sp00n

The inner barrel I meant

Check the barrel to hop alignment, some times the barrel can slightly rotate in the hop, meaning the hop puts pressure on one side of the bb meaning the bb will shoot to one side or another etc

balls so i found out that the 16awg is too thick to fit, so plan B use the existing wires ... all was going well until i had to feed the wire into the buffer tube .. the wires on my fet are too short to connect as per original, and if i have the fet on the other side, there is no room for the fet. plan ....errr c ... try thinner 16awg wire EDIT :- have just ordered a pack of ASG Ultimate silver plated Wire ... need to stop spending money now!

so let me get this straight, you get better education, free prescriptions etc etc ... and you think you should get more?? yeah you are right some people are lazy gits, and what you are forgetting is if you do turn down jobs, after so long you loose dole etc (or you did when i had a 2 week spell many years ago might have changed now). what he wants to stop is people benefit flocking to britian ... I got a tax statment recently, and a 3rd of what i pay goes on other peoples "welfare", not mine. The benefit state needs to end.

the problem i have with the snp is they seem to blame everything on Westminster and plz keep salmon!!

Like you say Scotland is a part of the UK, its like my arm ... i like my arm, its part of me ... i don't want it to leave me i like Scotland, i like that its part of the UK, why would anyone want you to leave??? off topic a bit but why do you need a regional government? seriously i have never understood that. PM if its along answer i don't want to derail this thread my issue with sturgeon is one minute she wants to be out of the UK ... next she wants to be in uk government in some form. as for where its run from, its run from the national capital ... which isn't any or the cities you listed, hell in my view it should be run from the dead center of the UK. you keep saying that Scotland has things dictated to them, have you ever thought it might be the people you elect that's the problem ... isn't gordon brown a scot?? he didn't do a lot for you when he was PM for a brief period as far as i am aware (feel free to correct me if i am wrong here). from what you are saying it sounds like you need to stop and listen to everything farage says. if you don't think immigration is a problem, that's fine. ignore that part .. but listen to the other stuff too.

i'll bite have a look here >> http://www.parliament.uk/briefing-papers/sn04033.pdf This is a .pdf from parliament/westminster which shows on average ppl living in Scotland get more per head spent on them (15%) soo you pay Westminster more and get more back ... why can't we all just get the same! as for farage, i don't consider him racist, he speaks the truth as far as i can see, if the truth is racist then soo be it. He wants to stop ppl coming here living on the dole in mansions getting handouts/paid more then i earn and contributing nothing at all, if you listened he wanted a similar thing to Australians point immigration system. why should we give foreign aid to a country (lets take India for this example) that has just sent a space mission to mars ... we cannot afford to do that! And alot of the other countries only use the money to spend it on arms, while there people are starving ... we seem to give more every year, yet every year more are starving, notice a pattern?? as for sturgeon, it amazes me only a while ago how she was trying her damnedest to get Scotland out of the UK ... now she wants to run it .... No .. just No cameron/miliband are almost the same ... its like which colour do you like best blue or red??? clegg is just a cameron wannabe imho I hate Europe, The UK pay lots into it, yet rarely see anything out of it, you go Ireland and almost ever bit of motorway has a nice signpost "funded by the European community" Its time for a change. I will be voting UKIP

Yeah I am putting my 11.1v lipo idea on hold atm. Going to use my 7.4's might have a minor issue with there discharge rate 35 to 50c eeek That dsg Fire hawk looks nice, swap the motor out for say a lonex a1, easy 50+rps!!! As for my wires I have 16awg silvered silicone wiring for the motor, and the included wire for the pico AAB fet

i have a cunning plan, that could not be more cunning if it have been thought up by a fox who had just got his cunning degree from a cunning university my plan .... "check the box where i put airsoft stuff that i have bought" result :- so have glued bushing in place, and have sorted shimming out already To Do:- 1)soldering wires for fet/trigger/motor etc 2)reassemble gearbox and grease up! 3)testing 4)reassemble gun 5)stuff

more bad news for me (sorry the pics arnt much better) firstly the spur gear, if you look at the below pic, there is a strange overhang on all the teeth, if you look where the tapered part to the tooth face is you can see it. admittedly the other teeth don't look too healthy either. Nextley and probably a show stopper, if you look at the red circles blow, there is some sort of casting "pip" which is preventing the bushing from siting all the way home, and this bush can freely rotate, other holes are better though, but this is on the spur gear. i have tried to reassemble it, and shimmed it, but there is a bad noise when some portions of teeth mesh up. if i am honest i am really disheartened, as when i initially took it apart, it didnt look that dad at all .... /sigh EDIT :- 20mins later i attacked the gearbox shell with my leather-man and cut away the "pip"'s checked out all the other bushing mounts and made good etc etc, but it seems i will have to glue the bushing in as the bevel gear hole is loose ... and would you believe it my superglue has dried up *#$'

i am glad someone remembered my little review

Yeah mine is the Raider L the 357 I dunno they maybe didnt have the correct port or just just used a "standard box"

really crappy pic of my CM16 cylinder and one with measurements:- Edit :- i dont it keeps discussions alive

never had any issues with mine at all ... i will admit that my MK23 socom (nbb gas pistol) out ranges it. but you slap a 99rd mag in the CYMA CM030 ... its great fun watching people think its maybe a gas gun and after 30-40 rds they charge you ... oooh wait you have plenty of rds left

