Jump to content

MrTea

Members
  • Posts

    645
  • Joined

  • Last visited

  • Days Won

    3
  • Feedback

    100%

Everything posted by MrTea

  1. How long did it take to print and how many parts is it made of?
  2. 22 hours into a ~24 hour print and it falls off the print bed 😭 RIP 200g of filament.
  3. Time Left: 13 hours and 10 minutes

    • For sale
    • Used

    Selling my JG AUG (AU-3G) which has been upgraded with a Perun AUG MOSFET - this means the rifle maintains it's 'two-stage' trigger without the sloppy feel of having a trigger bar pushing into contacts on the gearbox. This also means it has excellent trigger response and great ROF, especially on 11.1v. The rifle has sling points integrated into the body however if you want to remove these, there are some washers on the inside of the rifle that you have to pop off then remove the sling point. Comes with 3x high cap magazines - one polymer and two black - all working. £210 - Price INCLUDES Paypal fees and postage with Parcelforce 48 hour. What you see is what you pay. OPEN TO OFFERS

    £210

    Hartlepool

  4. MrTea

    Mil-Tec Rifle Bag

    This advert is COMPLETED!

    • For sale
    • Used

    Mil-tec heavy duty rifle bag with velcro straps to secure your rifle in place. No middle divider but easily big enough for two rifles. Three big front pockets and internal zippered storage on the inside. 103cm x 30cm approx - £20. Price includes postage and paypal fees.

