What have you made?

[MiK]

  On 27/03/2021 at 13:03, Adolf Hamster said:

 

i'm assuming from the context you're making something with molle yourself, so the ability to move a pouch up/down is probably not relevant given you're gonna be putting the strips where you want them anyway.

Expand  

Yea, I’m finally getting down to making my reverse bandoleer since most plate carriers don’t fit this chunky monkey that well ;| 

[Adolf Hamster]

  On 27/03/2021 at 13:17, MiK said:

Yea, I’m finally getting down to making my reverse bandoleer since most plate carriers don’t fit this chunky monkey that well ;| 

Expand  

 

i know the feeling.

 

i just use belt rigs, i'm not worried about stopping actual bullets and i have enough frontal padding without adding several inches of carrier and mags on top

[Tackle]

  On 27/03/2021 at 13:17, MiK said:

Yea, I’m finally getting down to making my reverse bandoleer since most plate carriers don’t fit this chunky monkey that well ;| 

Expand  

While I'm all for a bit of "tinkering", why make a molle bandoleer when there's already a few on the market, some of which are fairly cheap but still well made, & as for the back, well just get two & put them together ?.

Personally, I love the bandoleers, been using them for years, got 3 I think🤔, & knowing how much stitchwork goes in to them, I'd never try to make one, not a cost effective use of time & materials.

[MiK]

  On 27/03/2021 at 13:50, Tackle said:

While I'm all for a bit of "tinkering", why make a molle bandoleer when there's already a few on the market, some of which are fairly cheap but still well made, & as for the back, well just get two & put them together ?.

Personally, I love the bandoleers, been using them for years, got 3 I think🤔, & knowing how much stitchwork goes in to them, I'd never try to make one, not a cost effective use of time & materials.

Expand  

Three words Tackle that simply sums it up

 

“Bored in Lockdown”

 

Time wise : it isn’t taking that much time actually stitching it but it’s taken a wee while getting amongst it and the plus side of it is that it will actually fit me perfectly with adjustable options.

Cost wise: since I bought most of the materials over the whole of lockdown this last year and mostly in “sales” I think I’ve spent like £100-ish on all those materials and I have enough to make another bandoleer or a full plate carrier, a couple of ghillie tops/hoods/gun wraps for my rifles which was the original idea but the reverse bandoleer has kinda taken over my first project

[Shamal]

  On 27/03/2021 at 13:24, Adolf Hamster said:

 

i know the feeling.

 

i just use belt rigs, i'm not worried about stopping actual bullets and i have enough frontal padding without adding several inches of carrier and mags on top

Expand  

Haha snap! 

[Druid799]

  On 27/03/2021 at 12:39, MiK said:

@TheFull9 Cheers matey, I thought as much but I’ve seen on tinterweb some plate carriers that don’t have a gap between the strips - not counting the laser cut panels - cuts down on the crafting by a third \o/

Expand  

I’ve been making kit for a good few years now and I find the best way too mark out the molle spacing is have a sheet of card with spacing marked on it that you’ve then cut with a craft knife on each ‘stitch’ line that you mark through on to the material in one go . I found if you mark up each line as you go along It’ll always go Pete Tong and you end up with crooked molle strips ! 🤦‍♂️

[Tackle]

  On 27/03/2021 at 14:07, MiK said:

Three words Tackle that simply sums it up

 

“Bored in Lockdown”

 

Time wise : it isn’t taking that much time actually stitching it but it’s taken a wee while getting amongst it and the plus side of it is that it will actually fit me perfectly with adjustable options.

Cost wise: since I bought most of the materials over the whole of lockdown this last year and mostly in “sales” I think I’ve spent like £100-ish on all those materials and I have enough to make another bandoleer or a full plate carrier, a couple of ghillie tops/hoods/gun wraps for my rifles which was the original idea but the reverse bandoleer has kinda taken over my first project

Expand  

 

  On 27/03/2021 at 16:04, Druid799 said:

I’ve been making kit for a good few years now and I find the best way too mark out the molle spacing is have a sheet of card with spacing marked on it that you’ve then cut with a craft knife on each ‘stitch’ line that you mark through on to the material in one go . I found if you mark up each line as you go along It’ll always go Pete Tong and you end up with crooked molle strips ! 🤦‍♂️

Expand  

Maybe you two should get together & start an old ladies sewing circle 😜

[Druid799]

  On 27/03/2021 at 20:06, Tackle said:

 

Maybe you two should get together & start an old ladies sewing circle 😜

 

Expand  

Terence Walter Arthur Thomas !🤦‍♂️

[MiK]

Heheheh @Tacklemight be a idea of asking/getting @proffrink to set up new section/corner  “Sewing with @Druid799 & @MiK“

 

I’m almost done with mine, just need to decide on the back panel - solid or strapping,  if I want to put a radio holder on the back shoulder and some place for a patch or two.

