Popular Post Sifu Steve Posted June 27 Popular Post Share Posted June 27 (edited) New pew today 😁. Since using my lad's SSE18, I've wanted one for my ghillie rig, but I've decided to dual-purpose it for my cyberpunk CQB setup. The massive holo is a placeholder until my low-profile (red) red dot arrives, but I'm starting to get attached to it, whilst tactically sweeping my house over and over. The amplifier was primarily cosmetic but it definitely makes the pistol sound less anaemic. Also missing is a red flared mag well, as it was out of stock. She's ugly, but that's kind of the point. 😄 Once it's complete, the real project begins: Integral torch, using the foregrip cavity, and LED lighting in the rear carbine cavity... all for the cyberiness. 😄 Edited June 27 by Sifu Steve Egon_247, Ryan-B, JIG411 and 7 others 7 3 Link to comment Share on other sites More sharing options...
Popular Post MistakenMexican Posted June 29 Popular Post Share Posted June 29 Finished this build 👍🏽 RWA urban combat 2.0 in tinted black cherry. steel threaded barrel with 417 compensator. all the matching AGA furniture. AGA stippled grip with the big A Full steel internals. Pinovic, theSwede, Ryan-B and 4 others 7 Link to comment Share on other sites More sharing options...
Popular Post Egon_247 Posted June 30 Popular Post Share Posted June 30 On my quest, still.... Welrod aap. 😁🤣 BigStew, Ryan-B, Daveoc33 and 7 others 7 3 Link to comment Share on other sites More sharing options...
Popular Post gavinkempsell Posted June 30 Popular Post Share Posted June 30 Can you tell what it is yet? A trip to B&Q and a bit of fettling to be done then... "Build it, they will come". DanBow, johnnyj, Ryan-B and 5 others 4 4 Link to comment Share on other sites More sharing options...
Popular Post Skara Posted July 1 Popular Post Share Posted July 1 Did a bit of a revamp of my 10" M4.... It's now a 5" M4. Used a spare Specna upper receiver I had, got a new 5" carbon fibre barrel, moved the ARP-9 handguard from my AAP carbine, cut down and recrowned an old Guarder 363x6.02 barrel, replaced the cylinder (from 4/5 hole to 2/3), random spring (m100? m110? who knows) and now I have a very smol boi. Why? Because I want lightweight and compact for long tournaments, this horrid thing is very consistent in Joule output and spread (very surprising given the silly short barrel), plus I'll be strapping a thermal scope onto it at night, the more weight I can shave the better. Powered by a funny 7,4v 1800mAh 130/65c battery that gets me in the 25 RPS region (by sound, need to confirm via chrono). As always, functionality over aesthetics. P.S. G43 + FTC is on there just for show, I don't really use it. Egon_247, GothicGhost, Galvatron and 2 others 4 1 Link to comment Share on other sites More sharing options...
Herrgh Posted July 1 Share Posted July 1 After 10 years of playing, I finally have the cash and the knowledge to buy all the bits and bobs to make a tricked out rifle that has all the attachments that I neeeeeeeeeeeeeed. Being an adult finally has its perks! This comes after a little binge on Aliexpress for the final little pieces. Double Eagle M906C (completely stock and still kicking ass). PTS EPF-M MLOK foregrip. SOTAC Elcan Spectre 1x - 4x Scope WADSN M300A flashlight, on an ARIS Type 2 clone MLOK mount. WADSN DBAL-A2 Laser/light module (Red laser, flashlight, strobe, and IR laser). WADSN 3-button control unit thing with two leads for both the flashlight and the laser module. 3rd button is an ON/OFF switch (not momentary) for the flashlight. Mounts via MLOK Arson Machine MLOK and RIS-based "cable management solutions". Really pleasing stuff tbh. I love retail therapy. Last thing to get is some dinky little tracer unit, as my intention is for this to be my indoor gun now that it can light up a room and I can see where I'm going. Galvatron, Egon_247, gavinkempsell and 1 other 2 2 Link to comment Share on other sites More sharing options...
Popular Post gavinkempsell Posted July 2 Popular Post Share Posted July 2 (edited) Bought a few sidearms recently & had to rejig my wall to accommodate them, deffo need to find a better place for the Auto-9 tho. Edited July 2 by gavinkempsell Herrgh, Pinovic, JimFromHorsham and 2 others 1 4 Link to comment Share on other sites More sharing options...
Popular Post mightyjebus Posted July 2 Popular Post Share Posted July 2 Suns out, Gas AK guns out.... Pinovic, Egon_247, Enid_Puceflange and 2 others 3 2 Link to comment Share on other sites More sharing options...
