The 'What have you just bought' Thread

[Johndaniel4863]

I swapped the upper receiver with another MP5K I have and then swapped the muzzles. I still need to replace the modern charging handles on the other MP5K now and an MP5A4 that started off as the CM041H and all that is left modern on it is the charging handle. I am awaiting a reply from a store in France I got the PDW stock from if they have or can get any if they can I will get an extra one ordered for you

[gavinkempsell]

I'm usually a vanilla military spec type but this dayglow Beretta (ish) pistol took my fancy.

[Shamal]

2 minutes ago, gavinkempsell said:

I'm usually a vanilla military spec type but this dayglow Beretta (ish) pistol took my fancy.

Have you forgotten to take your grown up meds? ?

[gavinkempsell]

2 minutes ago, Shamal said:

Have you forgotten to take your grown up meds? ?

Funnily enough I picked up my prescriptions after work.

Edited July 25, 2024 by gavinkempsell

[Shamal]

8 minutes ago, gavinkempsell said:

Funnily enough I picked up my prescriptions after work.

Pleased to hear it. Now all you have to do is take it back to 'toys r us' ?

[gavinkempsell]

I'm an old raver at heart.

[Shamal]

8 minutes ago, gavinkempsell said:

I'm an old raver at heart.

Haha. I'm just old lol

[johnnyj]

Arrived this morning only to find the plug is 1mm too short ☹️

[TheFull9]

You'll have to just launch the entire gat right in to the sea at this point mate, sorry!

[johnnyj]

4 minutes ago, TheFull9 said:

You'll have to just launch the entire gat right in to the sea at this point mate, sorry!

Been one of them days and do feel like it , finished a night shift can't sleep over suspected busted ribs .. this arrives go to fit it .. so then decided fit some parts on another 1911 only for the slide lock block screw to cross thread and strip .. time to step away ? 

[Enid_Puceflange]

Two and a half weeks for delivery from Brownells. 
An extra 3-4 hours with the dremel should see it fit a pew pew it’s not made for ?

 

 

Edited July 27, 2024 by Enid_Puceflange

[mightyjebus]

just has one of these turn and it's stupidly good for 20 quid. 

https://www.aliexpress.com/item/1005006119967193.html?spm=a2g0o.order_detail.order_detail_item.3.12f7f19crZ9A2w

 

 

Edited July 27, 2024 by mightyjebus

[lekne]

Courtesy of lct . Early bday  

[GothicGhost]

New handguard to start my MWS PDW build ?

It's really nice quality and comes with different outer barrel lengths plus the nice gas block.

 

[MorganL]

Bit of a splurge this week :). 

 

Airtac MWS HPA adapter 

Airtac Mag catch in black 

Airtac AT200 Tank, reg and line kit 

PTS EPM1-S x 3

Vortex spitfire hd gen ii

Army armament R604

 

 

 

 

15 hours ago, GothicGhost said:

New handguard to start my MWS PDW build ?

It's really nice quality and comes with different outer barrel lengths plus the nice gas block.

 

 

Where did you get the gas block from I need one for my MWS block 1. 

[GothicGhost]

6 hours ago, MorganL said:

Bit of a splurge this week :). 

 

Airtac MWS HPA adapter 

Airtac Mag catch in black 

Airtac AT200 Tank, reg and line kit 

PTS EPM1-S x 3

Vortex spitfire hd gen ii

Army armament R604

 

 

 

 

Where did you get the gas block from I need one for my MWS block 1. 

The gas block came as part of the handguard kit, but I found them for sale separately for you. ☺️

 

https://shop.jkarmy.com/slr-dummy-gas-block-0-75-for-airsoft-melonite-qpq-black-silver.html

 

[MorganL]

11 hours ago, GothicGhost said:

The gas block came as part of the handguard kit, but I found them for sale separately for you. ☺️

 

https://shop.jkarmy.com/slr-dummy-gas-block-0-75-for-airsoft-melonite-qpq-black-silver.html

 

Awesome thank you.

 

 

 

[Guest JinxDuh]

 Headed to a reenactment event last weekend and picked up an original fibreglass heat shield for an M14 (Been looking for one, for years) but sadly no M14 as I broke the Cyma one trying to upgrade it (Oops… may make an appearance as a boneyard project soon ?)

 

Popped into my local shop yesterday and was informed the G&G M14 could be acquired with some magazines (Regretted selling my veteran but couldn’t get mags at the time) - Collected it from them today and it’s so beautiful ? Sadly plastic stock but it doesn’t feel that bad.

[Lozart]

36 minutes ago, JinxDuh said:

 Headed to a reenactment event last weekend and picked up an original fibreglass heat shield for an M14 (Been looking for one, for years) but sadly no M14 as I broke the Cyma one trying to upgrade it (Oops… may make an appearance as a boneyard project soon ?)

 

Popped into my local shop yesterday and was informed the G&G M14 could be acquired with some magazines (Regretted selling my veteran but couldn’t get mags at the time) - Collected it from them today and it’s so beautiful ? Sadly plastic stock but it doesn’t feel that bad.

 

 

Nice. M14 for the win.

[Ian Bru]

A WADSN V600 flashlight in dark earth.

 

 

Edited August 2, 2024 by Ian Bru

[gavinkempsell]

A wee addition to my sniper/spr/dmr collection.

[gavinkempsell]

Long story long...

 

Bought my L85A3 from Extremeairsoft back in Nov/Dec 2022 & within a couple of dozen shots the charging handle fell off (a typical fault apparently), when I went to repair it I noticed a burst thread on one of the dissassembly screws so I summised it was a returned pew then sold to me as new. after emailing extremeairsoft I got zero replies & thought... fuck. determined to fix it I ordered a charging handle set which I 'hoped' would fit (it didn't), earlier this year I ordered a different one (didn't fit), finally emailed Ares direct and ordered the correct one... it came today & WOOHOO, it fits.

 

For those that need one, this cost £20.10 inc postage from Hong Kong, parts numbers... FC-M3x8 and the UB-478

Edited August 3, 2024 by gavinkempsell

[BigStew]

Other than the 3 hour drive home due to road works I am a very happy boy!

[Impulse]

I don't usually like getting metal slides for my TM pistols because I love how efficient the plastic slides are... but my hi-capa slide snapped at the front when the front sight was ripped out by some very determined brambles that I was wading through (the bottom part of the Worthing Airsoft site is basically unplayable at the moment...)

 

So my hi-capa now has a metal slide. Surprisingly snappy still on green gas at room temperature thanks to the lightweight blowback unit and probably feels the best to shoot due to the fact it's still snappy but the metal slide has some weight to it; might get a bigger recoil spring, but we'll see. Will be running it on propane anyway, so here's hoping it'll be fine in the winter too.

 

[pyromancer6]

5 minutes ago, Impulse said:

I don't usually like getting metal slides for my TM pistols because I love how efficient the plastic slides are... but my hi-capa slide snapped at the front when the front sight was ripped out by some very determined brambles that I was wading through (the bottom part of the Worthing Airsoft site is basically unplayable at the moment...)

 

So my hi-capa now has a metal slide. Surprisingly snappy still on green gas at room temperature thanks to the lightweight blowback unit and probably feels the best to shoot due to the fact it's still snappy but the metal slide has some weight to it; might get a bigger recoil spring, but we'll see. Will be running it on propane anyway, so here's hoping it'll be fine in the winter too.

 

Not normally a fan of 2011s to be honest but this one has tickled my fancy - any clue where you got that supressor from? Looks ace