[HuttArmouries]

So the co2 cartridge tag launchers cost £600+ and I really dont feel like paying that so this project has begun. 

[Adolf Hamster]

i feel like i need to ask the obvious question here, but how are you planning on that fitting in a launcher?

[HuttArmouries]

  On 02/04/2021 at 12:26, Adolf Hamster said:

i feel like i need to ask the obvious question here, but how are you planning on that fitting in a launcher?

Expand  

Im building my own launcher around this shell. It will be a permenant part of it and front load like a gp25. the line goes to an external thing with a chamber for co2 cartridges and a regulator. 

[Adolf Hamster]

  On 02/04/2021 at 12:35, HuttArmouries said:

Im building my own launcher around this shell. It will be a permenant part of it and front load like a gp25. the line goes to an external thing with a chamber for co2 cartridges and a regulator. 

Expand  

 

fair enough, i'm guessing the tag shells don't have any fancy shenanigans for resetting them then.

 

any particular look you're going for or just straight functionality?

[HuttArmouries]

  On 02/04/2021 at 12:37, Adolf Hamster said:

 

fair enough, i'm guessing the tag shells don't have any fancy shenanigans for resetting them then.

 

any particular look you're going for or just straight functionality?

Expand  

Im probably gonna go for something vaugely eglm looking. And the tag shells dont actually seem to need resetting and even if they do I can just make the trigger have enough travel to do it. This sort of smooth plastic look with the metal underneath. Id like it to look nice but function is more important

Also planning a standalone stock but this is probably gonna live on my ak102 most of the time

[PopRocket123]

Folding monopod grip for sniper and DMR stocks

[MiK]

Whilst I wait on my cotton delivery for my bandoleer, I decided to finish another part started project a full mesh face mask that actually covers my mush properly  

[Enid_Puceflange]

At first glance , all I thought was that you were going LGBT Due to all of those pretty little clamps holding it together 🤦🏻‍♂️

[HuttArmouries]

Got bored waiting for all the little bits of hardware for my grenade launcher to arrive so I made a basic sight arangement for it. This is more of a prototype. Ill make the final one from aluminium. with some sort of adjustment method. For now though Im just going to zero it for 50m and bolt it down. 

 

[PopRocket123]

I seem to be spending more time designing than actually printing at the moment

[HuttArmouries]

Now fully functional. 8 full power shots from 1 co2 cartridge set at 450psi. Now its a matter of trimming the tube to make it more compact and bulding the launcher around it. 

[Druid799]

  On 06/04/2021 at 11:45, PopRocket123 said:

I seem to be spending more time designing than actually printing at the moment

Expand  

Oooohhh ! I’m liking that !😍

 

 

  On 02/04/2021 at 21:44, MiK said:

Whilst I wait on my cotton delivery for my bandoleer, I decided to finish another part started project a full mesh face mask that actually covers my mush properly  

Expand  

Can I have the one with all the colours around it ? Will go absolutely spiffing with my Bizon ! 😇

[PopRocket123]

  On 08/04/2021 at 19:49, Druid799 said:

Oooohhh ! I’m liking that !😍

 

 

Can I have the one with all the colours around it ? Will go absolutely spiffing with my Bizon ! 😇

Expand  

Funnily enough I'm not happy with it. I'll have another go at some point, see if I can do better. 

[Druid799]

Not a particularly epic make just a small alteration to make a rig more useful to me . I’m not a great user of pistols always carry one but vary rarely extra mags so the ones you often find on rigs aren’t much use to me . Bought a mini rig of @lucaslu1709on theses very forums (cheers bud👍) which had two pistol mag pouches on the front , so split the two centre seams on the elastic , stripped the webbing panels off the front of the pouches then stitched two sections of elastic to make one single and used the shock cord from the top of the pistol pouches to make the bottom retainer . Simples ! 

 

[PopRocket123]

Not as impressive as all your custom rigs and holsters but here's mine. My partner goes through hairbands like you wouldn't believe so I took a couple of the stretched out ones and used them to secure my grenades to my belt. The spoon goes through the molle and the hairband goes over the top and hooks on the pin. They're nice and secure now and, with a bit of practice, just as fast to unhook. 

[Druid799]

  On 13/04/2021 at 00:39, PopRocket123 said:

Not as impressive as all your custom rigs and holsters but here's mine. My partner goes through hairbands like you wouldn't believe so I took a couple of the stretched out ones and used them to secure my grenades to my belt. The spoon goes through the molle and the hairband goes over the top and hooks on the pin. They're nice and secure now and, with a bit of practice, just as fast to unhook. 

 

Expand  

Now that is a good idea ! 👍