Nick G

Not so much made as modified, but ACOG wing mount for the docter sight on my L119 A1 Found a metal one but with cut out's , so filled them with plastic card then painted it. Happy eith the results.

Hers's mine. E&L about 3rd hand when it came to me. Still solid as hell !

Yes it is , looks like this

That's a beast !

320 - 330 fps seems low for an M110 spring in my experience. I'd suspect a seal issue dropping the fps to that level the 400 ish is much more likely the 'normal' level. Start by checking the hop rubber and make sure it's sitting correctly. After that it does start to involve removing and opening the gearbox TBH. Plenty of videos out there on how to do it and how to check compression if you fancy having a go yourself.

How my L119 A2 long dmr build sits at the moment. Performing well, slot booked for machining and trades . Then all the detail work to do. Grip, stock and foregrip are all genuine. Real steel mag catch ready to go on . Fire selector modded for semi only. ELCAN not totaly legit , but works very well and swaps onto the L85.

Awesome result 😀

When it stops , what does it do ? does it still 'fire' but no BB comes out ? does the trigger jam ? does it light strike as in you can feel the hammer 'click' but no gas vents from the mag ?

I use them loads, for parts and RIFs. Never had an issue.

I stand corrected 😀

If it looks like this then any RMR should fit Does the nuprol version switch betwee 1X and 4X ?

Converted a Storm grip that was for a PTS (I think) to work with a GBBR . Grafted a section of WE M4 grip in . It's for a mate's L119 A1 build and GBBR Storm grips seem to be rather thin on the ground at the mo.

Hi and welcome, from another Devon player !

Not a day , but a few of us have done a couple of sessions at an indoor airsoft place that's close by. It's all target based with electronic targets that can be set in various modes. 4 of us went up there last evening with some of the GBBRs and just did some speed games and some general target shooting , absolute bloody hoot !

You could always cut the slot into one with a dremel

To be fair most GBBRs are over powered out of the box , easily sorted with an NPAS or power down nozzle though.

Oh that looks fun !

That is tight then. I've never had a barrel extension that had a grub screw so I doubt there will be one. You might try some heat, ended up dunking one of mine in a mug of boiling water to get it to shift . There is also a verey very slight chance it is a 'normal' thread but I'd be incredibly surprised they are quite unusual in airsoft. I'd go with heat and see if that helps, might have been thread locked.

that should just unscrew , sometimes they can be very tight, and remember it'll be a ccw thread so unscrews the oposite way to a 'normal' thread . You going to run the silencer hard against the rail ? that'lllook very cool ! if you want to take the birdcage off of that extension there is usually a grub screw under the rear of it that needs releasing

Can you be a bit more specific about which bit you are trying to remove ? a silencer would generally just replace the flash hider.

And it now looks like this ! Very long way to go with it yet, barrel is too short for starters, then it will need machining , trades, receiver mods etc. Machining slot is booked though (6 month lead time) . I've modded the fire selector so it's semi only and firing at aprox 1.7j ,my local site has a 1.9j limit for DMR And the inspiration for the build . Not strictly a DMR in the classic style but damn cool.

If you've got other RIFs to use might be the perfect oportunity to start doing your own teching and upgrading. M4 platform is pretty easy to work on , changing hop rubber, barrel etc is straight forward and plenty of how too's for V2 box's out there.

If the E&C is the 'classic' 416 it has a different mag well than a normal M4 , deeper at the front, that does cause fit issues with some mags. I have some Lonex flash mags that fit my 416 but I have no idea what brand the receiver is as I built it from parts. Hopefully someone has the same gun as you and can answer definitivly

Right, right, ok, you're all dreadfull bullies and I hate all of you ! 🤣😂 Might need to invest in a truss now........holy crap it's heavy ! 🤣

I did notice that they dissapeared rather rapidly ! I've got an ambi semi auto only selector whict I plan to adapt to fit and also have the HAO right side 'knob' so hopefully I can make something up