mightyjebus Posted February 28, 2016 Share Posted February 28, 2016 TM G18C TM G26 plus 2 mags XC1 torch X300 torch Multicam Maritime Helmet Leopold ICO RDS 2 barrel extensions ris rail sling thing MP5 solid stock MK18 straight mount for aimpoint 2 x MNP9 mags 2 x USPc mags and a few other bits cropzy and Monty 2 Link to comment Share on other sites More sharing options...
Aengus Posted February 28, 2016 Share Posted February 28, 2016 TM G18C TM G26 plus 2 mags XC1 torch X300 torch Multicam Maritime Helmet Leopold ICO RDS 2 barrel extensions ris rail sling thing MP5 solid stock MK18 straight mount for aimpoint 2 x MNP9 mags 2 x USPc mags and a few other bits Is 1000 guns not enough? mightyjebus 1 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted February 28, 2016 Supporters Share Posted February 28, 2016 I plan to run the fast helmet with a set of Dye i4's, I'm putting 4 X 1" holes along the top each side of centre to allow me some cooling and a bunch of 2mm holes along the front to allow the mask to vent (hopefully) The holes in the top might work, but the ones along the front will most likely be blocked by the impact liner. Link to comment Share on other sites More sharing options...
Jay85 Posted February 28, 2016 Share Posted February 28, 2016 The holes in the top might work, but the ones along the front will most likely be blocked by the impact liner. You mean the padding? Link to comment Share on other sites More sharing options...
Supporters Lozart Posted February 29, 2016 Supporters Share Posted February 29, 2016 You mean the padding? Yes. Link to comment Share on other sites More sharing options...
Jay85 Posted February 29, 2016 Share Posted February 29, 2016 Yes. You have to remove the front padding to get the helmet and i4's to fit, so no problem there 😊 Link to comment Share on other sites More sharing options...
mightyjebus Posted February 29, 2016 Share Posted February 29, 2016 Is 1000 guns not enough? well you see 1000 guns equals 10,000 accessories Aengus 1 Link to comment Share on other sites More sharing options...
cropzy Posted March 1, 2016 Share Posted March 1, 2016 My baby arrived. Monty and Sacarathe 2 Link to comment Share on other sites More sharing options...
Bencupra Posted March 1, 2016 Share Posted March 1, 2016 My baby arrived. I've gotta get one of them soon. Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted March 2, 2016 Supporters Share Posted March 2, 2016 Got these Hexmags from LWA. tested 3 in my P* to see how they perform, i have to say i'm really impressed they pushed .3s out with absolutely no issues at all and with their follower design it fed every single BB. Slightly disappointed by how LWA packed them for sending they could have been easily damaged. Randymanpipe, CES_williamson and Barny 3 Link to comment Share on other sites More sharing options...
Sacarathe Posted March 2, 2016 Share Posted March 2, 2016 My baby arrived. Where was it in stock, is that the multishot? Link to comment Share on other sites More sharing options...
Sacarathe Posted March 2, 2016 Share Posted March 2, 2016 Got these Hexmags from LWA. tested 3 in my P* to see how they perform, i have to say i'm really impressed they pushed .3s out with absolutely no issues at all and with their follower design it fed every single BB. Slightly disappointed by how LWA packed them for sending they could have been easily damaged. I believe they're purportedly as durable as the real steel ones... I have one, and I like it, though when dropped onto concrete it lost half it's BBs. Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted March 2, 2016 Supporters Share Posted March 2, 2016 Where was it in stock, is that the multishot? JD Airsoft i believe is the place to get those from. I believe they're purportedly as durable as the real steel ones... I have one, and I like it, though when dropped onto concrete it lost half it's BBs. I hope so. i really do like them, after seeing my mates i had to buy some for myself and i'm certainly not disappointed Link to comment Share on other sites More sharing options...