    £20

    Hartlepool

  5. Use adguard DNS. Kills most ads.
  6. I know some stores price match others as long as it isn't on sale and it's in the UK. Asking doesn't hurt, worst they can say is no.
  7. Yeah was shooting at 400fps when I first tested it. The mag was just a spare high cap I had laying around so I pulled the internals out and superglued the pin back in to give some rigidity to the top of the mag. Wiring is still into the mag as it's just the better place for it tbh. If I wanted to make the profile smaller, I could get a short mag and put a peq box size battery in there.
  8. It is. I had to drop the spring down to a M110 to get it inside the limits. No idea what it came stock with. The hop unit is a bit strange, it's like a M4 and P90 hop put together and the inner barrel has a fair bit of movement even when assembled so I pushed an O-ring into the space between the hop unit and the inner barrel to hold it a bit more secure. I had to glue the nub to the hop arm as it kept getting stuck in place when winding the hop off. Gearbox looks to be a standard V2 but without a quick change spring and all the internals appear pretty much standard except the nozzle which is a long brass thing. Really should have measured it. Not sure what's going on with the rails on this - I had to really force the angled grip on and my KAC style rail covers just will not fit at all - it's like the rails are ever so slightly wider than all my other RIFs. The mock charging handle is a bit loose because the spring is about 3-5mm too short so it has some play. I have no idea how to take that apart so it's staying as is for now.
  9. Finally (almost) finished with a rifle i've was after for a while until @ButcherBill sold me his AR57.
  10. Is that the same guy who was trying to flog it for ~£300? So it's actually knackered? I wonder if it was faulty when he had it listed originally.
  11. Rather than take the thread further off topic than it already has been, i'll just drop you a DM.
  12. Magpul PDR-C I think. Had a chance to get hold of one about a year ago and I constantly kick myself that I didn't take up the offer.
  13. North East - the site is Armageddon Airsoft.
  14. Is that your experience of the site? I've been going well over a year now (I think) and it's nowhere near like what you're making out. There are always one or two special people like that who turn up at every site but the overwhelming majority of players are great and the marshalls make a great effort to correct problematic people but it's very rare there are any. The only time i've had a negative experience there was when a certain team of 4-6 people showed up and decided they were allowed to play by different rules than everyone else.
  15. I've seen someone buy one at the site. It was a relatively new guy who had no idea about what's good and what's not so he was talking to regulars. Myself and a few others had been chatting with him and letting him handle the different rifles we had so he could see what he did and didn't like. I'm sure we told him to not buy one of those just because it was immediately available and it had likely been battered but he did anyway 🤷‍♂️
  16. Most times I just hang it up outside to air off. If it gets particuarly bad, put some washing gear in a bucket with warm water and give it a couple swirls/dunks. Leave for about 30 mins, rinse in clean water and hang dry.
  17. Not so much about how my airsoft day went, but how preparing for Sunday went. I was picking out a rifle to use with my launcher for the 3D printed projectiles and thought 'hmm, it's been a while since i've used this, I should probably check and re-lube it if needed'. I took the gearbox out to find a few cracks around the piston head. The second I touched it, it came apart. I had a spare G&G V2 gearbox shell but that doesn't fit in the Specna Arms receiver. RIP Specna Arms gearbox - 2 years in my hands and god knows how many in the last owners. ZCI replacement on the way from AK2M4. The work/repair list now consists of: Mk18 - new gearbox shell required KWA KM4A1 - Got it from action hobbies but they failed to mention the gearbox shell was also shagged in this. Will probably use as a donor shell because of Colt trademarks. Ares RDB - piston shredded or sector gear knackered I think AR57 - requires Perun ETU installing after dud one bought from user on here MP5SD6 - needs backdraft HPA unit fitting HPA M4 - firing semi only despite having full auto functionality - was planning on using this tomorrow but now it's giving me issues P90 long barrel - requires ETU installing I've got a lot to be getting on with. Update: As for the actual airsoft day - it went pretty well. I took the L85 to see if i'd solved the issue of the RNG accuracy and I hadn't so I brought out the sniper and that went very well. Using a new optic I can now see where the BBs are landing which made sniping way easier today - when I could see through the summer foliage that is. Armageddon is a very heavily vegetated site which hampers sniping a lot so you have to pick your position well. I got a fair few kills both attacking and defending and one i'm particuarly proud of was when attacking, I managed to shoot through a gap about 3" wide between some tyres to hit a guy hiding in a makeshift bunker. When defending myself and another sniper with a ghillie held down our complete right flank and some of the middle ground 'killing' 10-15 players between us. I like sniping but I HATE the rubber(?) coating on the JG Bar-10 rifle stock. I've cleaned this thing several times and it always ends up sticky and bits start to come off. Will be looking for an aftermarket stock thats just as light or lighter. I like the look of the Maple Leaf MLC stocks, particuarly the S2 but no idea how they compare. Will have to have a look around.
  18. That's better than expected for those little cap-gun caps. Just waiting for the rifling for the inside of the launcher to finish printing and I can test if it 'whistles' through the air - As seen here. Sorry for how big the video is, I can't seem to resize it so I hid it inside a spoiler. FulcrumAirsoft on Cults3D
  19. Time Left: 13 hours and 10 minutes

    • For sale
    • Used

    Nuprol PMC Essentials rifle case in Grey - 46" in length. Surplus to requirements. £20. Price includes postage and paypal fees.

    £20

    Hartlepool

  20. This advert is COMPLETED!

    • For sale
    • Used

    Been my main kit bag for the last ~2 years. 60 Litre main compartment with two removeable and padded dividers. Two big zippered compartments on the outside and one on the top of the bag. Two mesh pockets on the inside of the lid. Great for moving from the car to the safezone as it has included backpack straps leaving your hands free for other stuff. Also has carry handles on each end and one on the top of the bag. - £25 Prices includes postage and paypal fees.

