-
Posts
643 -
Joined
-
Last visited
-
Days Won
1 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Posts posted by Hudson
-
-
-
Can you post up some photos of your 226?
Both sides, and also ones with the top & bottom separated, and of the hop & barrel unit.
-
Are you sure they gave you marui ones?
The rear of that magazine looks different to the ones I remember having; there was no detail or markings one them, from what I recall.
What store did you go to?
Tokyo-Marui-G-31-25rd-Magazine-SIG-SAUER-P226.webp
*edit
The one in your picture looks more like a KWA one, without having it to hand:
-
When you say they didn't fit, what was wrong with them exactly?
I used to have an old 226, and didn't have any issues using the old or E2 mags.
-
When You wind hicaps it's going to require a lot; typically a few dozen winds. (You'll hear the clicking sound change once you've wound it fully).
I've been out of the P90 game for a while now; could never really get on with them, so I'm unsure on compatibility but these might be a solution:
https://www.patrolbase.co.uk/novritsch-100rnd-magazine-for-ssr90-p90-gen-2-aegs
Midcap style, so no winding and no feed issues that you get with hicaps.
-
-
Do you have a price bracket in mind?
-
Yes, you need to Dremel them in order to load them via the channel.
Tbh though, I've never had good results using ASG mags, either in a TM MK23 or an ASG, annoyingly.
They've always suffered from feeding issues for me.
-
1 hour ago, Cannonfodder said:
Fear Masters airsoft in Yorkshire according to his profile
I do hope it's a typo as that's 4.52j or 697fps with a .2
Neither. The limit before a FAC is needed is 16.25j so it's an air rifle.
Yes, sorry. You're right!
-
-
1 hour ago, Fatboy40 said:
If there's enough time for the delivery, and you don't mind a slight change, Warhead Industries do 0.32 and 0.43 bios which you can trust.
I'm not sure if the guns I'm planning on using will lift 0.32s unfortunately, last I remember 0.30s were pretty much the maximum I could lift with my current setup.
Will have to test and see.
As for 0.43s; Its for my bolt actions; I'm hoping not to have to adjust the hopup after I've finally got them all dialed in nicely, but thank you!
18 minutes ago, Cannonfodder said:I've bought vorsk bbs a few times from various sites and haven't had any problems.
Also bio bbs in general have come along way in the past decade. The days of them swelling up at the slightest bit of moisture and shattering in guns are in the past
That's good to know!
The only time I've ever had a gearbox explode on me mid-game was when I was using bio-ammo, so I've avoided it where possible since then.
My biggest issue is that I don't use enough in game to empty a bottle in a short time.
I still have a bottle of ammo I'm working through from last spring!
After that though, I may not need to worry about new ammo just yet;
One of the sites I've been looking at trying in the past is running a game on the 2nd and doesn't require bio ammo so that's probably my best bet for now.
Thanks for the help though!
-
I'm looking at visiting some new sites whilst I'm down in the Midlands, and unfortunately a lot of the ones that are running on the days I'm free are bio ammo only.
I've not used bio ammo for about 12 years, with varying success and my local retailer doesn't carry bio ammo in my weight (0.30 and 0.45).
I found vorsk Ammo at a store on my route down, but as I've not heard amazing things about the quality of their pistols, I'm wondering if using their ammo is just asking for trouble.
Does anyone have any experience using them?
-
I've bought from them in person and online, and had no issues.
All good in my experience.
-
4 hours ago, TubTub said:
Really nice camo job. Did you use netting as your guide lines for the hexagons?
No, I used a hexagonal stencil.
-
-
-
-
Before you adjust it, try something simple like stuffing an old sock at the bottom of the pouch, and see if that gives you the extra padding to secure the mags?
-
I've got ZCI hop units from @ak2m4 in my Amoeba; which I'm assuming might be similar.
One was a straight drop in, the other needed just the tiniest bit of filing on the other barrel to fit in (Despite being the same model gun!) -
I've got one of these, and use it for one of my sniper set-ups.
How well do yours sit when you're wearing them?
Do they feel tight and secure or is there movement and wobble?
Are the mags you're using the normal 30 round design (As in, based on what would be the 30rd mags for a real rifle)?
If so, then you may need to either adjust the bungees to tighten them up, or pad out the bottom of the mag pouch so that the mags sit higher and tighter against the elastic.
My mags are longer than usual; I assume they'd be 40 rounds IRL, so I've had no issues with them coming loose.
Reloading just takes a bit of practice to get it nice and smooth; I pull up and to the side on the bungees and the mags are easy to get out.
Do you have a photo of your rig set up as you'd use it? -
Had this in bits due to a dead trigger board for a couple of years, and finally got around to sorting it out.
Acquired a new stock tube and upper receiver rail to complete it, and now have it finished!
Swapped out the gearbox from my full length version which is currently being built up as a DMR to put in this one, along with a PDI 6.05 barrel and 50º Archwick bucking, I'll be looking forward to trying it out!
Brings the total of working VZ58s I have to 4 now.
- gavinkempsell, sp00n and Lozart
- 3
-
7 minutes ago, Jmason98 said:
I thought they were V2 mate?
Nope, the K is different from full size MP5s, in that it uses a V3 gearbox, but with a long type motor.
For a disassembly and detailed view inside you can check it out here:
https://rockoairsoft.blog.hu/2017/03/06/jg_mp5k
(Just bear in mind you'll need to translate from Hungarian).
-
-
I think someone must have had a word with him, or his drugs have worn off, as it's no longer on the discord. 😂
- The Waco Kid and Galvatron
- 2
sniper rifles
in General Discussion
Posted
You'll be better off posting or looking in the technical advice section, specifically the one for single action guns.
https://airsoft-forums.uk/forum/29-single-action-guns/
There's already a very in depth thread dedicated to the Ares Striker there that should be of use to you.
https://airsoft-forums.uk/topic/44710-ares-amoeba-striker-as-01as-02-owners-thread/