Johndaniel4863 Posted July 24 Share Posted July 24 Finally managed to get a retro MP5 PDW stock to swap out all the modern hideousness on my Cyma CM041L so it's gone from this monstrosity to this classic but with the amazing range and rate of fire 😁 TheFull9, gavinkempsell and pyromancer6 3 Link to comment Share on other sites More sharing options...
pyromancer6 Posted July 24 Share Posted July 24 (edited) 32 minutes ago, Johndaniel4863 said: Finally managed to get a retro MP5 PDW stock to swap out all the modern hideousness on my Cyma CM041L so it's gone from this monstrosity to this classic but with the amazing range and rate of fire 😁 Please do tell where you found a classic style cocking lever - I've tried the guarder steel one [didn't fit] and the VFC one [was too big] and I'm completely at my wits end looking for one. It's to the point where I might even order the gopping modern styled one just to have one again (or, if you've still got it around, I'd be happy to take it off your hands for a few quid) I'm begging at this point. Looks awesome, by the way. Edited July 24 by pyromancer6 Link to comment Share on other sites More sharing options...
Johndaniel4863 Posted July 25 Share Posted July 25 I swapped the upper receiver with another MP5K I have and then swapped the muzzles. I still need to replace the modern charging handles on the other MP5K now and an MP5A4 that started off as the CM041H and all that is left modern on it is the charging handle. I am awaiting a reply from a store in France I got the PDW stock from if they have or can get any if they can I will get an extra one ordered for you Link to comment Share on other sites More sharing options...
gavinkempsell Posted July 25 Share Posted July 25 I'm usually a vanilla military spec type but this dayglow Beretta (ish) pistol took my fancy. Link to comment Share on other sites More sharing options...
Shamal Posted July 25 Share Posted July 25 2 minutes ago, gavinkempsell said: I'm usually a vanilla military spec type but this dayglow Beretta (ish) pistol took my fancy. Have you forgotten to take your grown up meds? 😂 Cannonfodder and gavinkempsell 2 Link to comment Share on other sites More sharing options...
gavinkempsell Posted July 25 Share Posted July 25 (edited) 2 minutes ago, Shamal said: Have you forgotten to take your grown up meds? 😂 Funnily enough I picked up my prescriptions after work. Edited July 25 by gavinkempsell Shamal 1 Link to comment Share on other sites More sharing options...
Shamal Posted July 25 Share Posted July 25 8 minutes ago, gavinkempsell said: Funnily enough I picked up my prescriptions after work. Pleased to hear it. Now all you have to do is take it back to 'toys r us' 👍 gavinkempsell 1 Link to comment Share on other sites More sharing options...
gavinkempsell Posted July 25 Share Posted July 25 I'm an old raver at heart. Lozart and Tackle 1 1 Link to comment Share on other sites More sharing options...
Shamal Posted July 25 Share Posted July 25 8 minutes ago, gavinkempsell said: I'm an old raver at heart. Haha. I'm just old lol Tackle and gavinkempsell 3 Link to comment Share on other sites More sharing options...
johnnyj Posted July 26 Share Posted July 26 Arrived this morning only to find the plug is 1mm too short ☹️ Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted July 26 Supporters Share Posted July 26 You'll have to just launch the entire gat right in to the sea at this point mate, sorry! johnnyj 1 Link to comment Share on other sites More sharing options...
johnnyj Posted July 26 Share Posted July 26 4 minutes ago, TheFull9 said: You'll have to just launch the entire gat right in to the sea at this point mate, sorry! Been one of them days and do feel like it , finished a night shift can't sleep over suspected busted ribs .. this arrives go to fit it .. so then decided fit some parts on another 1911 only for the slide lock block screw to cross thread and strip .. time to step away 😆 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted July 27 Share Posted July 27 (edited) Two and a half weeks for delivery from Brownells. An extra 3-4 hours with the dremel should see it fit a pew pew it’s not made for 😁 Edited July 27 by Enid_Puceflange Glynn and gavinkempsell 2 Link to comment Share on other sites More sharing options...
mightyjebus Posted July 27 Share Posted July 27 (edited) just has one of these turn and it's stupidly good for 20 quid. https://www.aliexpress.com/item/1005006119967193.html?spm=a2g0o.order_detail.order_detail_item.3.12f7f19crZ9A2w Edited July 27 by mightyjebus Enid_Puceflange, gavinkempsell and Shamal 3 Link to comment Share on other sites More sharing options...
lekne Posted July 27 Share Posted July 27 Courtesy of lct . Early bday gavinkempsell and Shamal 2 Link to comment Share on other sites More sharing options...
