sp00n

thanks for that mate, however i feel a little pi$$ed at them as they still owe me for a few bits , so i wont be trusting them again (specifically = SV-12 barrel end : 2790 yen)

anyone know of a decent TM parts supplier, for uncommon parts (i was using pulse until they went under) ​(please note i have tried uk retailers .... they don't seem interested though)

depends what you want, if you want a gas blow back pistol, then i am told the TM G18c is good/excellent (i have no experience with it) however if you want a g18c that works in all weather and has a 99rd mag, i urge you to consider the cyma g18c, the only drawbacks are its reduced fps (some say rang is reduced, but if properly setup, range should not be an issue)

cyma cm.030 G18c AEP ... with 99rd mag naturally

i had bought a well r4, 2hicap mags and a silencer, but it looks like the R4 is gunna have to go back, as there is something wrong with the trigger

thanks mate

you wont regret it far cheaper then pyro (even cheaper still if using shot gun primers ), i now have 2 ohshibooms .... and i was honestly considering a 3rd

gotta take advantage of ohshiboom's black friday Shock Colour Black 9mm Shotgun Primer Adapter Redesigned Shock Original Safety Pin and Ring

Has anyone used airsoftglobal.com? what was your thoughts? good/bad .. delivery etc thanks in advance

loads and loads of electronic components 4x ITW nexus 1" buckle 4x ITW nexus 1" ladderlock 4m Single Sided Crye Multicam MTP Camouflage Military Spec 25mm / 1" Webbing a pair of oakley tactical gloves in tan CYMA Glock Gearbox (CM09, AEP)

Have you tried emailing G&G part department? they are really really helpful (they sent me loads of exploded drawing when i was getting my L85 hop and barrel, and also offered me loads of different barrel options etc) and may have a longer version

i couldnt find a CM,028 for sale when i was looking, i ended up going to taiwangun

dont forget the old CYMA CM.028 series (AK47), cheap as chips, and a bloody good gun, i was well impressed with mine today, both in range and rate of fire (came with a battery and charger too)

use heavier weight bb's, due to there mass they take longer to slow down etc ... but the price will be reduced fps consider over hopping

if you watch it to around 2min 20's you can see him assemble the cct

kipkay used to have a schematic on how to do this, but its been taken off his webby , but the youtube video still exsists

Mine is using a attiny13a, basically a programmable chip. The resistor is across the diode to allows me to use the diode as a light detector, and shut down the chip to save power

i upgraded mine as i had lost the standard battery. have a read of my review/upgrade process .... might give you a few idea's >>>http://www.airsoft-forums.co.uk/index.php/topic/15563-tokyo-marui-mp5k-kurz-aeg/ as for parts .... errrrr it all depends upon what you would like to spend i am sorry to say. that said i would advise a strip down as its pointless spending money, if the internals are on there way out etc as a point of note, when i bought mine originally ... back in 1998, i think i paid £550 for it ...

arr a good old MP5K that's how mine used to look , they are a good gun, abit low on FPS (i only managed 250FPS on a SP100 spring!), but they do have a distinctive sound ... and i have not seen many on the field. (word of warning the standard box is only 6mm, so not the best for upgrades etc) as for the battery if memory serves me correctly, you need a 8.4v 1300mah stick (don't be tempted by the 1600's ... they wont fit ... or they didn't when i bought one .... best to measure up to be sure though) as for fore grip unless you can find a TM MP5K kruz fore grip, there isn't a lot of options, as if you fit the ris kit like i did you loose access to the battery-connector/hop adjuster area. and a standard MP5 forgrip is wayyy too long. That said by looks of it you have also lost your fuse holder and the majority of the mini tamyia connector When was the gun last serviced?

unfortunately my iphone cannot see IR, so this is a really bad video shot through my WM2 NVG's (but you should get a good idea of how it works)

after many weeks of pulling my hair out i have finally done it :- wtf is it i hear you ask .... inside its:- to sum it up its a IR "firefly" (beacon/strobe effect) with smart control, that means during day light it shuts down to save power this is only my first version ... i can program more led's to it if i want

correct, register and login price will be correct then