kasaran Posted March 4, 2021 Share Posted March 4, 2021 9 hours ago, Asomodai said: I was weak... LCT TKMS (Tactical AKMS, will likely replace with a wood kit though). For £212 quid @ DutyCallsAirsoft Fabarms STF12 Tan Compact spring shotgun for just under 60 quid. Damn yeah.. how much are the wood kits though? Link to comment Share on other sites More sharing options...
Asomodai Posted March 5, 2021 Share Posted March 5, 2021 4 hours ago, kasaran said: Damn yeah.. how much are the wood kits though? Wgc have them for about 60 quid. That includes the handguard and the pistol grip. Link to comment Share on other sites More sharing options...
kasaran Posted March 5, 2021 Share Posted March 5, 2021 7 hours ago, Asomodai said: Wgc have them for about 60 quid. That includes the handguard and the pistol grip. my emotions are mixed, and my bank account a little lighter.... Edit: just had an email saying its out of stock, you got the last one maybe? i always seem to miss the good deals. Link to comment Share on other sites More sharing options...
DerDer Posted March 5, 2021 Share Posted March 5, 2021 3 hours ago, kasaran said: my emotions are mixed, and my bank account a little lighter.... Edit: just had an email saying its out of stock, you got the last one maybe? i always seem to miss the good deals. If you're handy with a file or dremel, you can mod a surplus handgrip to fit fairly easily. Link to comment Share on other sites More sharing options...
Misery Posted March 5, 2021 Share Posted March 5, 2021 14 hours ago, Sitting Duck said: issue if the nozzle is tooooooo long, then even on full retraction there isn't say nearly 7mm in font of nozzle in hop unit to chamber/allow a bb to slip/pass & into bucking if the nozzle is tooooooooo short it feeds better, but shorter nozzle never quite seals on bucking resulting in fps loss as lips blow from lighter sealing pressure it will probably be fine with a small tiny tolerance - you get a bit of give n take if you get feed issues then you may have to fit delay clip or file nozzle lightly you might be OK on semi or slower speeds, on faster snappier guns feed issues can occur more sometimes you got a bit of leeway & others you have finer tolerance or tappet/nozzle window (don't worry about it - I over think shit way way way too much) give it a go and suck it & see as the saying goes, you'll probably be OK if not start a new thread for more of your toy gun headaches luckily this one is the exact same measurments as the cyma one rechecked with calipers calibrated this time when it arrived yesterday so should have no issues emphasise on the should with how haunted that gun is you never know lol Link to comment Share on other sites More sharing options...
Skara Posted March 5, 2021 Share Posted March 5, 2021 One EPG-C in FDE for my 933 One EPG-C in black for my other Specna Emperion as always being top notch Link to comment Share on other sites More sharing options...
Asomodai Posted March 5, 2021 Share Posted March 5, 2021 Second attempt at getting a 410mm Crazy Jet barrel for my SRS 😕 Link to comment Share on other sites More sharing options...
Speedbird_666 Posted March 5, 2021 Share Posted March 5, 2021 New ICS tubular hand guard for my ICS Peleador. I think I'm going with a civilian 3-gun-esque look with this one - need to add either a T1 style red dot on a riser or a short dot scope. Skara 1 Link to comment Share on other sites More sharing options...
Guest Mr. No_Face Posted March 5, 2021 Share Posted March 5, 2021 UF PRO Striker XT Gen.2 Multi Cam Black arrived today. Pretty expensive combat shirt but well worth it since the material is comparable to my actual field and deployment gear. Now for some custom patches.💀🤙 Link to comment Share on other sites More sharing options...
