Jump to content

Asomodai

Members
  • Posts

    3137
  • Joined

  • Last visited

  • Days Won

    35
  • Feedback

    100%

Everything posted by Asomodai

  1. Mine arrived! Well... one of them did! The other one, which was picked up at the same time from Gunfire inexplicably didn't make it on the truck. Hoping for early tomorrow as I am in At least my battlebuddy/car wench gets his Cyma G36 Christmas present from me tomorrow!
  2. Just received the last part to finish of my stubby fat M4. The cookie cutter 5KU flash hider. Think it really rounds it off!
  3. Brand new TM EG1000 MAX long type motor for my P90 build. Not the greatest motor in the world. But perfectly fine for my needs. Reliable is the word.
  4. Same here for both my things!
  5. My two has been sent as well but the date indicated was the 12th!
  6. My second order has now been packed surprisingly.
  7. I cant find that notification but my first order is now shown as packed and ready for shipment. 2nd order is still in progress.
  8. My first 61716* and my second was 61773*. Just got to put up with it! I don't desperately need anything in the orders for another 2 weeks.
  9. If I remember right, it did say when I ordered that nothing would be shipped out til Monday. I just ordered another RIF today and the order number is up by about 600 more then the order I made on Friday... So I may need to wait a bit longer to see the second one!
  10. Cheers for letting me know. I might just go with a new piston assembly but we'll see how good the compression is out of the box. I'll take this discussion to its own thread. A year ago I bought a new Swiss Arms F2000 harness, which turned out to be a P90 one. At least I have a use for it now!
  11. Sorry about the questions. Did you replace the O-Ring or the entire piston? Luckily I picked up the SHS nozzle myself. Do you recommend a particular motor? Cheers for the advice!
  12. Drunk me impressively remembered that V6 Gearboxes are the easiest to work on. Did you end up replacing the compression parts or did you PFTE it up? Any other bits you think I should order? Worth getting a better hop unit along with the bucking and nub? Worth changing the motor or do you think the 14:1 gears will suffice? For £75 quid brand new cant go wrong with the P90! Though it apparently is 400FPS out of the box.
  13. Drunk purchase from last night. My brain decided that I needed to learn how to work on a gearbox and decided to buy the following: CYMA P90 CM060B. Specna Arms 14:1 Gearset. Element 6mm Steel Bushings (Should have bought bearings). Xcortech XET304u Mosfet SHS P90 Air Nozzle FMA P90 QD Sling Mount Element Gearbox Shim set. 2X SHS M90 Springs Going for a high speed build, not sure whether to short stroke and go for 11.1v or just go with a standard 7.4v high speed build. Considering I have never worked on anything like this before probably will go 7.4V. I also have a TM Aug barrel that will go in this. G36 to M4 Magwell conversion adapter One point bungee sling Dump Bag for my SL8 Low Caps. 11.1v lipo with deans.
  14. The SE Tour is taking in three sites, 3 weekends in a row starting on the 18th! Ace Combat (Kent), Cool Under Fire (Kent) and Battle Paintball The Zoo (East Sussex.)

  15. Put in a small order of a cheap Cyma G36c and a mushroom shaped Flash Hider at midnight last night. Mine status is currently at processing, will let you know if it changes.
  16. Picked up a Cyma CM.011 G36c as Birthday/Christmas present for my SE tour Battlebuddy. I do not drive and without him I wouldn't get to see so many sites, never takes a penny for fuel or the dart charge despite offering every weekend. He loves the armed police look so I know he's been ogling the G36c. It might arrive a bit hot on the FPS front though! Let's hope the compression isn't great ? Also picked up a 5KU Cookie cutter B flash hider for my thicc boi M4 to complete the blocky look.
  17. "FPS don't make much different to range" is a phrase I have believed in for some time and that it's all down to the Hop unit and barrel quality. 

