Jump to content

Aunty Pasty

Members
  • Content Count

    176
  • Joined

  • Last visited

  • Feedback

    N/A

About Aunty Pasty

  • Rank
    AF-UK Regular

Profile Information

  • Guns
    WE M92 Beretta (2 tone)
    CA G36K
    GHK G5
    TM M&P 9
    GHK AK74
  • Gender
    Not Telling
  • Location
    Woking, Surrey

Recent Profile Visitors

2,132 profile views
  1. Aunty Pasty

    We m92 slide stucks?

    Yes it isn't supposed to stick to that degree. Normally there is an extra click at that position but should not stick. Have you been lubricating the mechanism?
  2. Aunty Pasty

    Lowering a KWA GBB MP7A1's fps?

    The 144A gas should be enough to reduce your fps and is the easiest option. Alternatively you can fit an adjustable gas nozzle to lower the fps.
  3. Aunty Pasty

    New player in Watford

    Hi, and welcome. I started in my early 40s too so don't worry about the age thing. I tried Red 1 Airsoft last weekend which is also in Watford just off the M25. Look them up on Facebook. I thought it was pretty good there but pretty hard going due to the heat. The morning was CQB in an old school followed by woodland games which also tended to be at CQB to medium ranges.
  4. Aunty Pasty

    ICS MP5 A5 Will not fire

    Are you sure the motor spindle is engaged with the gear in the gearbox? You may need to adjust the height of the motor.
  5. Aunty Pasty

    S&W M&P which make?

    I've got the TM M&P9 and think it's very good. However there are a few niggles. Sometimes the slide doesn't always get pulled all the way forwards when you pull and release. Normally it's ok but there is a sticking point in the action where if you don't pull it completely back there isn't enough power in the spring to get over it. Also the plastic stick which holds the grip in place may become loose and fall out. I lost my original so with my replacement I put a little piece of tape on it to hold it in place.
  6. Aunty Pasty

    G36 Recommendations?

    My classic Army G36k is quite decent. The fps is a little on the low side out the box but it shoots very consistently. Decent construction and full polymer body.
  7. Aunty Pasty

    Is airsoft getting too expensive ?

    Indeed. It does depend upon the person and what they can afford. Airsoft retailers and sites are businesses so need to make money to cover their costs. There's no obligation to make hobbies / sports affordable to low income people. As it is, airsoft is relatively cheap for a day out after the initial expense of getting kit.
  8. Aunty Pasty

    Glasses + mesh mask

    It is possible for a bb to end up behind the lens although very unlikely. It happened to me once and that was with a seal at the bottom as well. I think what happened was the bb struck on the edge of me eye socket and bounced straight up squeezing between the rubber seal and my skin. I think the bb did touch my eye but by that time there was no energy left in it to cause any damage.
  9. Aunty Pasty

    Small Detail Painting

    Try wiping away the excess with just water rather than nails polish remover. I think figuring painters use ink to run into the creases which is a lot thinner.
  10. Aunty Pasty

    Impulse101 (Japan)

    Recently tried Impulse101 http://impulse101.jp/en/ which had a few TM parts that I was after. Generally a lot cheaper than the UK but you need to factor in international postage and Paypal fees. Buying was relatively straight forward and as mentioned, payment is via PayPal. Delivery for me was 5 days for a small package. Recommended if you're having trouble sourcing genuine TM parts.
  11. Aunty Pasty

    Lightening the load - battle belts.

    I considered a battle belt at one point but ended up getting a lightweight chest rig instead. Also it makes me look slimmer. I also paired it with a drop leg holster which I hated straight away and ended up sending it back. I now use a Fobus plastic hip holster If you haven't used one before it could be a case of try before you buy.
  12. Aunty Pasty

    What bbs to get?

    I tend to stick with ASG blasters as they're decent quality and cheapish. I've tried zero-one own brand bbs. IMO they have a higher than average chance of breaking in the barrel which isn't a good thing. I've heard bulldog bbs aren't much cop but no personal experience. I've seen various videos which suggest they have small bubble inside which may throw off their trajectory.
  13. Aunty Pasty

    Brand new player here

    Welcome. I started the hobby on my own and still tend to go solo. The first place I went to had an online booking system but most woodland sites will be able to accept you on the day if you're a walk-on. As you'll be going for the first time you'll probably want to rent so booking first to make sure you have a gun to play with is advisable. Some have a website. Others may do it via facebook. Don't be afraid to talk to others there. Many will relish the chance to show off their stuff to you.
  14. Aunty Pasty

    Sci fi loadout and custom gear

    I suspect at close range I suspect your plasticard will get shredded. At home I once decided to do some indoor shooting by firing into a normal plastic bucket. It wasn't long before some of my shots managed to punch a crack into the bottom of the bucket.
  15. Aunty Pasty

    Broken WE G36 Gas Blow Back

    I can't see very well from the pictures but if it's the bit that scoops the bb out of the mag and into the hop then a strong epoxy resin should do the job. If it's the nozzle itself I recommend getting it replaced.
×