    £25

    Hartlepool - GB

  21. Time Left: 13 hours and 10 minutes

    • For sale
    • Used

    Assorted parts, gear, pouches etc. All prices include postage and paypal fees. Black low profile harness, molle battle belt and 2x viper elite pistol mag pouches -SOLD SOLD SOLD Official Magpul MOE (GBB) pistol grip in Grey - brand new, I bought the wrong colour - SOLD SOLD SOLD Black roll-up dump pouch - £5 2x Viper Tactical P90 mag pouches in black - SOLD SOLD SOLD 2x P90 high cap magazines -SOLD SOLD SOLD Scar-H high cap magazine - £5 Valken Thermal Goggles - £15 Univeral Glock holster on mid-ride loop in Multicam -SOLD SOLD SOLD Amomax 2011 universal holster in black - SOLD SOLD SOLD Cytac universal PISTOL MAGAZINE holster - £10 Generic M4 mid cap polymer - £5 Taran Tactical M4 mid cap magazine (220 round) - £10 Krytac M4 mid cap magazine (150 round) - SOLD SOLD SOLD 2x 'frag' grenade pouches in black - £5 Viper Tactical dump pouch in multicam - £5 Viper Tactical single M4 magazine pouch in black - £5 Shift Grip replica m-lok. Metal construction - SOLD SOLD SOLD Perun V2 'Clicker' - SOLD SOLD SOLD Two-point rifle sling in black. HK style clips on either end. Quick adjusting by pull tab -SOLD SOLD SOLD 'CLPD' CZ Shadow 2 upgrade parts. Includes adjustable steel trigger, lightweight blow back housing and hop rubber. - £10 Mechanix Gloves in black. Medium Size - SOLD SOLD SOLD Rifle Sock - SOLD SOLD SOLD Patrol cap - £5 Mutlicam Tropic balaclava - SOLD SOLD SOLD Multicam balaclava - SOLD SOLD SOLD Cytac holster for USP/USPC - £10 MFH admin panel in black. New with tags - £5 G33 style 3x magnifier. Has Eotec markings. Glass is clear - SOLD SOLD SOLD G33 style 3x magnifier. Has Eotec markings. Glass is clear - SOLD SOLD SOLD G33 style 3x magnifier. No markings. Glass is clear - SOLD SOLD SOLD FMA (I think) PEQ box. Light works, laser does not - SOLD SOLD SOLD Admin panel in multicam - £5 Smoke/grenade pouch in multicam -SOLD SOLD SOLD ESSTAC Kywi style pistol pouch in multicam - SOLD SOLD SOLD Viper generic storage pouch in black - £5 Viper Tactical gloves in black - £5 Sniper stock pouch in multicam - £5 Magpul MOE AEG pistol grip. Adjustment screw is there. - SOLD SOLD SOLD Standard M4 pistol grip for GBBR - £5 Repro Surefire X300 pistol light. Lightly used as I swapped to legit pistol lights. Very bright - SOLD SOLD SOLD 2x Viper Elite pistol mag pouch in multicam - £7 2x Surplus British Army pouches in multicam - £7 2x Viper smoke/grenade pouches in multicam - SOLD SOLD SOLD Generic M4 stock - £5 119. Emersongear Multicam Tropic helmet cover - £5 120. Remington Tactical light with tape switch - £10 Purchasing multiple items will reduce the cost as postage will be cheaper depending on size & weight of the parcel. Open to offers. Any questions let me know.

    £1,234

    Hartlepool

  22. Very nice. Is that file available online or did you design it yourself? How's the durability? Very cool.
  23. Time Left: 13 hours and 10 minutes

    • For sale
    • Used

    Underwater Kinetics 821 - 20.9in x 12.9in x 8.4in - Brand new 'pick and pluck' foam. 2x foam layers. This is the bigger case and has more wear on the exterior with some old stickers from previous owner. £60 Underwater Kinetics 518 - 17.8in x 12.8in x 5.1 in - Brand new 'pick and pluck' foam. 1x foam layer. This is the smaller of the two cases but has almost no wear on the exterior. £50 Due to size & weight these will be sent with Parcelforce on a 48 hour service. All prices include Paypal and postage fees. Open to offers.

    £60

    Hartlepool

  24. This advert is COMPLETED!

    • For sale
    • Used

    Surplus to requirements. 6x Mags - all leak free. No need to buy as a lot so i've priced the mags individually. 4 SOLD ONLY 2 REMAINING. £15 per mag NOT including postage. Buying multiple mags will result in a flat postage charge (usually around £3.50 for a 48 hour service with Royal Mail)

    £15

  25. Knocked my boxes of blanks off the shelf and they scattered just about everywhere so I printed a little box to keep them in. Hinges and latches are attached with M3X20mm screws/bolts. The shells can move up and down a bit due to the box being designed for live rounds but they don't fall out of the grid.
×
×
  • Create New...