Thanks for the offer mate i am doing my upgrade "sequentially" (well thats what my mind thinks), i am sticking with the standard 18:1 gears, and a 7.4v lipo at first. then as i get board i can go down the 13:1 gears, swiss cheese piston, delay chips and 11.1v lipo etc etc. That lonex a1 motor is a bit of a beast, i have the A2, as i didn't want to send my gun back to the future the rate the A1 spins at

No probs mate, all posts are good in my eyes as for the shimming i use this guide i found http://www.actionsportgames.com/files/asg/products/manuals/16947_Shimmin.pdf i know it seems alot of faffing around , but the results are worth it lol That may have been an MP5K box, iirc thats what my old one looked like

already have new seals and nozzles on there way. AOE looks really good TBH, and there is only very minimal wear on the piston teeth. bushings - its getting a full set of SHS all steel bushings, as it just seems a waste to do 1 or 2 ... and the remaining may fail, so best to do all in my mind have shims and some rather nice guarder Teflon grease for the gears, my personnel fave if i am honest, and some silicone grease for the piston etc. to be honest, i am not going to spend any money going down the shortening barrel route (though a mate from my site said i could have the barrel bits of his old standard raider) as for the wiring, i dont think that the fet signal will be as much of an issue as locating the fet will be, as its a lot tighter then i thought, i may put it in the buffer tube and abandon my idea of eventually swapping the stock over .... ill have a think on it its the mid size barrel if i get it, though i did notice that the cylinder was quit heavily ported, i would go so far as saying that the porting is over halfway down the cylinder (ill take some pics)

iphone ... quality pictures

so a little history first, i bought my CM16 2 years ago now, and its been a bloody good gun! it has never let me down. Above is the pic i took when i first bought the gun, below is how its been for the last year and abit (yes before anyone asks i did get my UKARA and do away with the green paint). 2 years on and out of warranty, i figured "i am going to hell ... whats another sin" so time for some modding!! before i began down this path i did a lot of thinking and tried to put together a plan of action of the 2 things that i wanted to achieve and my reasons. 1) improve trigger response - i play a lot of CQB and a quick trigger response is always nice To do this i have replaced the motor for a lonex a2 which i had laying around, massive improvement!! i have, but have not yet fitted a pico AAB mosfet, a speed adjustable trigger, 16awg wire and deans 2) shorten the barrel - Moving in a tight environment, while is not impossible, it is more difficult with a long gun. i actually contacted G&G and priced up a fire hawk top end ... for £30 - £40 more than there quote i could have bought a new gun!! - so i am not doing this So One i had got all the bits i figured i need, i began the strip down ... and ran into my first problem As you can see the bearing is dead ... opening it upon reviealed some more bad news Yeap that bearing is dead ... and the bevel bearing too, from my experience its normally the spur bearings that go first In any case i suspect the issue was caused because all/most of the grease has gone hard/crusty ... which is not good! Other then the bearings everything else looks ok, the gears look fine, the trigger contacts have minimal wear etc etc The piston has minimal wear, same goes for the piston head ... the spring needs a bearing guide .... and i may chuck that guarder sp100 spring i have laying around at it. (To be continued)

so much for my "i am not spending any more on airsoft this month" plan cobra MT645 PMR radio headset for the above 2x ASG MK23 socom pistol mags 2x TM desert eagle mags 4x osprey pistol pouches

I have bought a fare few batteries from them, never had any issues. Sometimes there postage can be a bit expensive (£10 from Netherlands), so try and get from the UK warehouse if they stock the item, otherwise factor this in. Top Tip :- when you have found the item you want, don't just order it, leave the page open for a min or so and a box will pop up offering you the item slightly cheaper but it will only do this once (or so it says)

First time i went to under arm throw my Ohshiboom, it should have only been a short throw, 6ft or so ..... insted i completely totally and utterly failed. for some reason i still cannont explane, i just couldnt let it go and ended up throwing it straight up .... ohh the shame

you are indeed correct, they are loads cheaper, only issue is that seller is based in Hong Kong, it may take a week or so to arrive.

4x Turnigy nano-tech 1200mAh 2S 25-50C Lipo AIRSOFT hopefully these will be small enough to fit down my buffer tube (also ignore the mini tamya connector ... it will change )