Leaderboard
Popular Content
Showing content with the highest reputation on 22/06/24 in all areas
-
The 'What have you just bought' Thread
Jacob Wright and 3 others reacted to JinxDuh for a topic
4 points -
Gun picture thread
Pinovic and 2 others reacted to gavinkempsell for a topic
3 points -
I've seen some (iirc) 75 ranger guys using blue cans, with blue mags and their BCG is also blue, it's to show as training. UK Police use blue (Two tone blue) Glocks to show training too, can see a fair few pics of blue glocks in holsters for ARV/CTFSO etc.2 points
-
1 point
-
WE AK105 GBBR: Zenitco Special
Convert reacted to Pigeon_Haris for an advert
This advert is COMPLETED!
- For sale
- Used
This started life as a WE AK PMC Fixed Stock Receiver, which has been converted into a AK-105 length front end with all parts replaced with Zentico where possible Built using a mash of different Brands, it took a painstaking amount of hours to figure out and modify to the WE reciever, but fitment is rock solid Front Muzzle to Rear: External Internal 5KU Zenitco DTK-2 Muzzle Brake LCT AK105 Gas Block 5KU Zenitco B31 Upper Rail 5KU Zenitco B30 Lower Rail CYMA AK74 Gas Tube 5KU Zenitco B33 Dust Cover Zenitco RP1 Charging Handle (Permanently affixed) W&S Classic Style AK Selector 5KU Zenitco RK3 Pistol Grip Russian Thunder Genuine Fixed AK Stock Adapter 5KU Zenitco Gen 2 PT1 Stock Maple Leaf Crazy Jet 250 mm Inner Barrel Maple Leaf Wonder Hop 70 Degree WE Brass Short Stroke Adapter WELL Steel Trigger unit provided as spares for stock unit) All of these parts have been modified to fit the WE AK, mileage may vary if you look to use these in another build down the line Also included: 4x Magazines in 5.45 Style 5x Magazines in 7.62 Style (1x Boneyard as spares) A complete classic 105 furniture kit (you will need a folding reciever to use the stock however All of the original furniture A Midwest industries branded dovetail mount A Replica of a classic standard issue Russian AK Sling Some miscellaneous spares and extras that will try and dig out Condition: External wear from its time skirmishing indoor and out, rather AK like, bumps and scratches throughout shoots, feeds, and hammer drops on empty, please note the mags are intermittent with the hammer drop tab, so I mostly run it with it off Internals are in good condition, the hammer has been replaced with a WELL Cast Steel Hammer The outer barrel was rather sloppily chopped down by me, the gas block is mostly held in by pressure fit, the front sight might tend to wander left or right from time to time, a simple zip tie keeps the gas block in firmly place, the messy barrel cut is only noticeable when the front end is disassembled Build Cost comes in around £1000+ including magazines Asking £525 All in Open to Offers/ Trades w/ cash on top for any other GBBR of intrigue Payment: Paypal (Parcelforce 24 1st Class Track and Signed for) or Collection (W Yorkshire) Part out (Gun and magazines)/Swaps/Exchange: No/No/No Additional Information: Very Solid Performer, with the dice roll that is the current state of GHK QC, WE was a decent alternative if you're still going for steel externals These come out the box with VSR barrels unlike the GHK, so you can get really decent accuracy without breaking the bank on custom CNC hop conversions These get a bad rap because of the butt ugly PMC furniture these ship with (which I feel almost entirely killed these being popular) as well as the being full stroke, the spring loaded brass half stroke adapter puts this on par with all other options on the market in terms of snappiness and recoil impulse Please note: this is a heavy beast, with attachments moreso, so please make sure you are getting plenty of protein using this thing Please Feel Free to PM me or Text on 07967057776 if you require any more information Thanks for looking shooting video attached:£525
- GB
1 point -
Sorry guys, no video, she's had me building a patio all day. 😒1 point
-
Multi shot. On semi 🤣
Hotweeweejef reacted to Rogerborg for a topic
