Jump to content

The 'What have you just bought' Thread


Cameron364

Recommended Posts

14 hours ago, Cocha said:

Bought a bare bones Magpul PTS Masada for a super fair price, always loved it.


What I love about FDE guns is how nothing is ever the same colour. My VFC Scar-H is the same. Even the bare bones parts are different colours, never mind the accessories.

Link to comment
Share on other sites

5KU 10 inch MWS outer barrel

Guarder Rubber Stock Pad

 

The project continues - HAO buffer tube and castle nut will be the next purchases

On 26/10/2024 at 22:22, Danno46 said:

Be interested to see some photos 

I'll get some when I have better lighting - everything just arrived today but happy with everything.

 

The stocks need the spring and ping from a donor stock. Little bit of filing requiried to get the pin from a TM MWS M4A1 stock to fit properly in the holes.

 

Worth noting also that the Front sight requires a Front sight post so I'm going to have to salvage one from somewhere - but I might just sell it and the barrel extension on and stick to a 10 inch version.
 

Link to comment
Share on other sites

1 hour ago, Speedbird_666 said:

Alright - let's see what all the fuss is about...

 

 

Ok - I get it now.

 

Slapped into one of my guns (ICS M4, Stock 18:1 gears, Perun Hybrid with AB disabled). No modifications needed - straight drop-in.

 

Impressive. Most Impressive.

 

Been spamming the trigger fairly hard on an 11.1v for giggles and the motor is cold, as is the wiring and the battery. Performance on 7.4 and 11.1 is fairly similar in Semi.

 

Can't comment on long term reliability (obvs), but as a drop-in upgrade for a bone stock gun, it certainly seems to give a trigger responsiveness and ROF performance that will keep 95% of players very happy.

 

 

Link to comment
Share on other sites

5 minutes ago, Speedbird_666 said:

Been spamming the trigger fairly hard on an 11.1v for giggles and the motor is cold, as is the wiring and the battery. Performance on 7.4 and 11.1 is fairly similar in Semi.

 

Regarding battery it's great when you suddenly find that your battery lasts twice as long as it did on a full charge. Also, as the torque is so incredible, you then start to think about lower gear ratios and just using 7.4v!

Link to comment
Share on other sites

21 minutes ago, Fatboy40 said:

 

Regarding battery it's great when you suddenly find that your battery lasts twice as long as it did on a full charge. Also, as the torque is so incredible, you then start to think about lower gear ratios and just using 7.4v!

 

Yes - I think 7.4v with a change of gear ratios is probably a good way to go.

 

Link to comment
Share on other sites

DE Noveske N4 in FDE , 'cos the wife insisted I have a new gun for Chrismas 😁 

 

It arrived today, but after a quick check over it was whisked away and wrapped , so got to wait now !

 

Still , that gives me time to collect a few bits for it , M/L barrel etc

Edited by Nick G
Link to comment
Share on other sites

14 hours ago, Nick G said:

DE Noveske N4 in FDE , 'cos the wife insisted I have a new gun for Chrismas 😁 

 

It arrived today, but after a quick check over it was whisked away and wrapped , so got to wait now !

 

Still , that gives me time to collect a few bits for it , M/L barrel etc

 

250mm for the inner barrel right up to the end of the outer.

GM 3.5 nozzle, but take the seal off the back of the stock nozzle (GM rear seal isn't compatible with DE BCG) for being able to fit an NPAS - NPAS doesn't fit in stock DE nozzle.

Jaeger or FEDA for NPAS - former is easier to get hold of in the UK, latter has some QC issues as of late.

Bavtac/Jaeger nubs aren't compatible with DE hop arm, unless you want to overhop .48's with no hop applied ofc.

MR hop rubbers contact patch get eaten by the nozzle on both stock and GM, so something flamingo or similar (which is a bugger as flamingo are flimsy).

 

Did it have a black or silver BCG? If its black (V2), the mags are good, if its silver (V1) you'll want to get something else.

