Hudson
-
Posts
713 -
Joined
-
Last visited
-
Days Won
3 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Hudson
-
4 AKs is enough for Sunday...right? Or should I pack one moire, just in case?
-
G3 Midcaps; are they still a thing anywhere? All the places I've looked so far have been sold out for donkeys years.
-
It's Bring & Buy day at Otley this Sunday. I'd best gathe up some of the AEGs I don't mind selling!
-
Then it was likely you! Welcome back, either way!
-
Ahh, Mister Mood. I do vaguely remember you, I think. Were you on the #airsoft IRC channel regularly?
-
Dangermouse, by any chance?
-
They have for me so far, but what do you have to lose?
-
Contact the site with whom they have their membership, give them their name & number and go.
-
Probably not; just try the old unit and see how it goes first. You may be able to get one that has a better air seal, but you'll be as well off seeing how the old one works first.
-
Swiss Arms Firepower SAR10 CO2 gas VSR
Hudson replied to WoodfordWolf's topic in Guns, Gear & Loadouts
Not usable in it's standard state; it comes in at over 600fps! Probably as well off switching it out to either Spring or HPA. The CO2 gives around 40-50 shots I'd reckon; with a noticeable drop-off towards the end and poor consistency. Avoid unless you're looking for a base gun for a project. -
Anybody else had problems getting a Pro-Win M4 hop unit to fit? It won't go by about 1 or 2mm; I'm presuming due to the flat shape of the top section, as opposed to the slanted shape of normal hop units, perhaps?
-
Where in North Yorkshire, and what needs doing?
-
An M16 mag? First of all; give it a dose of percussive maintenance against something solid (yes, seriously). Sometimes things can just get stuck and need a good whack to free things up. If that doesn't help, look at the bottom of the mag & undo the screw there. You should then be able to just pull the inside of the magazine out through the top; you *may* need to push the two little tabs each side of it near the top in to do so, but it should just slide straight out. Then it's just a case of manually spinning the gears inside to see what the problem is; usually when a hi-cap stops feeding for me, you'll be turning the main wheel and see the small brass gear won't be spinning; or will only be spinning occasionally. Fixing it may need you to take the insides apart completely; but we'll come to that later.
-
How long ago last year were you playing, and was it at the same site as you are playing at now? If they were less than 12 months ago; you may be able to use one of them as your three games and be eligible already!
-
It's always this time of the weekend when I actually start wondering if I can actually be bothered going shooting in the morning or not.
-
So I've heard. G&G perfects are what I use and can recommend.
-
.28s are what I run and they're definitely worthwhile!
-
Indeed! I think the small size of the parcel *might* have helped possibly. The shipping was ¥1500, or just over £9 so even if they do sting you you'll only be out by about £4/5 now they have free shipping.
-
I wasn't charged any import, taxes or anything on mine, and that was about a month ago; but factor it in just in case.
-
Just checked: It was ¥6684 in total, so just under £42!
-
It might be worthwhile looking on X-Fire for a Pdi barrel. I ordered a 205mm 6.05 with two PDI buckings and it came out at about £40 in total or thereabouts; a bit cheaper than just a UK based Prometheus barrel alone would have been: and that's shipped from Japan!
