-
Posts
214 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Status Updates posted by matas17
-
Anyone else is disappointed in IWA 2024 with all airsoft releases and big plus that G&g LevAR seems like an April fools joke...
-
anyone ever ran into an issue where theire PTS EPG grip motor screw would loosen itself over time and cause your motor height to go down
-
@ak2m4suprising dont have that issue on my DAS GBLS or my tm ngrs but on my aeg it loosens up as i shoot so odd.
-
Any idea if Warrior drop leg holster accepts pistols with flashlight. Such as FNX-45 or a hi-capa
- Show previous comments 2 more
-
Ah, yeah, my bad. The answer is the same though, for @Lozart's reasoning. It's way too snug to fit a gun with a flashlight on it.
-
ran into an issue where my tm fnx45 mags started to leak out of a base plate. anyone got any solutions. I already tried to heat up orings in hot water, had some silicone on them etc. No idea what to do
-
@RogerborgManaged to get it sorted by using cylinder head oring that was just perfect size, only issue i had was trying to tap the pins back in but got it after few tries.
-
I wonder does Vortex lifetime warranty covers 2nd hand purchases?
-
where did dark mode on website went, sometimes it works sometimes it doesnt
-
Anyone know where to get SA58/FAL mlok handguard, been trying to find one for days now.
-
How come this Bolloksitsmeee spammed entire forums and nothing is done about him so far?
- Show previous comments 7 more
-
Not gone lie but he sounds like some 18 year old wanna be airsoft youtuber type.
-
Has anyone ever put tracer unit inside Angrygun surefire socom mini 556 suppressor before and if some which tracer fits?
-
Good Evening all,
has anyone noticed how sometimes pts epm mags for tm ngrs m4 sometimes fall out due to recoil or is it just me. I replaced spring on mags catch but wondering if I need new mag catch now or something.-
try inserting your mags slowly and watching the mag catch, does it actually move? Are you sure it's actually been locked into place? If not or not fully, check inside the mag well, it's likely something is in there (Wedged bb etc) that is prevent the mag going all the way in. When I had this issue it was down to mags not actually catching.
Also if you have changed the mag release to an ambi one, are you sure you aren't just activating it accidently while moving around. you go to use it and the movement of the rif encourages the mag to fall out.
-
@EmergencychimpsOh trust me mags lock most of the time but sometimes i noticed the randomly fall out without me even pressing mag release button. One thing I've noticed is that pts epm mags have a lot of movement side to side inside magwell once they are inserted in and locked in with mag catch. So what I'm thinking is I might maybe get some velcro and stick it in on one of the sides inside magwell to reduce the wobble. Maybe that's why the mags fall out randomly while shooting.
And funny thing is standard tm ngrs mags work perfectly never fall or and have minimal wiggle(side to side) but epm's have a lot more.
-
-
Bought broken vfc mp7 aeg and after few weeks of waiting for trigger micro switch i got it back to working condition with perun ab++ mosfet, bullgear cnc tappet plate and gear clip and entire aeg rewired to work with mosfet apart of mag cut off feature which was removed due to known feeding issues. Rest of the aeg works as intended at 285fps on 0.25g bbs.
- Show previous comments 1 more
-
@Rogerborgany wiring that was left in the gun was basically removed. Those VFC mosfets are known to burn out like this one did so i removed all of the wiring and replaced broken trigger micro switch with new one and soldered in Perun ab++ which works much better. Also that hop unit wiring and the small spring inside hop unit together with that small chip were removed. I pretty much fixed all known feeding, fps or reliabity issues with the aeg and it works much better then i expected.
-
@Rogerborgthey love to overdo things as always. For example the main board that trigger micro switch, and hop unit bb detect feature connects to is attached by 1 screw to the gearbox shell, that 1 screw is all that gives any kind of rigidity to the board and honestly its a bad design as i barely bent mine and it broke off. They must of had few or tens of mp7's pass qc test so they continued on manufacturing but somewhere along the line something went wrong. At least they hop design actually lifts bb's up to max of 45+ metres from what i tested with such a short barrel. But I might replace it in a future together with bucking and nub. But from all the work I've done to the mp7 it's now reliable and can easily use 11.1v lipo with programmable mosfet which comes in handy, since I mainly use semi and 2rd burst on my aeg's.
-
Anyone know where to get SA-58 quad rail like OSW model has or similair length.
-
@Lozartwish i could find m4 stock adapter for it there is one from Czech republic but doesn't ship to uk sadly.
-
Did anyone bought anything from gunfire recently, I'm wondering how much did customs charge you?
- Show previous comments 3 more
-
I am looking into getting SA58/JG 3000 and I cannot find one either used or new anywhere in UK in stock. I asked on forums, Discord groups, etc. So this is why I am asking about gunfire as they have it in stock and have replied to my email saying they ship to UK but I just wonder how much will Custom's charge me for importing it.
-
Anyone know anything about JG Sa58 what version of gearbox it uses or their mag compatibility.
- Show previous comments 6 more
-
@Druid799How is it out of a box, I wonder what the internals are and if for example pistol is plastic and doesn't have steel teeth, etc. Also how is trigger response, fire rate and the range on it?
-
Anyone know where I can buy midcap replacements springs ?
-
How is compatibility between 1911 and hi capa series?
- Show previous comments 4 more
-
@SteveoceeI wonder if feeding nozzle and blowback housing are compatible and slide catch
-
@matas17 shoudl be as slides between the 2 are interchangable.
-
https://cults3d.com/en/3d-model/art/airsoft-smg-body-kit-mpx-inspired?fbclid=IwAR0Nfp7zvtW9aFUjDfXssq-svTj7HCvPOOAGBhoQ0FR5H79aGWgGndpLj14
Im so tempted sadly dont have a printer to do so- Show previous comments 5 more
-
@Trixxeo Need to find someone who would be willing to print it for me. since im sure youre busy
-
afraid my printers are going nearly 247 for mostly personal stuff. got half an ak front end going on them atm! issue is I use the least desirable filament to most. that being PLA+. its prints the best and gives nice smooth models, but isn't very heat resilient. 60c and it softens.
best for a gun body would be ABS. way stronger with a way higher melting point. this time of year your talking about very well heated rooms (30c+) or complete printer enclosures. ABS also loves to warp. nothing like a 20 hour print that fails near the end because the corner starts to curl up!
-
@Trixxeoheat wouldn#t be a problem to me as i mostly run my aeg's on semi only and i wouldnt even print pistol grip that is included and would use my own
-
Quick question for everyone how do you send your airsoft guns within the UK? I am looking to send my Hi capa to England from Northern Ireland