Jump to content
[Updated] You are on the old AF-UK forums. ×

Monkman

Members
 View Profile  See their activity

  • Posts

    373

  • Joined

  • Last visited

  • Feedback

    100%

 Content Type 

Everything posted by Monkman

  1. Monkman

    Going into Birmingham tonight to try out Bravo One.  :)

    1. Monkman

      Monkman

      Well what a waste of time that was...first off I paid for parking but it was free after 6pm. (Machine with info had stickers all over it, so couldn't read any of the blurb)  Got onsite, started setting up..chrono time and 330fps maximum limit.  WTF?  Both my G&G and ICS were too hot for this place, just a tad over their 5% allowance.  I can use my guns at other CQB venues just fine as every other CQB place i've been to is 350.  So faced with no usable pew pew...I had to leave, asked for a refund but they said no!  Then they offered to rent me a AK for £12 for 2hrs..Umm, no thanks.  So walked out pretty pissed off and £24 + fuel down in pocket.  (Even put a m95 spring in my ICS as it's quick change, but still just over)

      Should I buy a m90 spring and go back?  Seemed like a good bunch of lads who turned up...just annoyed at their silly fps limits. /end rant!

  2. Monkman

    Need help!..When filling my Tokyo Marui HK45 pistol mags with greengas, I have an issue with a lot of gas/liquid not actually going in and spurting everywhere from the gas fill nozzle and valve..some gas goes in but a lot just goes everywhere..this happens on all 3 of my mags.  I've removed all the valves, lubed them with silicon oil, screwed them back in gently, but still get a lot of excess spurting out when filling..they never did it when new.  Any thoughts or tips?

    1. Show previous comments  6 more
    2. Asomodai

      Asomodai

      Have you ever had a TM before? This is standard behaviour when filling mags. They are quite sloppy to fill and the gas gets sloppier when they are full. 

       

      If its not that then I have far better results with Plastic nozzles. 

    3. heroshark

      heroshark

      better with a plastic nozzle 

       

    4. Monkman

      Monkman


      Well just tried the silent fill o-rings, which were a bugger to put on, but sadly it's made the problem even worse...liquid greengas goes everywhere. I think I need new valves..but can't find any atm. :(

  3. Monkman

    Question: Can you run a non-TM midcap in a SCAR-L?

    1. Druid799

      Druid799

      With the wee mag adapter you can but you do loose the bolt stop function (which for me is the main reason I buy TM recoil Armalite platforms) 

    2. Monkman

      Monkman

      Righto...am thinking of getting a SCAR, but I already have x10 Mid caps.  While the bolt stop function is cool..it's not the main reason I would want a TM.  Mag adapter!  Ok, Cheers Druid.... :)

  4. Monkman

    Damn..just been put forward for a new job..£10k more than on I'm on right now..but I love the people I work with, the location and the shift patterns...but new job means every weekend off..so more money for Pew Pew and playing every weekend.....I've put in for it!  :)

    1. Show previous comments  4 more
    2. Game Cam

      Game Cam

      Awesome mate, best of luck!

    3. AshOnSnow

      AshOnSnow

      Best of luck buddy! I’m trying to get a new job too, but have to shell out £100k first!

  5. Monkman

    Really had to say no to a TM SCAR L today.....Can't justify spending more £££ on another gun..do I really need 4 rifles?

    1. Show previous comments  1 more
    2. Prisce

      Prisce

      Only 4? That’s some heavy slacking! In my first 12months of playing I accrued 24 RIFs... it’s taken me another 18 months to slowly cut that number down. 

    3. sonofsammo

      sonofsammo

      24. Good effort that man!
      Although tbf, at my current rate of accrual, I might meet you at that.
      14 so far since February..... eek!

    4. Duff

      Duff

      You boys need a drug habit to help you stop buying RIFs!

  6. Monkman
    I am old and wise... and I can say that I am not a 'spunktrumpet'..lol Only in certain circumstance will I use it..mostly, probably for shock & distraction. It will probably get very little use..but it's fun!
  7. Monkman
    Please don't hate me...but had to buy one! Can't wait to test this 40Mike out...comes with an awesome patch. (Also got the ASG Storm grenade fixed...realised it also fits perfectly into my BMW drinks holder...lol)
  8. Monkman
    Ordered a scope for £99 from them..was on back order. Changed my mind and cancelled it..got refund to my credit card the same day. No issues and quite helpful over the phone.
  9. Monkman
    Mine didn't work...lost all it's gas by the time I went to use it...when I re-filled it it was leaking out the bottom.
  10. Monkman

    Well that ASG Storm 360 I bought is a pile a shit..filled it up, went to use it in a cqb scenario..found it lost it's gas.  Went back to re-fill it, noticed gas leaking from the bottom.  Still wouldn't work, refilled it again but leaking was worse, liquid was just spurting out of the bottom.  What a waste of £50!

