill. Time to make some mods for it
-
-
I get 30 shots if I just fill straight in.56 if I hold down the valve first, fill to vent out all the air out, and then immediately let go of the valve whilst still filling. And that's using 0.25s as well.
I've seen similar results from other people too. About 20-30 on a normal fill. But not many people know about releasing the air inside of it, or for green gas pistols in general. Only tm and the "new" ics revo do that automatically.
-
-
-
If anybody needs anything 3D printed in high quality or CAD designed, shoot me a dm (because I need your monies to finish a project)
- Show previous comments 2 more
-
fancy a crack at one of these? kind of a pain in the ass reloading without it.....
https://www.airsoftstation.com/e-l-magwell-spacer-for-gen-1-2-aks/
-
https://www.thingiverse.com/thing:3842498
https://www.thingiverse.com/thing:3842498
https://www.thingiverse.com/thing:3037315
There are these online if they suit you. Nothing specific for E&L that's commercial. I don't have an ak atm, so I can't just make that unfortunately. I can't find dimensions either.
-
-
how else can you embed pictures without using storage space?
-
anybody super well versed in the uk laws?