D'oh, yes, I missed that. One hail-Mary to try is drilling a very slight detent into the top of the hop chamber, directly above the feed tube. A few gentle-pressure turns with a 6mm drill bit put up the feed tube, just enough to create a little inverted dimple that BBs can seat into. This fixed, or seemed to fix, a similar issue on my MP5K, although as with anything airsoft it might just have been sorted by another round of disassembly-reassembly. (Detouring...) No worries, and you're right to ask because it's not obvious. What your gun is telling you is that the motor can draw enough current to over-spin, and will do so if the battery can supply it. By using a lower-C battery to fix that, you're now in a situation where the motor is trying to draw more current than the battery can provide. It's probably marginal, and many players are likely in the same situation without even realising it. However, you might find is that the battery heats up with use. It's not likely to become seriously toasty, but it'll be shortening its life to some extent. I mean, it's really not a huge deal in the grand scheme of airsoft lifetimes or costs, but I'd keep an eye on it for any signs of puffing up or alarming overheating. The tl;dr version is that ideally you want a battery that can comfortably supply more current than the motor can draw, and that you fix the double-shots another way, e.g. checking for a worn cut off lever, using an active-brake mosfet (although this then increases strain on the motor), or even by a mechanical bodge like limiting the trigger travel so that the trolley can disengage faster (I've used a blob of hot-melt glue between the trigger contacts to achieve this).1 point -
This advert is COMPLETED!
- For sale
- Used
SOCOM Gear “The Hitman” (Leon) Beretta 92F. Only used for display and very occasional plinking. Lovely pistol, full metal, correct trades on the compensator, and “The Hitman” and “No Women, No Kids” engraved on the slide. Shoots perfectly, no issues. Also comes with a set of Guarder Beretta grips, plus originals. The Guarder ones are a little thinner than the originals so the screws are a tiny bit loose, these could be shimmed out but it’s not bothered me. Comes with x2 mags, original and silver(original has slight leak from fill, will hold gas for a week though). £115 posted£115
1 point -
Hmm. It's cheap because it has a plastic gearbox, and is running at under half the power of a typical metal gearbox AEG, which likely means a light spring and a cheap motor. However, as you only need it to get the dimensions right then it should do the job. It even sounds like it has a modern rotary hop unit rather than the older dial style - both types of unit are interchangeable, and taking TM mags is a good sign. One consideration is that even the cheapest CYMAs come with a basic NiMh battery and charger, which will let you test the shooting performance. The Double Bell does not, so you'd have to spend extra on a battery and charger, which will push the price up by a surprising amount. It's a pity you're not in the UK or I'd have sent you a M4 from the spares box. That 42K LARP looks amazing, I'll look into that - thanks!1 point
-
Custom paintwork
nighthawkkhan reacted to Cannonfodder for a topic
Many older posts will have had the pictures deleted as the forum limits the number of pictures members can post so, as mentioned above, try going to the newer posts. Alternatively there's quite a few painted guns in the gun picture thread1 point -
All together it was £96, with return next day postage.1 point
-
Custom paintwork
nighthawkkhan reacted to JinxDuh for a topic
Did you go deeper into the thread? A lot of the first images are removed.1 point -
This advert is COMPLETED!
- For sale
- Used
Hi Selling my WE M712 gbb pistol. In very good condition. Comes with 3 gas tight mags, plastic stock/holster, and some real wood grips that will need ‘fitting’. £200 also available is a real wood stock/holster that takes the gun in with the 20rnd mag inserted, unlike the plastic one. It will need some fitting with a needle file to attach to the M712, which I have started already £80 thanks jay£200
1 point -
This advert is COMPLETED!
