concretesnail

Allen key set. Gaffer tape Elastic bands Paracord Cloth tape/finger tape

That's not a bad shout. I used big luggs on a lot of my work tools, good stuff.

When running my vsr or dmr I have a weapon link which I've attached to 90° adaptor on my mp9 so it stays flat to the body. https://bombupairsoft.co.uk/products/fma-weapon-link-retention-molle-dark-earth?variant=31913145434215

If a manufacture says 11.1 I'd go 11.1 As the internals would be designed around that voltage.

I heard very mixed reviews on the customer contact front, but having seen the product, they are good. Having said that I tried for a set but in the end I gave up trying to get any communication out of them and made my own weights. I hope you have better luck than I did.

You could have a look at the warrior pathfinder rig. It's made to be worn standalone or velcro/clip placard onto the recon carrier. The velcro panel on the back can carry a dangler or horizontal molle system.

Hahahahaha.

If all the parts you received are in those photos then you are short a few to be sure. I can't see selectors and their associated screws or the bolt release catch, though the bolt catch isn't required for function. The inner barrel also looks a tad long. As for was it good price; only you can know, as it looks like you have an unfinished project or someone's I don't know what I'm doing, on your hands. If the titan is in there and functional then you wouldnt be out of pocket if you parted it out I think. Having said that you have the parts which aren't pictured then you have the makings of a potentially good rif, if you can put it together.

Hello, welcome and you ccantbbe any old than the rest of us.

If you should be tell if there is a gate unit in the 308, its fairly obvious. If you have time and inclination a photo of the 308 pats laid out I could most likely tell if something is missing as I've stripped mine a good few times.

If the 308 internals which operate the stop on empty function have gone completely (gearbox gone) then its a little harder decision and it would come down to which felt better in the hand. Though I'd be tempted to go or the mod 2 for something shorter for cqb sites.

I know a chap who started playing with strobe and then sacked it off as its not much use in a practical sense. A weapon light with a momentary switch is what he uses now. I have always used a light with a momentary switch which can be used to push positions and corners but goes dark instantly.

I'd keep the 308 and the cyma. One stops on empty and runs a dmr caliber magazine. Ticks two boxes for me, giving access to some site dmr rules if wanted and it stops on in empty. Cyma AK, its a ak, why wouldn't you keep it. Prk, as much as I like rhe vityaz 9mm the prk isn't it and as much as like kwa feel, they dropped the stop on empty to put gate mosfets in.

Function wise mine was great. The only issue I had was finding an npas that fit, but that years ago, in the end I built up a new nozzle for cqb. I did come across some people who had issues with miss feeding but I know kwa changed the feed lips on the mags and there's a producer which makes single feed lips for the magazines as well.

Start with your ht leads, give them a once over with some wd40 or other moisture displacement compound. If the outers start to break down then they become susceptible to higher resistance due to moisture.

If it was me it would a copy of the finance paperwork, the only way I could get a setup like this. I'd love an nvg setup so I'm just green with envy.

I know you change your mind under distance selling rules but I think you have to returning it in an unused condition, if you have used it, then it would be warranty on faulty if it is faulty. Faulty doesn't cover user error/assembly error unfortunately unless the instructions are wrong.

The softened edges look good.

It's a good start, I wouldn't go any harder, it's much easier to a bit more than a bit less. I'd be tempted to give it an oil wash and wipe over to soften the contrasts. It's used and worked but maintained when possible.

Video from a shop reads as, use a smaller voltage so we have less hassle dealing with any warranty issue. If the manufacturer states use 11.1v lipo then use it. The motor will draw what it needs and you should use a battery that can supply that, using an under rated lipo next to tor face isnt a great idea. I use a 3s 1050 80c battery in my 308 and it stays cool and by the end of the day it's nearly back to storage voltage. In fact it's a much easier life for the battery than strapped to one of my fpv quad.

There's quite a few sites around Manchester, but I don't know any that allow under 13s to play, due to insurance I believe, best bet would be to find some local sites that you fancy and contact them directly.

Like you I use custom molded when I'm riding, and before that I used foams, I've always preferred helmets with lots of venting and the wind noise is killer long term. I do love the bang and booming of pyro and I'm surprised how many people I see playing that don't use hearing protection, I treat mine like eye pro. Once it's gone, it's gone kind of thinking. On the peltor front though I certain recommend the gel cups, they are so much better than the foam.

If your thinking about hearing protection then do it, either in or over ear. I've tried the in ear units and they work though fit is tricky, for me i couldnt get it to hold and seal easily, and wasn't as good as it could be when it did sit so it would work loose then eventually fall out. In the end I when with the over the head, peltor sporttac, and i also got two aux cables, one mono, lives hooked into my rpc and mic. And the other I use for work plugged into my phone for audio books and they are great.

Have a look at the arp 556, as Mr. No face mentioned its an arp internals but 556 mag well. There are two versions now, one alloy one polymer, other than the bodies they are the same.

I use the placard systems so for different loadouts I just rip of the front of my rig off and change it, usually I keep the appropriate panel in or on the case for the matching rif. If i had the dcs already I'd look for a placard adaptor. Tactical uk and hueys are a good place to start.