    1. Rogerborg

      Rogerborg

      Sorry if this is a stupid question, but have you checked that the valve core is secure?

    2. Monkman

      Monkman

      Not sure, but I did take it apart as I thought maybe an o-ring was broken, but both top and bottom o-rings are ok.  Lubed them and put it together again..still leaks.

    3. Rogerborg

      Rogerborg

      God dammit.  Bloody airsoft gear, I'm thinking of switching to Nerf.

  11. Monkman
    Dammit...I've done it again! Bought 2 weeks ago...G&G TR4-18 and added my bits to it. (Acetech Predator tracer, Element AN/PEQ15, Elcan Spectre clone 1x4 with red dot sight) and on yesterday I got myself a ASG Storm 360 Grenade...(Went with the green weenie..as it'll be easier to find in the dark) also traded in the Nuprol Holo sight I bought 2 weeks ago (It sat wonky on the rail of the G&G TR4-18) and upgrade to a Vortex Strike Eagle 1-6x24 Scope which sit's on the awesome ICS MARS. An expensive day...and I had to say no to the Tokyo Marui's they were un-stacking from the shipment crate at JDAirsoft.... but I was tempted to either finance it or stick it on the credit card...lol but I grit my teeth and walked out...until next month!
  12. Monkman

    Just a heads up... JDAirsoft has just received some Tokyo Mauri stuff, it's up on their website! Would've bought one there and then..but just paid for a Vortex Strike Eagle 1-6x24 Scope and a G&G TR4-16 two weeks ago. (Scope going on my ICS, which I'm going to convert to DMR)

  13. Monkman

    Went to JD today to put one of my guns in for warranty repair and to buy some bits & bobs...Walked out with another new gun.  Dammit all to hell!!!!   ?

    1. Show previous comments  2 more
    2. Monkman

      Monkman

      Just a G&G TR4-18 in Tan...wanted something for CQB, so new Tan holosight to go with it also...already have a Tan AN/PEQ15.  Pimping...and pretty cheap as they had a 10% off everything that day.

    3. Druid799

      Druid799

      Sweeeeeet !

      dont knock it bud , a fair few ‘seasoned’ S’ofters look down on combat machines but if your after a gun for a specific job then it’s the perfect choice for the job . ?

    4. Lozart

      Lozart

      @Druid799 the TR4-18 is a Top Tech, not a Wombat Machine. Good guns, nice choice!

  14. Monkman
    I have another tool which allows me to remove the muzzle break & tighten the castle nut on the Buffer tube...I noticed it also as doubles as a tool to remove the nut under the delta ring. (Noticed it only after I was looking in my tool box for other options to remove the nut after I bent the 'cheese' tool) The nut came off pretty easy with my other tool, require a bit of force...but was fine! That shitty tool I bought, no word of a lie..I can bend it with my fingers when holding it in one hand!!!
  15. Monkman
    Bought a "DELTA Ring tool"...........didn't last long! & A replacement barrel for my ICS CXP CQB HOG (As I stripped the muzzle threads) Well..decided to take off the Delta Ring from my M4 today, so broke out the tool I bought from Fire-support. (Am thinking of putting a Mk18 rail system on it, but want to take apart the front end of the M4A1 today to see how it came apart) Long story short, the "Airsoft Pro M4 Delta Ring Tool (Steel)" is really made of 'cheese'...It bent without hardly any pressure. After looking at it and holding it, I can bend it with one hand!!! The "Steel" is of very low quality and made of soft steel. If buy tools, don't buy this product... My fault, I should've spent more money on a decent one, but thought for airsoft, it would be ok...but no! Have contacted Fire-Support telling them that product is crap!
  16. Monkman
    New tactical light turned up today... My Tokyo Mauri HK45 Tactical is now complete...
  17. Monkman

    I'm in the market for a new CQB gun and I'm thinking of two options, either a Mk18 M4 or a HK 416.  Below are two examples that intrigue me. (Tokyo Marui's are just a little expensive atm...)

