.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
sp00n
-
Posts
2,210 -
Joined
-
Last visited
-
Days Won
21 -
Feedback
0%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by sp00n
-
car break disks £100 car brake pads £35 car exhaust £170 . . . . . airsoft - MTP issue trousers £30
-
wow they never had them in stock long ... then again they did only get 5 in and i took 2. when i originally contacted them, they got them within a week iirc.
-
look here >> http://www.airsoft-forums.co.uk/index.php/topic/17294-ians-guide-to-noobism-on-a-tight-budget/
-
firesupport stock the mag lips
-
from hobby king - 2x Turnigy nano-tech 1300mah 3S 25~50C Lipo AIRSOFT Pack
-
TM less then 300fps ... but not much say 270 - 300
-
Good choice on the g&g mate To be honest the is no "best bb", makes I would go with are asg blasters, blaster Devils or g&g's As for weight 0.2's are the norm, 0.25's will get you better range, better foliage penetration, (very) slightly better wind resistance, but will travel slower and cost more. I use 0.25's in my cm16
-
From reading this and your other post, i can see that you really want your own rifle. And i know you want to fit in with your mates etc, but the advice you have been given in this and the other thread is based on experience. wait save up and get a proper rifle. just out of interest what rifles do your mates have???
-
once you do the standard AEG piston/sector gear mod, they are as reliable as any other AEG. and that mod is only advisable if you don't want the pre-cocking feature or you want a high speed setup
-
while i cannot provide any concrete evidence, i do know of an individual who was a WE disturber, who was apparently selling SMG8's to his mates for cost ... around the £100 mark -
arrr sounds like you may have what i had with my G&G SR25. If you have, you have managed to lock it up in a magical place, torn between firing and the trigger reset (that's what the clicking is, the trigger resetting). The only cure as i found out was to drop the motor out, get a screw driver and either manually turn the bevil gear until it fires, or see if you can release the anti-reverse latch. hope this helps
-
Is the gun semi only?
-
(shamelessly stolen from Mack )
-
before you do that, dose the top of your mag look like these pics? Your slide pin should look like this when inserted (sorry the pics are not that brilliant)
-
very interesting point. but just for the sake of my lack of knowledge on this subject, you have your gun set for 0.28's and the site chrono's @ 0.3's (yeah i know its only a small difference), but would that not make your gun chrono hot? as from reading your original post, you set your gun for 0.2's, and found when using 0.28's you had the same FPS .... forgive my asking (and lack of knowledge) but would it matter what weight ammo you chrono'ed at as it seems you get a very similar FPS no matter what weight of bb's are used. unless you are saying that you should set your gun up for 0.3's (for the chrono), then use 0.28's (in the game) ... in which case that makes sense to me or have i got the wrong end of the stick?
-
great gun, my raider L DST is coming up on 2 years old, other then cleaning the barrel and charging the batteries, nothing has gone wrong with mine at all My only complaint with mine is its too long in my view, i should have got the standard length raider , that said atm i am trying too see if i can source a firehawk top end/barrel as according to G&G it will fit .
-
so i enquir'ed to G&G "how much for a fire hawk top end/barrel to replace my CM16's top end/barrel" ..... for less then £40 i could buy a complete fire hawk!!!
-
for all you prepp'ers out there
-
blackhawk patrol belt ... large
-
if its venting out the barrel it sounds like a issue with the 3 way valve in the nozzle
-
ordered stuff from 2 places one by royal mail, paid extra for other one by next day parcel force .... both dispatched on the same day ..... guess what arrived first!!!
-
looks like this have also just bout one off these
-
wooooo hooooo payday!!! TACTICAL COMBAT ASSAULT CARRIER MOLLE VEST MODULAR SYSTEM AIRSOFT WEBBING BLACK cargo work trouses bottle of 0.3g blaster devils 2 off G&G SR25 120rd mags m4 speed loader
-
is it emptying all the gas out of the barrel? If so it sounds like it could be an issue with the 3way valve in the nozzle not closing. it should look some thing like parts 21, 22, and 23, from page 14 of this manual http://manual.weairsoft.com/GBB-Pistol/HI-CAPA-5.1.pdf
-
is the slide retaining pin in place?? (stupid question i know)
