Jump to content

Gun picture thread


M_P

Recommended Posts

11 hours ago, Impulse said:

The remaining guns that need testing and tweaking while I'm not allowed to play. Most are simple tests and tweaking, nothing major since I finally got the MWS hopping the ammo I want to put through it last Sunday. It's mostly just setting the hop for the weights I want to use, but a few other minor tweaks needed.

 

From left to right:

TM MWS w/ Modelworks mk12 kit - Need to make sure it's shooting straight. Scope I had on it was wonky because of the mounts on Sunday

Tanaka m700 w/ real Remington stock - Installed a new hop rubber and nub as it was a bit crap before. Need to set the hop now with the new setup

JG BAR-10 - Just need to find what psi to set for 1.1J so I can use it at night games / no MED games; disgustingly quiet since it's internally suppressed and half of that outer barrel is just alternating large/small foam baffles. Already know it shoots phenomenally at 155psi, which gives about 2.3J on .48s, and I can go as low as 80psi, so sure I can get it to 1.1J as well

G&P m14 DMR - Ironically not a DMR. Wasn't hopping well, but power, noise and snappiness was all amazing, so installed a new MR hop rubber. Need to set the hop up now.

KJW m700 - Usually has a suppressor on it! Finally got around to finishing this one with the threaded shorter outer barrel, as well as the AA hop unit, nub and flamingo rubber. Need to set it up, both power and hop up.

 

I think I have a type... 🤣

image.thumb.jpeg.7c562405373f4a814f112aa5268745cc.jpeg

 

Seems your type is long and slender, nice long range rack you have :). 

Link to comment
Share on other sites

Only playing mate, I know not to pick on a giraffe… holo would look much better.

 

I’d get some sling silencers and maybe move your dual switch if you can, that cable looks a little taught / snaggy.

Link to comment
Share on other sites

2 minutes ago, Wavey_Gravey said:

Only playing mate, I know not to pick on a giraffe… holo would look much better.

 

I’d get some sling silencers and maybe move your dual switch if you can, that cable looks a little taught / snaggy.


i know 😂. Think I’ll have to order one. I might have to I usually switch to 1 point when playing. 
 

yeh wish the cable was longer but the switch is in a nice place for my hand haha 

Link to comment
Share on other sites

A good few hours with the dremel and it’s “almost” a perfect fit

Fitted one of these to my M4 a couple of years ago and much prefer the angle for comfort. 
The standard 553’s grip is ok, but looks “meh”

So got a MOE-K2 AK version for SIG

Looks miles better imo

 

Before:

 

 IMG_2667.thumb.jpeg.c635431f2c76078539a2a3d29b4eb17e.jpeg
 

 

After:

 

IMG_2675.thumb.jpeg.3ffbeee28693d3c58a1eaf51028d808d.jpeg

Link to comment
Share on other sites

14 minutes ago, gavinkempsell said:

Been planning this for a while & happy with the outcome, still need to find a switchset... when I find it.

452747907_26215765864705467_6950275069417209902_n.jpg

453410068_26215766594705394_2435392966713361988_n.jpg

Mmmm🤔

Rather large for a weapon light. I'm sure you can get smaller 😉

Link to comment
Share on other sites

Just now, Shamal said:

Rather large for a weapon light. I'm sure you can get smaller

I'm compensating.

Link to comment
Share on other sites

26 minutes ago, gavinkempsell said:

Been planning this for a while & happy with the outcome, still need to find a switchset... when I find it.

452747907_26215765864705467_6950275069417209902_n.jpg

453410068_26215766594705394_2435392966713361988_n.jpg

Slap an LEP bulb inside and burn someone's retinas :D

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...