Jump to content

Gun picture thread


M_P

Recommended Posts

On 23/09/2024 at 19:53, mightyjebus said:

For the "older" airsofter who's eyesight is quite what it used to be.

image.thumb.jpeg.13f4399c48dc4a014ea144d649b64f3f.jpeg

Ohhh, another one :D

 

I wish that collapsible stock/top rail was available for purchase, I could really use it on mine :D

Link to comment
Share on other sites

My Glock Collection so far...just need to find a KJW G26 so I can use a green guarder frame I got on the forum, swap the cut lower on the Glock 17L for a standard frame and get a green gen3 18 and should be done for now. How many is too many, is there a number in this hobby?

IMG_20241004_124411.jpg

IMG_20241004_124233.jpg

IMG_20241004_123912.jpg

IMG_20241004_123701.jpg

IMG_20241004_123501.jpg

IMG_20241004_123025.jpg

Link to comment
Share on other sites

On 26/09/2024 at 13:16, Alimcd said:

Got to be the UH-1 on that build for me.

 

Picked up a new stock to further stubbify my stubby AR build. The steel bolt feels like it’ll dislodge fillings with the extra compression the the short buffer tube gives the recoil spring!

IMG_4859.jpeg

IMG_4861.jpeg

 

Nice is that MWS? what adapter is that? Thanks.

Link to comment
Share on other sites

Finally got around to doing the thing - WE hi-speed split G17 slide on EMG SAI frame. Shame I won't be using it any time soon :mellow:

Very happy with this for now though!

ResizedImage_2024-10-05_02-39-43_1323.jpg

IMG_20241005_010540.jpg

IMG_20241004_220948.jpg

IMG_20241004_220925.jpg

IMG_20241004_221320.jpg

IMG_20241004_221049.jpg

Edited by B4by_Dr1v3r
Link to comment
Share on other sites

Finally got around to picking up the handguard extension for my SCAR-H DMR. After all the pain of fitting it, I'm not sure I prefer it over the shorter version I was rocking, simply for where the grip and Masterkey now sit (which are a bit too far forward).

It's ironic because it was the PR I wanted originally but I couldn't find one at a decent price. Still, it gave me a chance to redress the cam on the rifle and take some shots along the way. Feeling much better now. 😁

 

20241005_161904.jpg

20241005_161917.jpg

20241005_161831.jpg

20241005_164422.jpg

20241005_165722.jpg

20241005_170641.jpg

20241005_170744.jpg

Link to comment
Share on other sites

Hot off the back of my ghillie stuff, here's something completely different: The Arasaka JKE-X3 Akaoni Carbine Prototype. It's loosely based on the JKE-X2 Kenshin from Cyberpunk 2077 and was built to compliment my 'Cyber Ninja' loadout I've been using recently. Definitely not to everyone's taste, but it might float a boat or two.

 

It features: Sound-activated electroluminescent wiring, multi-coloured LEDs in the grip, a sound+IR activated round counter, a muzzle flash tracer and few other nice touches. All-in, 6 different power sources 😆. Built on the SSE18 platform.

20241006_151504.jpg

20241006_151557.jpg

20241006_151527.jpg

20241006_192714.jpg

20241006_192647.jpg

Edited by Sifu Steve
Grammar
Link to comment
Share on other sites

  • Supporters
On 05/10/2024 at 17:34, Sifu Steve said:

Finally got around to picking up the handguard extension for my SCAR-H DMR. .... where the grip and Masterkey now sit (which are a bit too far forward).

 

 

RR.gif.d4c01fef1058bf05679c7764a8324b27.gif

Link to comment
Share on other sites

4 hours ago, TheFull9 said:

I can only guess the batteries in the optic, PEQ, tracer and display screen, go on and tell us the other 2.

The RIF itself and the LED torch unit in the front grip cavity. The PEQ has the battery pack for the electroluminescent wiring. 😉

7 minutes ago, Lozart said:

 

RR.gif.d4c01fef1058bf05679c7764a8324b27.gif

What? You don't think a gas 6-shot shotgun is an elegant solution for the minimum engagement distance? It's quicker than drawing a sidearm, has a better hit probability and sounds awesome. What's not to like? (Other than it contributes to the 6.6kg overall weight, making it somewhat front heavy 😆)

Link to comment
Share on other sites

10 hours ago, Sifu Steve said:

The RIF itself and the LED torch unit in the front grip cavity. The PEQ has the battery pack for the electroluminescent wiring. 😉

What? You don't think a gas 6-shot shotgun is an elegant solution for the minimum engagement distance? It's quicker than drawing a sidearm, has a better hit probability and sounds awesome. What's not to like? (Other than it contributes to the 6.6kg overall weight, making it somewhat front heavy 😆)

I honestly hate everything you build. Keep going

Link to comment
Share on other sites

15 hours ago, PopRocket123 said:

I honestly hate everything you build. Keep going

Challenge accepted. I'll win you over with my next project, I'm sure. 😉

Link to comment
Share on other sites

Letting a mate borrow the A1 for a battlesim this weekend, have dropped it back to the short barrel to make it a bit easier for CQB and swapped the stock as the old school one is getting loose. 
 