    But I couldn't believe my TM Aug HC yesterday. I changed the barrel to a Prommy tightbore and used the same TM bucking and nub. Hop unit almost on full, FPS was chronoed at just over 250 on .2 (I was using .25's so it was about 211) Yet I was flinging out BB's accurately about 10 metres further then my mates upgraded EVO running at 330 FPS

    This thing is ridiculous. 

    1. Show previous comments  4 more
    2. Katana

      Katana

      FPS is important though guys. If you have the exact same setup but one gun has a higher fps, the amount of energy the bb retains in the higher fps gun increases and so the bb will travel further. People get confused between the relationship though. The only reason you should be using a higher fps is to effectively use heavier weight ammo to retain more energy for longer. 

       

      Prommy barrels aren't magic on their own but the tolerances the barrels are produced with are very consistent + the material is better than stock barrels.

       

      Flat hops work very well because it allows heavier ammo to be hopped much more effectively by increasing the surface area contact with the bb. Unfortunately, the only way to see these benefits is to in fact use the heaviest weight ammo you can. 

       

      It's not so much that fps is important on its own, but it helps everything else take more effect.

    3. clumpyedge

      clumpyedge

      Should have really clarified... FPS means nothing unless your hop is decent and is married up with a decent nub and rubber. Yes FPS is key but unless you get the first part right you could be shooting 450 but not able to get your ammo more than 30m

    4. Rogerborg

      Rogerborg

      Imagine what your TM could do it if it were shooting at 1J rather than 0.58J.

       

      Imagine what your mate's EVO could do it it had been upgraded properly.

  18. Latest SE Tour Review is up! Bush Valley Airsoft! 

  19. Hey gents. I hate M4's but I jumped on this one last year as it was going cheap brand new at a local shop. (ICS CXP-15 Proline metal). It was a pistol style only M4 with no stock. I bought it to be upgraded straight away. Prommy Tightbore barrel Maple leaf flat hop. ICS Metal Hop unit. Short stroked piston. New spring. New ICS pistol grip (Old one broke during the upgrade process, the new style grip needed a lot of fettling and swearing from my tech to go on) Mosfet. ICS QRS Stock SRU foregrip Holo sight. Canted Ironsights (Because they look kickass.) Managed to blow the fuse first game as it was the one for 7.4 lipos, need to get the 30A. Also the ICS high caps weren't feeding fast enough in full auto so had to use my Nuprol midcaps. I also have the Mag short midcaps, which looks better do you think? If I am to use the Mag short midcaps i'll need to get a stronger spring for them to feed well. For an M4 it looks alright... I guess...
  20. Playing with an M4 for the first time today. I won't enjoy it, I won't enjoy it...

    1. Show previous comments  6 more
    2. Prisce

      Prisce

      Wasn’t my intention. I’m not that sort of person. 

       

      But if your firing enough for the hi cap not to keep up, you must be doing a lot of full auto.

    3. Asomodai

      Asomodai

      Or the ICS High cap mag is generally known for its weak springs :)

    4. djben9

      djben9

      what M4 was it?

       

      tbh, ive never had issues with the fuses on mine, they have always seemed fine in my AEGs

       

      on ICS hi-caps, my brother uses them all the time, never had any issues but tbh where we play its mainly semi for the majority of the time anyway so not overly used, and on ICS AEGS

  21. Next review is of Bush Valley this Saturday in Kent. Let me know if any of you're going and we'll meet up. Only £15 quid walk on, special rate as its the first game since a closure and remodel. 

  22. Picked up a couple of TM M92 Mags... £60 Picking up a Nuprol M92 Retention paddle holster soon as well.
  23. I Swore off doing site reviews or playing Airsoft at all beyond the AFUK Mall game this month... However the Mrs just told me to have fun next Saturday...I really do want to try out either Hockley or the newly re-opened Bush Valley. Watch this space ;)

  24. My New TM U.S M9. Adjustable hop unit, no pesky rails. Perfect to masquerade as a PAMAS for my French loadout.
  25. My second pistol. The TM M9 US. The bestest M92 model ? Its the closest to the PAMAS French Beretta copy that I can get with an adjustable hop. Which completes my French loadout.
×
×
  • Create New...