[New to Newcastle area.]

Hi there! I'm down the road a bit in Hartlepool. 

 

You've got several sites in the area:

 

NSC near the airport. Woodland gaming on a Paintball site. 

 

No limits - indoor CQB in Gateshead 

 

NTAC - small woodland site near Pittington 

 

Dirty dog - probably the main site in the area, a container village with woodland and open ground. Located at Shildon 

 

District 23 - similar to no limits. Billingham by the train station. 

 

Adrenalin - another Paintball site, near Richmond. 

 

Stirling airsoft - themed airsoft that tends to run weekend events around once a month, set on Catterick army base. 

[My T10 Jae 700 Build]

Can't speak regarding the individual sears, but I've been running my T10 at about 480fps for 2 years without trouble. 

[Sniper suggestions?]

Have a look at the action army T11 too. 

 

VSR based, so plenty of upgrades, 90 degree trigger as standard and they're about £160 new with a more modern look, if that's what you're after. 

 

Follow impulses upgrade plan and you should be good. 

[Tm vsr 10 g spec upgrade to 500fps]

490fps on what weight? 

 

Even on a 0.20 that's 2.2J. 

 

To get 1.59J at 490fps you'd have to be using a 0.14g BB, which don't exist. 🤔 

[Asg mk 23]

https://www.skirmshop.co.uk/mk-23-action-bar.html

 

To be fair, if it's the ASG MK23, you might be as well off just buying a new pistol for the price, or look for a second hand one. 

[50lb Two Tone Air Gun. Any Ideas?]

As above:

 

What?? 🤨

[Riot Shield.]

Something like riot shields are going to be very site specific. 

 

You'll have to ask the site(s) you're planning on going to to find out. 

[Sniper and DMR Single and Double Band.]

I've never heard of those terms. 

 

Where have you seen them? 

[The 'What have you just bought' Thread]

Try outdoor and Tactical. They don't do the super heavyweight ammo in bio, but you can get Geoffs naturals up to at least 0.45g.

 

https://www.outdoorandtactical.co.uk/product-category/consumables/bbs/bio

[Aac T10/Mk23 Build - Ex Srs or Vsr?]

Yeah, definitely chrono with your chosen weight before anything. 

 

I know my T10 is/was coming in around 2.1J on 0.45s last time I checked it at home, but last time I played it was doing 420ish on a 0.2, so there's definitely room for some creeping.

 

In other news, I ran my T11 at the last game after a rebuild. (tried one of the modify x range buckings with a modify barrel but it was running like trash) 

I put in the previous Lambda 6.05 barrel with a 70° maple leaf MR bucking and ran it all day without problem; didn't set the hop up beyond a quick couple minutes but I was reaching out to 92m consistently so I figured that'd do! 😂 

[270 on 2.5's]

Assuming your site is regular limits; 1.13J =350fps on a 0.20 then you'll be fine. 

 

Even assuming you're using 0.28s at 270fps you'll be putting out about 0.95J So that should easily be under the limit. 👌 

[Well Mb06 Hop up Problems]

If it's anything like the AA hop unit for VSRs, then turning it clockwise will be adding more hop. 

 

You'll want to turn your hop down, not up. 

[Well Mb06 Hop up Problems]

Yes, try heavy ammo as well as adjusting your hop.

0.28s are too light for sniper use. You want to be looking at 0.40s as a minimum, 0.43s and above ideally.

[Cyma Svd Owners?]

Ahh I saw that one.

 

Not really applicable for me unfortunately, wobble of the dial isn't a problem I've had thankfully. 

[Cyma Svd Owners?]

Do you have that video to hand, please? 

[Cyma Svd Owners?]

Posting as I'm in the same boat. 

Took it out for its first game on Sunday, I planned to run 0.36s but they were just too much for the standard hop. 

0.28s weren't much better either. 

 

I've got the combat union hop unit now installed with a maple leaf 60° bucking & nub, just have to wait to be able to test it now. 

I  noticed that the fps can drop massively depending on how much hop is added; at full hop it has dropped to under 200fps, from around 450 on none. 

[My T10 Jae 700 Build]

Whilst not in a T10, (Though I do have one, and a T11) I went through similar to you re: shorter barrel & power.

I bought A Well MB03, replaced the long outer barrel with a G-Spec length outer barrel and found the Rapax 3J to give me around 2.1J currently, with the AA Hop unit, a Maple leaf 70 MR bucking and TNT 300mm inner barrel combined with an AA Teflon cylinder and SCW 90 air-braked piston.

[Cyma Svu]

Problem with getting it from taiwangun is that it'll still be full auto out of the box, and at 450~Fps it's a little spicy! 

[Taiwangun Shipping Disruption (Brexit Related Content)]

Ahhhhh, that'll be why then! 

 

Yeah that explains it, thanks! 

 

 

 

[Taiwangun Shipping Disruption (Brexit Related Content)]

Strange. I get no option at all unless I choose a different country. 🤔 

[Taiwangun Shipping Disruption (Brexit Related Content)]

So what's the status on new orders with them currently?
Are new orders for UK customers on hold still?

I see lots of people having delays, but I've tried filling in an order out of curiosity and I'm not even getting the option to put one through; it gives me "Your shopping cart contains the following errors:
Choose delivery method"

 

But there's no option to choose anything.

[The 'What have you just bought' Thread]

18 minutes ago, SLACK_JAW said:

KeyMod foregrip in the bloody wrong colour but they despatched it with a pack of Haribo so all is forgiven.

 

 

Christ...your folks must be real proud of you.

 

Haha, too old for that! Some of it was from myself and the rest from the missus! 

[The 'What have you just bought' Thread]

Got some new bits as a birthday treat, can't wait to actually get out and use them finally! 

[Quick Questions & Simple Answers.]

You can always get a small ring connector for the wire and use the little screw to secure it that way. 

[Anyone Used Ukmcpro?]

Yeah, used them plenty of times and not had any real trouble. 

Had some sizing issues, but they were good dealing with returns.