     

    Anyone have any experience with either of the below options?

     

    1)E&L  Mk18 MOD1 M4

    https://extremeairsoft.co.uk/shop/assault-rifles/electric-aeg-rifles/m4/el-ar-mk18-mod-1-m4-aeg-elite-rifle/

     

    2)G&G GT Advanced TR4-18 (HK 416 clone)

    https://jdairsoft.net/assault/12/g-g-armament-gt-advanced-tr4-18-light

    1. Show previous comments  3 more
    2. Druid799

      Druid799

      In your shoes if I can I always try to scrape the beer tokens together to buy another gatt that’s basically already to go if I can . I find if I’m after a very specific gun I’m never truly happy with my own build but if I can get one ready built from a retailer ? 

      The specna

      £183 from Gun-fire.

    3. Druid799

      Druid799

      Or how about this one from TG ? Wrong stock but you can pick up crane stocks for peanuts ?

      http://www.taiwangun.com/en/electric/cm-091-p-j?from=listing&campaign-id=19

    4. Monkman

      Monkman

      Thanks for the suggestion guys...gonna wait till next payday, spent to much this month on bits & bobs... :)

       

  18. Monkman
    I've been tinkering and pulling it apart constantly, learning how the thing goes together...I have a potential trigger contact issue, so when I get a free day..i'm going to delve into the mech box. Also i've not been the kindest to it out on the field..it's had two dunking's in water and caked in mud several times. The forward RIS is starting to wobble a bit, so need to find out a way of making it tighter than a Yorkshire man! My ICS on the other had is treated like a goddess....anyone who looks at it the wrong way, gets their throats ripped out. (Ok made that bit up..but i'm a lot more careful with that one as it cost me £390)
  19. Monkman
    Yes I do.. But it's getting a little tired. I've moved onto a sexier, younger model now...tight and sleek..and oriental.
  20. Monkman

    Was at RIAT today to watch da planes...found a RAF Regiment stand and got to play with some guns...OMG! I cannot believe how good the Elcan Spectre x4 optic is on the L85A2...me wanty one!!! (I have  clone Elcan and love it...but the real thing..shit hot!)  I just need around £2k I suppose to buy one..lol

    1. AshOnSnow

      AshOnSnow

      Lucky! I’ve never seen through an Elcan. 

  21. Monkman

    Bugger...just got my rota for my new job and i'm working both Sunday's at two of my fav sites..Grrr! At least my 3rd fav is available on a day off!  Time to break out the lights & lasers and hit some dark dark tunnels!! 

  22. Monkman

    Is .30g BB in a 350fps ICS MARS with Prommy purple & flathop to much to ask...or stick with .28's?  I seek wisdom from the Elders... :)

    1. MisterG

      MisterG

      It was too much for the APE, .25s and .28s seem to be the sweet spot for it.  Is the MARS similar enough to the APE?

    2. L3wisD

      L3wisD

      .30s with a prommy and Prowin (standard nub) in mine no problems.

      Mine chronos at 330. 

       

      I found the purple better with the standard nub than being modified into a flat version

    3. Adolf Hamster

      Adolf Hamster

      try it, if it can lift it then it'll be good, although the problem with heavier ammo is the bb travel time, but it's the choice we all have to make.

  23. Monkman
    Nothing sexy this week..but seeing as it was "hotter than hell" last weekend, I ended up ditching the chest rig...but had issues with where to carry my mags. Had a couple on my belt..but wanted to carry more, so just ordered this US Govt issued M16 x6 mag bandoleer, to carry a few extra mags when I wanna run light during the summer days.
  24. Monkman

    Tried the CXP M.A.R.S out yesterday and wasn't to impressed with the flathop and .25's..after lunch I decided to dump all my mags and refill with .28's..WOW!! What a difference it made...going to try even heavier ones as well next time.  :)

    1. Adolf Hamster

      Adolf Hamster

      i tend to find flat hops to be a bit finnicky, sure they're perfect when they're set right, but a gnat's fart is the difference between too much and not enough.

    2. ghostwalker

      ghostwalker

      run mine with a prometheus purple bucking and nub on .28 bb's and find it shoots brilliantly

  25. Monkman
    We're taking a few guns to use tomorrow... A&K Mk46 ICS CXP CQB Nuprol Delta with M320 nade launcher ICS CXP MARS TM HK45 Tactical TM Mk23 ???
×
×
  • Create New...