- For sale
- Used
EMG utility compact SAI Brass weighted rear grip SAI barrel and thread protector SAI knurled RMR cut slide High contrast raised Glock sights Pink rear sights trijicon logo High contrast glow post trijicon logo Gold adjustable trigger Holosan 507c red dot sight Inforce APL-C clone light Enhanced recoil spring Short stroke buffered 48hr post£210
1 point -
It's marketed as a speedy boi gun so I assume that's the target demographic.1 point
-
Well, that's....a choice. Also - you don't need to start spamming new threads for the same pics you've already posted elsewhere.1 point
-
A guy walked into his friend’s office He found his friend sitting at his desk, looking very depressed. "Hey, what’s up with you?," he asked. "Oh, its my wife," replied the man sadly. "She’s hired a new secretary for me." "Well, nothing wrong in that," he said, "Is she blonde or brunette?" "Neither. He’s bald.1 point
-
The 'What have you just bought' Thread
Enid_Puceflange reacted to gavinkempsell for a topic
So... I don't just collect pews, I collect webbing/fieldgear/ bergens etc. Had my alice for a while & got some Molle II in ACU/UCP last month so here's some pics of those. This week I also got my hands on a DPM chest rig with a DPM holster for my plce & a pattern 58 water bottle pouch to complete a set I've had since last year. I've been after a WE L85A2 GBBR for a short while but spotted this ICS Galil on Firesupport & figured I had a few L85's already but no Galil (until now). Straight out the box the front sight post had worked it's way loose from the sight body so once it's 'zeroed' I'll lock tight it in place, the gas tube is a bit wobby so will see if I can tighten that up too.1 point -
Care packages 📦 ideas
Enid_Puceflange reacted to nighthawkkhan for a topic
Just for laugh I once made Giraffe Camouflage 🦒 on my G&G CM16...1 point -
Your delta is lose , front sight off with the gas tube and tighten it up making sure the gas tube can go back in , you might need barrel shims but most times they arnt needed. Your delta is lose , front sight off with the gas tube and tighten it up making sure the gas tube can go back in , you might need barrel shims but most times they arnt needed. Edit- how liverpool ish are you ? I'm south wirral ( ellesmere port )1 point
-
I have a two tone airsoft rifle can I cover the blue without ukara?
ak2m4 reacted to Cannonfodder for a topic
That would be fine as the tape is temporary, I'd recommend the self adhesive stuff as it won't leave a sticky residue when removed. Something like this https://www.military1st.co.uk/28301b-mfh-fabric-self-adhesive-camo-tape-5cm-x-4-5m-od-green.html?gad_source=1&gclid=CjwKCAjwydSzBhBOEiwAj0XN4F76tE9X9PqYJAF1BRYZY-iqKCJ2CljeG7VIk4CILjWGaylylL3iqRoCumAQAvD_BwE Personally I wouldn't paint the parts as the blue will start to show though when the painted parts get dinged and scratched through normal use1 point -
Multi shot. On semi 🤣
Rogerborg reacted to Colin Allen for a topic
Just to get some clarification, could you put up a video of this "lobbing 2 or 3 out the barrel. Not actually firing per se, just kinda throwing them out." Is the gearbox cycling twice or are two shots coming out on one cycle? Yes, that could be problematic. I would have taken two off the pickup.1 point -
1 point
-
I have a two tone airsoft rifle can I cover the blue without ukara?