Asomodai Posted March 5, 2021 Share Posted March 5, 2021 12 hours ago, kasaran said: my emotions are mixed, and my bank account a little lighter.... Edit: just had an email saying its out of stock, you got the last one maybe? i always seem to miss the good deals. I just ordered. I didn't want the aged look which is out of stock. I went for the new looking set. Hopefully it is in stock. MOAR THINGS ORDERED. LCT AKMS Handguard set. Action Army T10 Twisted Outer Barrel (Short) Action Army CNC VSR-10 Right Hand Tactical Up- Reciever Action Army VSR-10 Hop up Double Bell Lightweight PK-6 ForeGrip Action Army Inner Barrel Spacer GSpec 5KU PK-1 Fore Grip Link to comment Share on other sites More sharing options...
kasaran Posted March 5, 2021 Share Posted March 5, 2021 9 minutes ago, Asomodai said: I just ordered. I didn't want the aged look which is out of stock. I went for the new looking set. Hopefully it is in stock. MOAR THINGS ORDERED. LCT AKMS Handguard set. Action Army T10 Twisted Outer Barrel (Short) Action Army CNC VSR-10 Right Hand Tactical Up- Reciever Action Army VSR-10 Hop up Double Bell Lightweight PK-6 ForeGrip Action Army Inner Barrel Spacer GSpec 5KU PK-1 Fore Grip found the wooden one for 299 due instock next week, so resigned myself to that one, probably would add up to the same amount. £200 for an lct is very good value these days Link to comment Share on other sites More sharing options...
Asomodai Posted March 5, 2021 Share Posted March 5, 2021 4 minutes ago, kasaran said: found the wooden one for 299 due instock next week, so resigned myself to that one, probably would add up to the same amount. £200 for an lct is very good value these days Wait, do you mean you ordered the rifle or the wooden handguard kit? I thought you meant the Wood Kit! Edit: There is always the Tactical AKS74U LCT TXS74UN-AEG – Duty Calls Airsoft Link to comment Share on other sites More sharing options...
kasaran Posted March 5, 2021 Share Posted March 5, 2021 41 minutes ago, Asomodai said: Wait, do you mean you ordered the rifle or the wooden handguard kit? I thought you meant the Wood Kit! Edit: There is always the Tactical AKS74U LCT TXS74UN-AEG – Duty Calls Airsoft I ordered the rif this morning. And a couple hours later got a message saying the websites wrong and would i want a refund unless something else interests me. Went for refund. If you havent been messaged by them i assume you got the last one? They were quick to message and send my monies back. So not mad at them. Just mildly disappointed to have missed what would have been a steal. I already have a ak74u. Im in the market for an akm.... found one site selling the lct and e&l for the same price... whats better Link to comment Share on other sites More sharing options...
Asomodai Posted March 5, 2021 Share Posted March 5, 2021 4 minutes ago, kasaran said: I ordered the rif this morning. And a couple hours later got a message saying the websites wrong and would i want a refund unless something else interests me. Went for refund. If you havent been messaged by them i assume you got the last one? They were quick to message and send my monies back. So not mad at them. Just mildly disappointed to have missed what would have been a steal. I already have a ak74u. Im in the market for an akm.... found one site selling the lct and e&l for the same price... whats better Ahh! Cool. Mine has been fulfilled. I am pretty sure they only had one. I get the feeling its a one man band. E&L has better Blued steel externals and internals (Neo Motor, better bushings and a Tappet Plate that is correctly shaped). However the fit and finish is a little sloppy compared to the LCT. If you dont mind a bit of fettling, go for the E&L. Otherwise the LCT will be fine with a motor and bucking upgrade. Link to comment Share on other sites More sharing options...
Speedbird_666 Posted March 5, 2021 Share Posted March 5, 2021 6 minutes ago, Asomodai said: E&L has better Blued steel externals and internals (Neo Motor, better bushings and a Tappet Plate that is correctly shaped). However the fit and finish is a little sloppy compared to the LCT. If you dont mind a bit of fettling, go for the E&L. Otherwise the LCT will be fine with a motor and bucking upgrade. I've just got an E&L which came with a wobbly railed hand guard. I had to use washers to shim it out. The rest of the gun is lovely though. Link to comment Share on other sites More sharing options...
Asomodai Posted March 5, 2021 Share Posted March 5, 2021 29 minutes ago, Speedbird_666 said: I've just got an E&L which came with a wobbly railed hand guard. I had to use washers to shim it out. The rest of the gun is lovely though. Most of my E&Ls have slightly cockeyed iron sights. Had to straighten those out. Link to comment Share on other sites More sharing options...
