MrTea

In top right corner, click your name and it's the second to bottom option.

I agree with the underarm only and no higher that waist height. It's a big ol chunk of metal so it's still gonna suck if you kneecap someone with it, nevermind anywhere else. I've never used my impact BFGs (or any BFGs) outdoors for fear of losing it. Never had one not go off when indoors with the exception of dud blanks.

Yeah, Ebay has removed that listing. You'd be best off posting more info here. Must admit, i'd be interested in testing these. Was very happy with the 12g large flashbangs I got from you. Will be interesting to see how much of a flash the 9mm can produce.

Hi all. I have someone interested in buying my custom 'Mk18' style AEG but haven't a clue what to value it at. Can anyone throw out some prices what they think it's worth to help me out? Details below; **EXTERNALS** Specna Arms Polymer Receiver with RRA trademarks. Nuprol Bocca Series 2 handguard 12" - Bronze. Magpul CTR style stock. 4x Tan Battleaxe mid-cap magazines. KAC style 3-prong flash hider with QD suppressor. Tan AFG. Polymer folding iron sights. RIS rail QD sling mount. Raptor style charging handle. Generic sling plate. **INTERNALS** Perun Hybrid V2 MOSFET - wired to deans. Quick change bearing spring guide. M100 Spring. Maple Leaf Macaron 60 degree bucking and Omega nub. ZCI Cylinder. ZCI Cylinder head - double O-rings. ZCI Piston - 14 teeth metal rack. ZCI Piston head - 6 vents. ZCI Aluminium Nozzle with O-ring - 21.4mm. Standard Specna Arms 18:1 gears. Re-shimmed & Re-greased. SHS High Torque motor. 310mm ZCI 6.02mm Inner Barrel. The person has seen the pics and a video of it firing and is very happy with the semi trigger response and ROF but won't make me an offer for fear of low-balling and I have no idea what it's worth. Apologies for any shoddy formatting, I'm posting on mobile. Ty.

Can't say I ever have. It's not a huge amount of air that's being blasted into your goggles, it's just enough circulation to stop them fogging up. I've played a full 6 hours with it on it's highest setting and not had an issue.

I have an Exfog. It has two open ended tubes that I just stuff into the top of my goggles, one each side. I had already pulled the foam off for better ventilation. The rubber that the foam was attached to is soft enough to push aside and slide the tube in and then route it through my helmet and cut to size. I bought the velcro pouch and just stuck it to the back of my helmet under the bungees so it didn't go anywhere. I believe the tubing is just some generic PVC tubing used in aquariums and such but I can't remember what size it is. I pair my Exfog with some Revision anti-fog wipes which are cheap as chips and last for months at a time as long as you don't get it dirty and re-seal it. Only downside i've ever found is that when using active hearing protection, that's mounted to the helmet, it'll amplify the vibration from the fan/motor and be really annoying.

When in CQB sites I use whatever i'm using in my AEG because I don't have to bother with two bags of BBs. Never had an issue firing 0.25g or 0.28g BBs though I know things like my MK23 can easily hop way heavier.

Strange. I used a Specna Arms core-04 with the standard 's-mag' mid caps, Nuprol n-mag mid caps and Battleaxe mid caps and never had an issue. Like Colin said, try holding the mag in a couple of different positions and see what works, you can then either use velcro or even layers of electrical tape on the magazine so it always goes into the position it feeds best in.

Krytac LVOA-C. Used in 3/4 outdoors games. Comes in original box and is fitted with; Standard iron sights Standard stock changed to Magpul CTR style stock Prometheus 6.03mm tight-bore inner barrel Prometheus metal wide-use hop unit Maple leaf Macaron Yellow bucking Maple leaf Omega nub Magpul style RIS QD sling mount Cosmetically there's some scuffing on top RIS rail where I was mounting/removing optics (see pictures). Selling due to not getting used any more as I prefer using my DMR outdoors and have other AEGs if I wanted to use one so this is surplus to requirements. Not sure what to list it for.

If you want in-ear protection; i've used the Earmor M20. They work, don't cause your ears/side of the head to get hot but at the same time, you can still got shot in the ear which sucks. Can pick these ones up on ebay for about £40 new. If you want over-ear, i've used the Earmor M31. Again, they work. They protect your ears but your head/ears tends to get hot. As a note for both Earmor offerings; they don't go completely silent when they detect loud noises. The best way I can describe is that they cut out all of the top end so you can hear the 'loud' noise but at a safe volume level. In comparison, I have an unbranded headset (comtac knock offs) that cut all sound completely (depending on how loud it is) and fades sound back in afterwards.

I see you fellow man of culture! I've bought one of those retro emulation console devices so I can play old stuff like this.

I played it offline the whole way through and it was a quality time because I wasn't taken out of my immersion by other people. On console, this wouldn't surprise me at all.

It has a few bronze bristles but not a lot. That section of the bore snake seems narrower than the rest of the snake too. I've mainly used it on my MP5 which has a stainless barrel and i've never noticed any degredation in performance if it was damaging the inner barrel. If you really want something like this without brushes at all, you can get something called a 'bore-whip' or trying pulling out as many of the brushes as possible.

Baldurs Gate 3. What i'd consider an almost perfect game. Demolished the competition at The Game Awards resulting a lot of seething from Spiderman fans.

As an alternative to this for actually cleaning the barrel, I use a 5.56/.223 bore snake (also known as a pull through). Tight enough that it cleans the entire inner barrel in one pass and doesn't need loads of force to pull it through. Only tools I take are allen keys, screwdriver set and the bore snake just incase the inner barrel gets dirty/fouled. If I can't fix my issues with these alone, then I have a backup for a reason.

If you're looking for smaller unit purchases (though more often) i've never had an issue using 0.25g tracers from Rebel Precision alongside Tippmann 0.28g bio tracers. I've not used both companies non-tracer BBs but can't imagine the quality/performance is much different from their tracers. For outdoor/regular BBs I use just about anything (never had jamming issues) but my current stock are BLS for 0.28g upwards which I use exclusively for outdoors.

King Arms mid-caps work perfectly fine in my CYMA P90 so I can't see why they wouldn't in a Krytac one. P90 high caps are a bad idea. To wind them up you need to remove them from the gun, wind them up and re-insert after... go for the box of 5 mid-caps on fire-support for £62 plus mid-caps don't rattle like a maraca.

On my MP5, before I was doing my own tech work, I had a tech fit the cheapest mosfet they had (Gate Pico SSR3 - £15) just so I could run 11.1v LiPo safely. It has exactly zero features of the pricier MOSFETs and i've never had an issue with it to be honest. Having 13:1 gears and a HT motor means the trigger response is great anyway and i'd probably not gain a lot from going to a AB++ or a Hybrid.

Would something like this be of interest? Or like this?

Interested in a 260mm for the P90. Very interested to see how these perform.

Whew that's a nice looking gun!

Are you looking for a working gun (regardless of gearbox type) to pull apart and see how it works? I've got a CYMA CM.028A AK just sat in the corner doing nothing. It was boneyard as the previous owner snapped a screw hole which i've repaired with an original part. It works but sucks ass IMO because of the creaky cheap plastic.

LOL. I was looking at the RIF you bought too thinking "damn, for £100, should I???" but then realised AH boneyard sells quick and finished my checkout. By the time I came back you must have snagged it! I was interested in the WE glock too but just couldn't justify it atm.