two_zero Posted May 28, 2014 Share Posted May 28, 2014 only problem is it's worn out and the blue is showing through so I'm striping it back yea... i'd put more green on it man! CaptainSwoop 1 Link to comment Share on other sites More sharing options...
Mack Posted May 29, 2014 Share Posted May 29, 2014 Finished my Sopmod today. Block II ftw! Monty, Esoterick and Unrustle_Thine_Jimmies 3 Link to comment Share on other sites More sharing options...
TacMaster Posted May 29, 2014 Share Posted May 29, 2014 What's with these copper coloured RIS systems? New fashion or something? Ian_Gere 1 Link to comment Share on other sites More sharing options...
Mack Posted May 29, 2014 Share Posted May 29, 2014 Just happens to be the colour of the real steel version. Id imagine it has something to do with breaking up the solid block of black and being used in a desert environment https://danieldefense.com/m4a1-rail-interface-system-ris-ii.html TacMaster 1 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted May 29, 2014 Supporters Share Posted May 29, 2014 Not new, that's for sure. That rail's been floating (hoho) around for years. Lots of american civvies get entire guns done that colour. TacMaster, Unrustle_Thine_Jimmies and Mack 3 Link to comment Share on other sites More sharing options...
TacMaster Posted May 29, 2014 Share Posted May 29, 2014 Little M4 update; brown furniture: Left the pistol grip black as it's not the original grip and I didn't spray it with sh*tty black PlastiKote 'matte' paint. AirsoftTed 1 Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted May 29, 2014 Supporters Share Posted May 29, 2014 Not new, that's for sure. That rail's been floating (hoho) around for years. Lots of american civvies get entire guns done that colour. on that topic actually, I figure if anyone's gonna know it'll be you chris, what's the best ceracote match for the daniel defence dark earth colour on their rails? The Madbull one's colouration is off and it annoys me! Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted May 29, 2014 Supporters Share Posted May 29, 2014 Err.. afraid I've never owned a DD rail, not really a fan of their designs personally to be honest. The 'burnt bronze' I see a lot of on ar-15.com looks pretty close but DD more than likely have their own special colour considering the size of the company and the fact it's put on a military contract item. I think the sort of people you'll want to ask will be on RS AR forums, but the original item is anodized so I guess if you want a dead on finish you'll want to go that way instead of cerakote. Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted May 29, 2014 Supporters Share Posted May 29, 2014 Balls. Probably easier to get a real rail! AirsoftTed 1 Link to comment Share on other sites More sharing options...
masadanator Posted May 31, 2014 Share Posted May 31, 2014 My 2008 Systema PTW MAX 2 Mods: FCC multi length outer barrel DD 12.5 RIS 2 Magpul AFG 1 Replica surefire m300 mini scout A crap tonne of XTM rail covers Replica peq 16 Replica aimpiont T1 on a LaRue mount Project PTW PMag shell with systema internals with regards to cost i think (since its been built up over a long period of time) its around £1400 Monty 1 Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted May 31, 2014 Supporters Share Posted May 31, 2014 My pistol is now very nearly done, just need a couple of +2 magazine bases and it's the 'full costa'. Airsoft-Ed, TheFull9, Airsoft_Mr B and 1 other 4 Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted May 31, 2014 Supporters Share Posted May 31, 2014 My 2008 Systema PTW MAX 2 PTW.jpg Mods: FCC multi length outer barrel DD 12.5 RIS 2 Magpul AFG 1 Replica surefire m300 mini scout A crap tonne of XTM rail covers Replica peq 16 Replica aimpiont T1 on a LaRue mount Project PTW PMag shell with systema internals with regards to cost i think (since its been built up over a long period of time) its around £1400 Where did you get the ranger plate mate been looking for some myself Link to comment Share on other sites More sharing options...
masadanator Posted May 31, 2014 Share Posted May 31, 2014 Where did you get the ranger plate mate been looking for some myself I got mine from Fire support Just after i bought the gun Qlimax 1 Link to comment Share on other sites More sharing options...