Popular Post mightyjebus Posted July 6 Popular Post Share Posted July 6 Decided the TM AKM GBB needed real Soviet AKM wooden furniture adding. After a lot of swearing, it's now fitted. Nick G, GenuineGerman, Pinovic and 3 others 3 3 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted July 6 Share Posted July 6 28 minutes ago, mightyjebus said: Decided the TM AKM GBB needed real Soviet AKM wooden furniture adding. After a lot of swearing, it's now fitted. The standard TM furniture looks good, but that is MILES bettah 👌 Link to comment Share on other sites More sharing options...
gavinkempsell Posted July 6 Share Posted July 6 52 minutes ago, mightyjebus said: Decided the TM AKM GBB needed real Soviet AKM wooden furniture adding. After a lot of swearing, it's now fitted. Hmm, does that mean you have some to sell? Enid_Puceflange 1 Link to comment Share on other sites More sharing options...
mightyjebus Posted July 6 Share Posted July 6 4 hours ago, gavinkempsell said: Hmm, does that mean you have some to sell? yup, it's never going back on so up for grabs. I'll PM you a picture of all the bits available and we can go from there. gavinkempsell 1 Link to comment Share on other sites More sharing options...
Convert Posted July 6 Share Posted July 6 My decisively ugly pistol has reached a new level of hideous. Behold. 🤪 gavinkempsell and Skara 1 1 Link to comment Share on other sites More sharing options...
Shamal Posted July 6 Share Posted July 6 18 minutes ago, Convert said: My decisively ugly pistol has reached a new level of hideous. Behold. 🤪 Ahh tis indeed an abomination to mine eyes and no mistake. But beauty is in the eye of the beholder and I assume you be the holder. 😉 Convert 1 Link to comment Share on other sites More sharing options...
BigStew Posted July 6 Share Posted July 6 Collection is quiet small at the moment but finally got some storage. gavinkempsell and Nick G 2 Link to comment Share on other sites More sharing options...
gavinkempsell Posted July 6 Share Posted July 6 That'll be the gun caddy mentioned in another thread. GenuineGerman and Shamal 2 Link to comment Share on other sites More sharing options...
Convert Posted July 7 Share Posted July 7 9 hours ago, Shamal said: Ahh tis indeed an abomination to mine eyes and no mistake. But beauty is in the eye of the beholder and I assume you be the holder. 😉 If I squint 🤣❤️ Link to comment Share on other sites More sharing options...
Popular Post Darkmikey22 Posted July 7 Popular Post Share Posted July 7 (edited) Right, hopefully it's there now. A few minor tweaks to sort. Cable and ptt for LLM 3d printed and put together. Found the correct LLM ptt rail holder. Unit colour added to LDS. QR codes also added. Still on the look out for the correct sling loop. But I know this is only exclusive to the sa80, so maybe waiting a while. Now to finish my Borneo SAS m16 (colt model 602) with early triangle type charging handle and grooved bolt catch. Edited July 7 by Darkmikey22 Nick G, CrackCommandoUnit1972, Diemaco and 3 others 5 1 Link to comment Share on other sites More sharing options...
gavinkempsell Posted July 7 Share Posted July 7 1 minute ago, Darkmikey22 said: Still on the look out for the correct sling loop. But I know this is only exclusive to the sa80, so maybe waiting a while. Was gonna offer you a swop for the one on my A3 but it's a Keymod. Link to comment Share on other sites More sharing options...
Darkmikey22 Posted July 7 Share Posted July 7 1 hour ago, gavinkempsell said: Was gonna offer you a swop for the one on my A3 but it's a Keymod. Thanks for offer bud, but still wouldn't be the right one. The issued one is exclusive to the SA80 only as far as I'm Aware It's not a qd sling point, and is static in one position. I've purchased a multi position qd one for now, so It doesn't swivel. I may have to resort to making one. Here's the genuine one.... Link to comment Share on other sites More sharing options...
gavinkempsell Posted July 7 Share Posted July 7 No worries, it's an Ares L85A3 I have & it came with the keymod. Link to comment Share on other sites More sharing options...
Popular Post MistakenMexican Posted July 10 Popular Post Share Posted July 10 (edited) On 02/07/2024 at 18:44, mightyjebus said: Suns out, Gas AK guns out.... Here is my AKX as it stands. Edited July 10 by MistakenMexican Pinovic, Enid_Puceflange, Darkmikey22 and 3 others 4 2 Link to comment Share on other sites More sharing options...
mightyjebus Posted July 10 Share Posted July 10 nice MistakenMexican 1 Link to comment Share on other sites More sharing options...
Darkmikey22 Posted July 10 Share Posted July 10 I'm not normally an ak fan, but I can dig that. MistakenMexican 1 Link to comment Share on other sites More sharing options...
RomanZuk Posted July 11 Share Posted July 11 Part of my current collection. Not pictured; an absolutely battered(yet by miracle working)G36 I got from my local site, WEGlock 23 and a SRC TT Pinovic and gavinkempsell 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now