Speedbird_666 Posted March 5, 2021 Share Posted March 5, 2021 10 minutes ago, Asomodai said: Most of my E&Ls have slightly cockeyed iron sights. Had to straighten those out. Interesting - not an issue I've noticed with mine, but the gun is '104/105 based so the front sight is on the gas block? The finish of the body is too good IMO. I though most modern AKs are painted rather than blued from the many factories since the '70s. I want to paint it to make it more tacticool, but it's just too pretty to Krylon. Now, if anyone can tell me where I can lay my hands on a compatible (will LCT fit?) enhanced selector switch (with the extra finger ledge) I would be eternally grateful. Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted March 5, 2021 Supporters Share Posted March 5, 2021 1 hour ago, kasaran said: I already have a ak74u. Im in the market for an akm.... found one site selling the lct and e&l for the same price... whats better E&l every day of the week: Link to comment Share on other sites More sharing options...
Asomodai Posted March 5, 2021 Share Posted March 5, 2021 28 minutes ago, Speedbird_666 said: Interesting - not an issue I've noticed with mine, but the gun is '104/105 based so the front sight is on the gas block? Now, if anyone can tell me where I can lay my hands on a compatible (will LCT fit?) enhanced selector switch (with the extra finger ledge) I would be eternally grateful. Indeed, the full length AK Front sights are pinned in. I have had to round out the flange with a dremel and tap for a screw much like the Cymas to get it straight. Pretty sure all enhanced selectors fit the E&L. I could only ever find them on the Continent or in Asia though. Speedbird_666 1 Link to comment Share on other sites More sharing options...
kasaran Posted March 5, 2021 Share Posted March 5, 2021 39 minutes ago, Adolf Hamster said: E&l every day of the week: I remember reading that thread at the time and wondering if you got a lemon? my LCT RPK and G3 are solid. Dont want to go for a cyma on this one as the under folding stock needs to definately be stronger than i think their steel will be. Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted March 5, 2021 Supporters Share Posted March 5, 2021 Just now, kasaran said: I remember reading that thread at the time and wondering if you got a lemon? my LCT RPK and G3 are solid. Dont want to go for a cyma on this one as the under folding stock needs to definately be stronger than i think their steel will be. the internals certainly, but the externals are more of a design choice thing. maybe it's once burned twice shy but if there was an e&l variant of a gun i wouldn't even consider lct. granted lct do make some stuff that e&l don't. Link to comment Share on other sites More sharing options...
Supporters Lozart Posted March 6, 2021 Supporters Share Posted March 6, 2021 3 hours ago, Speedbird_666 said: Interesting - not an issue I've noticed with mine, but the gun is '104/105 based so the front sight is on the gas block? The finish of the body is too good IMO. I though most modern AKs are painted rather than blued from the many factories since the '70s. I want to paint it to make it more tacticool, but it's just too pretty to Krylon. Now, if anyone can tell me where I can lay my hands on a compatible (will LCT fit?) enhanced selector switch (with the extra finger ledge) I would be eternally grateful. Let me have a look in my spares box. I may have one i don't need. Speedbird_666 1 Link to comment Share on other sites More sharing options...
Speedbird_666 Posted March 6, 2021 Share Posted March 6, 2021 5 hours ago, Lozart said: Let me have a look in my spares box. I may have one i don't need. Thanks @Lozart, if you do find one I’ll gladly buy it from you. Lozart 1 Link to comment Share on other sites More sharing options...
HuttArmouries Posted March 6, 2021 Share Posted March 6, 2021 Raptor mp443 grach and some spare mags. seems I managed to pick it up at just the right time. taiwangun had them in stock for about 2 weeks and then they removed them from the site. no idea why but mine is currently stuck in poland due to brexit stuff. Link to comment Share on other sites More sharing options...
Popular Post Wo1f Posted March 7, 2021 Popular Post Share Posted March 7, 2021 New toy.. Alimcd, GeorgePlaysAirsoft, rj1986 and 4 others 1 6 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now