Lozart

That's fine if you happen to have a 500fps rifle to hand. Otherwise you're only ensuring you can't shoot yourself in the eye and let's face it, if you're doing that you've got more issues than just your eyepro!

And the award for best use of airsoft guns and gratuitous sauxy minx goes to....

You still have to get caught first...

Easy tiger, I'm sure there's things you wouldn't know where to look to find out. It's a perfectly good question. Lukataylor - All "proper" safety eyewear has to meet minimum impact resistance standards that are set by the relevant authorities in the area of sale. For example the picture posted above sets out quite nicely the standards laid out in the US for safety and ballistic eyewear. The standard that needs to apply for european manufacture is EN166. Look for Medium impact or EN166B (http://safetyspecs.co.uk/BS%20EN%20166.htm). A lot of cheap "safety" eyewear is only rated to EN166 F which is not high enough to resist impacts from 400fps sniper rifles for example. Goggles are usually higher rated than glasses (with the exception of military specific designs such as Bolle Tactical for example). There is NO standard testing for mesh goggles or glasses. As such you can only really go on recommendation and just not buying cheap crap.

Hmm....sounds hop related to me but without seeing it I can't be totally sure.

I'd say it's sitting a little too far forward. Bearing in mind the sorbo will compress slightly under pressure from the spring.

What bbs are you using?

Problem there is that serpa holsters are generally made for real world weapons. The hi capa isn't terribly realistic....

Actually amazed that nobody has posted this link yet: http://www.airsoftsniperforum.com/43-longrange-aegs/892-holy-grail-building-your-dmr-aeg.html There does seem to be two schools of thought on DMRs in airsoft; boost the fps and lock to semi on ANY gun you like and call it a DMR or use an actual DMR style RIF and do the same thing. Personally I fall into the latter camp. I can't see why you want to "DMR" an MP7 but some do so there you have it. Plenty of sites seem to have a lower FPS limit for semi locked AEGs than for bolt action sniper rifles so you need to decide if the slightly better range is worth the loss of being able to auto the crap out of someone that really needs it lay down suppressive fire.

Sorry, misunderstood at first! How about this: http://www.uktactical.com/p-5597-warrior-molle-harness-multicam.aspx with the PLB belt (plus pouches of course) http://www.uktactical.com/p-4438-warrior-plb-belt-multicam.aspx

Some makes of chest rig can take a molle back panel. My WAS 901 has one, seen a few on Military 1st.

I've used the Airlab pad in two of my guns. If the piston is too far back you can trim a bit off the black part with a sharp knife. Still does the job.

By "people" I didn't mean you. If you do a quick search of the forum you'll find many a sandy vagina about this subject!

Still a lot less than it would cost for the same gun bought here though. I really don't get why people get so wound up by this.

The Mall staff are pretty good for this. I got told by one of the marshals that I'd been hit on the shoulder strap of my chest rig. Hadn't felt a thing! Which much like yourself, got me to wondering how many other times it had happened and made me look like I wasn't taking my hits!

This. SeniorSpaz may well be along to correct me but there DOES seem to be a higher than average incidence of douche-itis among our American counterparts. Not sure why that is to be honest. Granted the internet IS a breeding ground for all that is wrong with society (prejudice, entitlement, the list goes on...and on) and there is a spectacular level of mong on certain airsoft based FB groups this side of the pond too but the worst of the comments I've personally seen online have been on US forums etc.

Is there any visible damage? How cheap are they? What's their impact rating?

Fondue set?

Several members here have reported feeding issues using g&g midcaps in g&g guns, specifically the guns that come with a midcap as part of the package. If you have had no issues then that's great but don't assume that others are wrong just because their experience differs from yours.

I would, but it's the day before my birthday. I have other plans

Dammit, now I wish I was going!

Maybe part of the perception is that there's SOOOOOO many different models of Glock on sale? Every "pistols" section seems littered with them...