Happy Posted June 5, 2014 Share Posted June 5, 2014 Here's my Tokyo Marui High Cycle AUG in all it's tacticool glory: Eventually intend to make it better at longer range engagements since it dominates in CQB. Stock internals at the moment, though I intend to run a slightly longer tight bore through it as the end of the inner barrel sits a good inch or so back from the tip of the flash hider. Maybe I'll go the whole hog and run a bigger barrel through a mock suppressor. Hop up is already really good on this so will be unlikely to change that. Airsoft_Mr B and cavninja 2 Link to comment Share on other sites More sharing options...
CaptainDumbass Posted June 5, 2014 Share Posted June 5, 2014 fit a phantom kit on that you have yourself a beauty Link to comment Share on other sites More sharing options...
TacMaster Posted June 5, 2014 Share Posted June 5, 2014 That with a Phantom kit? Link to comment Share on other sites More sharing options...
Happy Posted June 5, 2014 Share Posted June 5, 2014 Hmm a possibility, they retail for what £90? May have to invest in one Link to comment Share on other sites More sharing options...
TacMaster Posted June 5, 2014 Share Posted June 5, 2014 Might find it a little difficult to buy, they've been out of stock every time I've seen them Airsoft_Mr B 1 Link to comment Share on other sites More sharing options...
Airsoft_Mr B Posted June 5, 2014 Share Posted June 5, 2014 Why make it so long? I'd much rather keep it as a beast for CQC myself. Link to comment Share on other sites More sharing options...
Airsoft_Mr B Posted June 5, 2014 Share Posted June 5, 2014 My pistol is now very nearly done, just need a couple of +2 magazine bases and it's the 'full costa'. Holy sh*t that is awesome! Really like the Costa Ludus and Salient Arms logos! Must have 'costa' a lot (not taking credit for that joke) jcheeseright 1 Link to comment Share on other sites More sharing options...
Spatch Posted June 5, 2014 Share Posted June 5, 2014 It's a marui, leave it alone! You will also find that a lot of the internal parts in high cycles are different to standard aeg's, they are best just left alone, especially the hop and barrel Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted June 5, 2014 Supporters Share Posted June 5, 2014 Holy sh*t that is awesome! Really like the Costa Ludus and Salient Arms logos! Must have 'costa' a lot (not taking credit for that joke) Current tally (RRP, not what I actually paid) is about $1600. Airsoft_Mr B 1 Link to comment Share on other sites More sharing options...
Airsoft_Mr B Posted June 5, 2014 Share Posted June 5, 2014 Cheers. It's called a Magwell slap, made by US Night Vision, same 'reusable sticker' idea as their mag wraps and other vinyl stuff. The design's by Mil-Spec Monkey, but USNV make various others. I was looking on MSM's website a few days ago and saw those decals / stencils. Did you buy them from the US and get your family to ship them over, or do you know of a UK / European retailer? Very annoying that it costs $40 to ship something like a $20 hoodie. Cheers Link to comment Share on other sites More sharing options...
Happy Posted June 5, 2014 Share Posted June 5, 2014 It's a marui, leave it alone! You will also find that a lot of the internal parts in high cycles are different to standard aeg's, they are best just left alone, especially the hop and barrelYeah I'm going nowhere near the hop, gearbox and spring as I'm happy with them so no worries there. Will probably just end up running a mock suppressor on it regardless of whether I upgrade the barrel or not. Link to comment Share on other sites More sharing options...
Popular Post Adam3088 Posted June 5, 2014 Popular Post Share Posted June 5, 2014 VN Mags might not have a massive capacity, love em for CQB though. Strap was butchered from various places, might get a proper one if they ever become easily available. Kind of want a suppressor as well, not really sure what to go for though. team flex, cavninja, TacMaster and 2 others 5 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now