Would love to have just an interchangeable set of upper receivers for this but it’s a nightmare because I’ve had it front wired. 
F9EBFDD8-79A3-42ED-AC93-16A08C188135.thumb.jpeg.ff30f51558a573c579ddadbc7a805011.jpeg

Link to comment
Share on other sites

42 minutes ago, GothicGhost said:

 

Thats's really nice, what Guarder kit did you use and did have to do any modifications?

 

Thank you.


this kit - 

 

IMG_9455.thumb.jpeg.fd692b81bb90c77d9953ebd2d83524b0.jpeg

 

minor fettling , the only “modification” for these is the BBU unit , but it’s all very simple and straight forward . Other than that , just take your time , give everything a good grease then run it in :)

 

 

 

Link to comment
Share on other sites

Added a small red dot to the GBB SD . Put a few mags through it yesterday and it shoots very nicely. Only did a rough hop set , but there is plenty of adjustment left so I can obviously go heavier than the .30's I run in all my GBB kit.

 

Chronod it , and it was a tad 'warm' that was outside with a mag that had been used once and refilled so the mag was cold and with red gas.

Fitted a spare restrictor disk that was in the draw and it was then at .90 j in a cold garage on green gas. So should be nicely skirishable at that. A warm mag or red gas will pop it just over the 1.0j mark . It's basically doing the same figures as my MP7 , so happy with that. 

 

I plan to look at fitting a tracer unit into the front of the silencer, but will need to work out what length inner barrel I'll need as the existing one runs full length. That will be a project for over the winter, I'll run it as is for now.

 

Oh and ordered an AW drum mag for it from KY , will report on what that is like once it turnes up.

image.thumb.jpeg.abed23cac374353252d2ecb4cee67e88.jpeg

 

image.thumb.jpeg.bd2159509a4ad6d1e12fb19186cd8963.jpeg

Link to comment
Share on other sites

1 hour ago, Nick G said:

Added a small red dot to the GBB SD . Put a few mags through it yesterday and it shoots very nicely. Only did a rough hop set , but there is plenty of adjustment left so I can obviously go heavier than the .30's I run in all my GBB kit.

 

Chronod it , and it was a tad 'warm' that was outside with a mag that had been used once and refilled so the mag was cold and with red gas.

Fitted a spare restrictor disk that was in the draw and it was then at .90 j in a cold garage on green gas. So should be nicely skirishable at that. A warm mag or red gas will pop it just over the 1.0j mark . It's basically doing the same figures as my MP7 , so happy with that. 

 

I plan to look at fitting a tracer unit into the front of the silencer, but will need to work out what length inner barrel I'll need as the existing one runs full length. That will be a project for over the winter, I'll run it as is for now.

 

Oh and ordered an AW drum mag for it from KY , will report on what that is like once it turnes up.

image.thumb.jpeg.abed23cac374353252d2ecb4cee67e88.jpeg

 

image.thumb.jpeg.bd2159509a4ad6d1e12fb19186cd8963.jpeg

Needs a torch setup 😜 I found this the other day and printed it, very handy 

20241013_173145.jpg

Link to comment
Share on other sites

21 hours ago, JimFromHorsham said:


this kit - 

 

IMG_9455.thumb.jpeg.fd692b81bb90c77d9953ebd2d83524b0.jpeg

 

minor fettling , the only “modification” for these is the BBU unit , but it’s all very simple and straight forward . Other than that , just take your time , give everything a good grease then run it in :)

 

 

 

Oh wow, that’s nice!  I’m very tempted now.

Link to comment
Share on other sites

A2 stock arrived today - which means I can finally run the torch frontend & actually plug a battery in at the same time, which is nice. Have a clone C-More railway coming in soon which'll probably go on this if it suits it enough, alongside one of those abhorrent modern cocking handles because the proper ones won't be in stock until next year [according to an email I sent airsoftpro.cz, we'll see] and adjusting the hop without being able to lock the bolt to the rear is a massive pain in the ass lol

spacer.png

Also got a forward assist & replacement bipod for the SR-25 too.

spacer.png

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...