Hudson

Okay, so I eventually managed to get the gearbox and barrel out but it involved going in a back-asswards way. I had to slide the front end forward as much as possible, and take the gearbox out. Then I could slide the hop & barrel out to the rear. Even Witt that, I still see no way of getting access to the stock catch! What a faff for such a simple task!

Thanks but unfortunately not. There's no stock catch on that one, and it's the non-TM style design.

As the title says, I'm having trouble stripping mine down. I bought it purely out of curiosity as it's dirt cheap, and after getting the M4 PDW they also do & being pleasantly surprised on performance, despite its plasticy cheapness. It seems to be mostly based on the old Marui style design which I've had experience of for 2 decades now and I thought would be a doddle. However, the one issue I'm having is removing the front section (hop, outer barrel etc.) From the body. The catch for the side-folding stock seems to be part of the barrel assembly and not the lower receiver as on other AKs I've used before. So when I try and slide the front end out to separate the two halves, the stock catch will stop you doing so. Unless I'm being completely dense (a strong possibility) I can't see any way to remove the stock catch prior to this to allow it to slide out. I can't remove it from inside, above, below or even by trying to get in the hole for the catch itself and it's got me stumped, as there obviously has to be a way to do it. Has anyone had experience with these before? (They've not been around that long afaik, and they're not exactly seen as cool so I imagine not many people will have bothered tbh). Photos will come later, as soon as I can, but there's not really much to show unfortunately.

1. Keep your empty mags with you unless you're a millionaire. You'll need them to reload! (It's not Hollywood). 2. Generally yes, but you may have limitations when it comes to snipers or DMRs, depending on your site. FPS rules will apply, so don't try and use a hot gun. 3. Usually via RIS rails and similar, will depend on what gun and attachments specifically. 4. I'll leave that for someone more southern. 5. Depends on the site.

What is it you're trying to buy?

Yes, I replaced the whole of the cylinder internals, as I use 9mm springs, not 7mm. Standard piston will probably be okay if you keep it stock (mine was about 270fps out the box) but once you put a higher powered spring in, then you'll need a better, stronger one. T10 and t11 were both identical internally, at least on mine.

I've had the T10 and T11 for a few years now. Did you also change the piston? If not, you'll want to change that if you've upgraded the spring, as it's just plastic and very light. The trigger itself is fine, I'm still running the standard ones on mine.

Geoff's do bio ammo in heavier weights.

Only £400 for a rifle that's £250 new! https://www.usedairsoft.co.uk/rif-s/spring-powered_2/de-m66-pro-700-sniper-rifle_i40894

What are you trying to do, and where are you planning on doing it?

TBF, the pulse rifle is just a Thompson in a body kit.

I don't think there's much available for the M50 unfortunately. It's an entry level rifle, with a lot of proprietary parts, that are almost, but not-quite like other models.

I don't remember there being an Uzi in Quake? There was the nailgun and super nailgun but no Uzi iirc.

Looks like an HFC M8000 at a guess. The smaller brother of the M92. I don't know if you can get mags for them anymore unfortunately.

Welcome! A quid is to a pound what a buck is to a dollar. It's just a slang term.

If you're wanting to keep it under 350/1.13J, would a better question not simply be "How do I get the most accuracy and consistency out of my gun"? You can use any normal AEG, just make it perform well, and then never use full automatic. Then it'll be usable in your non-DMR DMR role, but simply have it depend on your ability & skills, as getting rid of semi won't give you any material advantage if you're keeping it at standard AEG levels.

https://www.patrolbase.co.uk/patrol-base-coloured-team-id-arm-band?pv=19372

Tbf I think it's the speedloader that's bumping up the price.

It's too early for this. I've barely woken up. 😑 https://airsoft-forums.uk/classifieds/item/28865-bundle/

If you want to use the maple leaf bucking, you could speak to @ak2m4 and buy a ZCI barrel. They're pretty cheap and decent, and should work well with the ML. Inner barrels

What barrel and model ML bucking are you using? Check that your hop window is suitable for the bucking, as some can be too small to work properly, and post up a photo if you can.

Taking it in a different route, do you wear glasses? If not, how's your vision, and have you had an eye test recently? It could be something as simple as that. I struggled with spotting people at a distance for a while, until I finally found out I needed glasses. They made a world of difference once I did though!

No, that went years ago! 😂 Where are you playing nowadays?

Same magaz from Ambush Strines, of the white gloves?