 

Edited by GiantKiwi
Link to comment
Share on other sites

7 hours ago, GiantKiwi said:

 

250mm for the inner barrel right up to the end of the outer.

GM 3.5 nozzle, but take the seal off the back of the stock nozzle (GM rear seal isn't compatible with DE BCG) for being able to fit an NPAS - NPAS doesn't fit in stock DE nozzle.

Jaeger or FEDA for NPAS - former is easier to get hold of in the UK, latter has some QC issues as of late.

Bavtac/Jaeger nubs aren't compatible with DE hop arm, unless you want to overhop .48's with no hop applied ofc.

MR hop rubbers contact patch get eaten by the nozzle on both stock and GM, so something flamingo or similar (which is a bugger as flamingo are flimsy).

 

Did it have a black or silver BCG? If its black (V2), the mags are good, if its silver (V1) you'll want to get something else.

 

Thanks for that. I'll digest it and order some goodies. Bolt was from memory black so V2 

I have a couple of Lancer mags on the way to top me up to start with.

 

Shame that M/L rubbers don't work as they are my usual goto for my GBBRs. Flamingo it is !

Link to comment
Share on other sites

Balystik tank, regulator, line and valve to fit my GE shotgun. Now I just have to find somewhere local who can fill it, incase sites are unable to

Link to comment
Share on other sites

15 minutes ago, Cannonfodder said:

Balystik tank, regulator, line and valve to fit my GE shotgun. Now I just have to find somewhere local who can fill it, incase sites are unable to

There's someone at my usual site that runs a generator/compressor for his HPA, noisy as hell but might be worth a consideration?

Link to comment
Share on other sites

53 minutes ago, ButcherBill said:

There's someone at my usual site that runs a generator/compressor for his HPA, noisy as hell but might be worth a consideration?

Thanks but Hertfordshire to Scotland is a bit too much of a commute😁

 

I know most sites can fill them but I know a few can't so I just want other options

Link to comment
Share on other sites

21 minutes ago, Cannonfodder said:

Thanks but Hertfordshire to Scotland is a bit too much of a commute

We have cleaner air up here tho... well maybe not considering the proximity to Grangemouth petrochemical site.

 

*cough*

Link to comment
Share on other sites

1x Begadi Neptun M4 hop unit,

1x Begadi MHP5 in 60°

1x Begadi SHP5 in 60°

1x Begadi M150 spring

 

ordered on Tuesday, delivered 10 minutes ago.

Hopefully these will sort my brushless DSG's power, feeding and range/consistency.

 

This way I can also start fucking off Maxx units from my guns :P

 

Also, from skirmshop:

1x Stalker Morpheus Carbon 155x6.05 (this one should've been 3mm longer to match my current chopped barrel, but I reckon it's going to be fine)

1x Stalker Morpheus Carbon 185x6.05

1x Stalker 60° R-Hop patch

Link to comment
Share on other sites

1 minute ago, Skara said:

1x Begadi Neptun M4 hop unit,

1x Begadi MHP5 in 60°

1x Begadi SHP5 in 60°

1x Begadi M150 spring

 

ordered on Tuesday, delivered 10 minutes ago.

Hopefully these will sort my brushless DSG's power, feeding and range/consistency.

 

This way I can also start fucking off Maxx units from my guns :P

 

Also, from skirmshop:

1x Stalker Morpheus Carbon 155x6.05 (this one should've been 3mm longer to match my current chopped barrel, but I reckon it's going to be fine)

1x Stalker Morpheus Carbon 185x6.05

1x Stalker 60° R-Hop patch

Will be interested to see how you find these compared to the Maple leaf offerings. 

Link to comment
Share on other sites

On 12/11/2024 at 15:38, Speedbird_666 said:

Alright - let's see what all the fuss is about...

image.png.798caa22a44ea671ceee17806def5e00.png

 

Where did you buy it?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...