GothicGhost Posted July 30 Share Posted July 30 New handguard to start my MWS PDW build 😁 It's really nice quality and comes with different outer barrel lengths plus the nice gas block. gavinkempsell, MorganL and pyromancer6 3 Link to comment Share on other sites More sharing options...
MorganL Posted July 31 Share Posted July 31 Bit of a splurge this week :). Airtac MWS HPA adapter Airtac Mag catch in black Airtac AT200 Tank, reg and line kit PTS EPM1-S x 3 Vortex spitfire hd gen ii Army armament R604 15 hours ago, GothicGhost said: New handguard to start my MWS PDW build 😁 It's really nice quality and comes with different outer barrel lengths plus the nice gas block. Where did you get the gas block from I need one for my MWS block 1. Link to comment Share on other sites More sharing options...
GothicGhost Posted July 31 Share Posted July 31 6 hours ago, MorganL said: Bit of a splurge this week :). Airtac MWS HPA adapter Airtac Mag catch in black Airtac AT200 Tank, reg and line kit PTS EPM1-S x 3 Vortex spitfire hd gen ii Army armament R604 Where did you get the gas block from I need one for my MWS block 1. The gas block came as part of the handguard kit, but I found them for sale separately for you. ☺️ https://shop.jkarmy.com/slr-dummy-gas-block-0-75-for-airsoft-melonite-qpq-black-silver.html Link to comment Share on other sites More sharing options...
MorganL Posted August 1 Share Posted August 1 11 hours ago, GothicGhost said: The gas block came as part of the handguard kit, but I found them for sale separately for you. ☺️ https://shop.jkarmy.com/slr-dummy-gas-block-0-75-for-airsoft-melonite-qpq-black-silver.html Awesome thank you. GothicGhost 1 Link to comment Share on other sites More sharing options...
Popular Post JinxDuh Posted August 1 Popular Post Share Posted August 1 Headed to a reenactment event last weekend and picked up an original fibreglass heat shield for an M14 (Been looking for one, for years) but sadly no M14 as I broke the Cyma one trying to upgrade it (Oops… may make an appearance as a boneyard project soon 😂) Popped into my local shop yesterday and was informed the G&G M14 could be acquired with some magazines (Regretted selling my veteran but couldn’t get mags at the time) - Collected it from them today and it’s so beautiful 😍 Sadly plastic stock but it doesn’t feel that bad. Cocha, pyromancer6, Lozart and 2 others 1 4 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted August 1 Supporters Share Posted August 1 36 minutes ago, JinxDuh said: Headed to a reenactment event last weekend and picked up an original fibreglass heat shield for an M14 (Been looking for one, for years) but sadly no M14 as I broke the Cyma one trying to upgrade it (Oops… may make an appearance as a boneyard project soon 😂) Popped into my local shop yesterday and was informed the G&G M14 could be acquired with some magazines (Regretted selling my veteran but couldn’t get mags at the time) - Collected it from them today and it’s so beautiful 😍 Sadly plastic stock but it doesn’t feel that bad. Nice. M14 for the win. Tackle and JinxDuh 2 Link to comment Share on other sites More sharing options...
Ian Bru Posted August 2 Share Posted August 2 (edited) A WADSN V600 flashlight in dark earth. Edited August 2 by Ian Bru gavinkempsell 1 Link to comment Share on other sites More sharing options...
gavinkempsell Posted August 2 Share Posted August 2 A wee addition to my sniper/spr/dmr collection. TheFull9, Ian Bru, JinxDuh and 1 other 1 3 Link to comment Share on other sites More sharing options...
gavinkempsell Posted August 2 Share Posted August 2 (edited) Long story long... Bought my L85A3 from Extremeairsoft back in Nov/Dec 2022 & within a couple of dozen shots the charging handle fell off (a typical fault apparently), when I went to repair it I noticed a burst thread on one of the dissassembly screws so I summised it was a returned pew then sold to me as new. after emailing extremeairsoft I got zero replies & thought... fuck. determined to fix it I ordered a charging handle set which I 'hoped' would fit (it didn't), earlier this year I ordered a different one (didn't fit), finally emailed Ares direct and ordered the correct one... it came today & WOOHOO, it fits. For those that need one, this cost £20.10 inc postage from Hong Kong, parts numbers... FC-M3x8 and the UB-478 Edited August 3 by gavinkempsell Link to comment Share on other sites More sharing options...
Popular Post BigStew Posted August 2 Popular Post Share Posted August 2 Other than the 3 hour drive home due to road works I am a very happy boy! Egon_247, Enid_Puceflange, gavinkempsell and 2 others 4 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now