ak2m4 reacted to Cannonfodder for a topic
Welcome to the forum Nobody has a ukara licence, they don't exist. Now I've got that out of the way on to your question. By cover the blue do you mean temporarily while playing or permanently? The former is absolutely fine and can easily be done with a roll of sniper tape. If you mean permanently then IIRC it's technically illegal but if you can show you're using it for playing airsoft (at a proper site, not dicking about in a mate's garden) and don't do anything stupid with it you'll be fine1 point -
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
M9/M92F Aluminium Slide & Frame Marui Beretta. new- already assembled RRP: £157 https://www.fire-support.co.uk/product/guarder-aluminium-slide--frame-for-marui-m92-black£85
Welwyn garden city
1 point -
I need help to find the functional parts for a custom 40k airsoft
Rogerborg reacted to vonHohenstein for a topic
For the emperor! That's really cool. I'll send you the link as soon as the files are ready. At first I need to buy a M4. The CYMA are 100€, the Specna Arms 175€. So the choice is simple. I found a "Double Bell M4" for 55€. According to the description it has a V2 Gearbox and can take any TM compatible magazine. So it's also compatible to CYMA/TM? 55€ sound a lot better than 100€, especially considering I'm going to take it apart anyway Have you ever heard about "42k LARP"? That seems to be EXACTLY your interest. Maybe it's worth a trip to northern Germany.1 point -
SIG Air/VFC Para Bellum Custom P320 WC 3.9" GBB Pistol (Black / Bronze)
enzo47 reacted to PAJC_AIRSOFT for an advert
1 point -
The shooting parts of airsoft M4s are mostly compatible and interchangeable, being based on reverse engineering Tokyo Marui guns. All[*] M4s use the "V2" gearbox, which is as close to a standard as anything in airsoft, and the lower receiver, pistol grip, motor and hop units and barrels are also largely interchangeable. That's why it doesn't particularly matter what you use as a base for development. If the printed parts fit on any M4 lower, then they should fit on every[*] M4 lower. I suggested CYMA as they're cheap, tough, globally available, and a de facto standard. It's easy to get lost in airsoft makes and models, and get decision paralysis. However, as adjustable power is a (sensible) goal, as an end user I'd be more likely to choose something with a quick change spring system as a base. Since half the base gun is going to be discarded anyway, a Specna Arms SA-F03 FLEX (for example) would do fine. It's really down to local prices and availability where you are - I mention Specna Arms as those are cheap and readily available in the UK, but it really won't matter what you get as long as it's TM / CYMA compatible. This really is relevant to my interests, by the way, I play in Astra Militarum gear and have long been on the lookout for exactly what you're proposing to replace my current half-arsed solutions. [*] There are exceptions at the higher end, like Systema, but the bulk of M4s are TM / CYMA compatible.1 point
-
1 point
-
1 point
-
5.1 Custom Hicapa
Jez_Armstrong reacted to Rogerborg for an advert
1 point -
1 point
-
Macks airsoft dreamers of the week thread
Pigeon_Haris reacted to JinxDuh for a topic
Never seen a game, only shot in my Nans friends aunt's cousins uncles brothers back garden. Shoots like a laser will easily outrange teh bestest snipers! It's fully upgraded with every part £700 buyer pays fees, postage and for the box it comes in!1 point -
This advert is COMPLETED!
- For sale or swap
- Used
Afternoon, Bought this from another seller here in the hopes of getting into HPA but I’m not gonna get around to it; the external assembly of the gun to make it into an ‘M16’ was misleading, there’s wobble and jank to it. The RIF fires and functions as it’s meant to, but the front handguard has no gas tube to align the grip and no barrel nut to keep the barrel locked in place so there’s twist in it. Stock is absolutely rock solid but the butt pad needs love. The carry handle needs attention as well. One really cool thing is the handguard and stock are REAL M16 parts, and everything else feels snappy just like a Tippmann should I would like to see this in the hands of someone who knows Tippmann’s and will do it justice… or use it for parts. Comes with 3 mags, looking for £250 inc postage, will consider trades. Any questions please ask I will do my best p.s. previous previous owner informed me it’s a V2£250
Mitcham - GB
1 point -
Gun picture thread
k.a reacted to frontsight for a topic
1 point -
0 points
-
I still have the issue on a 7.4 20c. It's not overspin (unless the arl is catching on the gears, hmmm) I'm going to rebuild it shortly anyway, might need a new switch carrier if it's not disconnecting the semi properly.0 points
-
Mws Tm L119A2
Wavey_Gravey reacted to HallyMadd for an advert
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
This is my mws tm L119A2 build it’s got 7 mags with this all work fine and leak free! Comes with everything in the picture! Genuine ergo grip but haven’t put it on yet Genuine pts stock 3 tanned p mags 1 normal p mag 3 stan mags angrygun rail with 10.5 barrel And as original barrel and for grip with this!£900
Liverpool - GB
0 points