Sacarathe Posted March 2, 2016 Share Posted March 2, 2016 I hope so. i really do like them, after seeing my mates i had to buy some for myself and i'm certainly not disappointed It was my first magazine, though costly, I love using it, I'm just not keen on the black, or i'd have bought more. Waiting for OD to become available here - not that I have an OD gun. :S Did you buy any alternate hex/follower colours? Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted March 2, 2016 Supporters Share Posted March 2, 2016 It was my first magazine, though costly, I love using it, I'm just not keen on the black, or i'd have bought more. Waiting for OD to become available here - not that I have an OD gun. :S Did you buy any alternate hex/follower colours? they're available in tan as well aren't they but always seem to be out of stock. I certainly did purchased some red followers for them but kinda wishing i'd bought another colour as red is a popular follower colour replacement Link to comment Share on other sites More sharing options...
Sacarathe Posted March 2, 2016 Share Posted March 2, 2016 they're available in tan as well aren't they but always seem to be out of stock. I certainly did purchased some red followers for them but kinda wishing i'd bought another colour as red is a popular follower colour replacement At least the bottom comes apart easily, so you can mark+number yours internally with a craft knife without compromise to external appearance. Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted March 2, 2016 Supporters Share Posted March 2, 2016 At least the bottom comes apart easily, so you can mark+number yours internally with a craft knife without compromise to external appearance. That’s very true the bottom does come off really easy doesn’t it. I expected that the orange hex marker under the base plate would be a pain to get off but it just clicks right out. Link to comment Share on other sites More sharing options...
cropzy Posted March 2, 2016 Share Posted March 2, 2016 Where was it in stock, is that the multishot? JD airsoft, no I want the option of 12 gauge and magflash's, I am going to get the multishot base though. If you don't know what mag flashes are take a look: Bencupra 1 Link to comment Share on other sites More sharing options...
cropzy Posted March 2, 2016 Share Posted March 2, 2016 Got these Hexmags from LWA. tested 3 in my P* to see how they perform, i have to say i'm really impressed they pushed .3s out with absolutely no issues at all and with their follower design it fed every single BB. Slightly disappointed by how LWA packed them for sending they could have been easily damaged.How would you say they compare to the PTS EPM midcaps? Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted March 2, 2016 Supporters Share Posted March 2, 2016 I sure wish they'd implement the automatic system for not quoting pictures here... Personally, I find the EPMs infinitely better than the Hexmags in terms of fitment and quite a lot better in the construction department, but as with any magazine it really depends on the rifles you're going to use them in (as far as fitting goes). Sacarathe 1 Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted March 2, 2016 Supporters Share Posted March 2, 2016 How would you say they compare to the PTS EPM midcaps? i've not used EPM mags before but if i compare these to my PTS M version Pmags then i'd have to say they are miles better Link to comment Share on other sites More sharing options...
Root Admin proffrink Posted March 2, 2016 Root Admin Share Posted March 2, 2016 The EPMs are very good. I've heard great reviews for both but sprung for the EPMs because of their 150rd capacity over the 120 of the Hex Mags. The EPMs do have a really ugly baseplate though, but are compatible with ranger plates etc. so replacing them isn't too tricky. Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted March 2, 2016 Supporters Share Posted March 2, 2016 I like the look of the EPM bases personally, but then I often like things that are widely regarded as ugly if they have good design and utility built in to them. They're much better to actually use as a monopod in the prone than a flat plate, doubly so vs a metal mag and I always shoot the L85 with the mag rested when I'm on the range so it's something I've tested out a fair bit over the years. proffrink 1 Link to comment Share on other sites More sharing options...
Root Admin proffrink Posted March 2, 2016 Root Admin Share Posted March 2, 2016 Fair enough - I know the rubberised bottom was meant for that purpose. I guess it's because I only bought a couple as low-cap backups for my M249 and to make cronoing easier, so they look strange. Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted March 2, 2016 Supporters Share Posted March 2, 2016 Well, you can always.. er.. rest the mag against a wall, or shoot the Minimi sideways, heh. proffrink 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now