[Load-Out / Loadout Picture topic]

On 09/07/2022 at 11:44, Dan Robinson said:

Well got my kit together for tomorrow's Big Skirmish at AWA. 

 

 

My SVU courtesy of @Asomodaiwill be having its first run, which I'm looking forward to.  Got a big bag of 0.32s to go with it as well as a 3d printed stock extension which is stuck on such that it can be taken off if needed without leaving marks (the adhesive is still going off, but it will be invisible when it has finished). 

 

 

 

Also got an alternative 2x scope with a filament reticule which is pretty good.   There's a red dot sight in my case too. 

 

 

 

 

And of course my obligatory "Running Fat" badge. 

 

 

Have got a second Ops panel so I can quickly swap between M4 spray and pray games and DMR.  I haven't decided yet whether to try an run with both the M4 and the SVU at the same time.... That's a pretty heavy kit if I do. But I don't fully trust all my pistol mags.

 

 

 

Doubt it’s your first time wearing the osprey however how long until you remove the rod on the right shoulder? 

[Gun picture thread]

On 30/04/2022 at 19:56, DaktariT said:

Broke out the paint again and possibly ruined another gun.

 

 

I’d say you got away with that one pal 🤙

[Load-Out / Loadout Picture topic]

1 hour ago, Impulse said:

Since I'm no longer dressing up like a bush, I finally got snapped while playing! Weight loss loadout in its full glory because I've put 20 of the 45 kilos I originally lost back on thanks to stress eating over unemployment 
 

Even managed to use my GBBR AK instead of my NGRS 416, since my friend didn't want to use his last weekend so I could borrow his mags (I only have 1, he has 4, so 5 in total at 35 BBs each is usable).

 

 

If I managed to lose 45kg before, surely I can lose 35kg now! I'm even going to the gym and healthy eating (again) and stuff 😮

And stuff… 

[Gun picture thread]

On 14/02/2022 at 22:14, emilianoksa said:

Are you happy with the ICS BM9?

 

There's still not much in the way of users' reviews on the web.

 

How does it compare to the other M9s in your collection?

I had one for a short period 2nd hand.. they’re ok at best. I did have a ND with one, I was pointing down range naturally however I never trusted it after that. 
 

I can’t remember the ins and outs of it at the moment but something to do with the safety and the slide being charged. 
 

Safe to say it moved on. 

I felt materials were ok at best.

[Gun picture thread]

2 minutes ago, The Waco Kid said:

I miss read your post. I though you said “I can’t recommend Halfords paints” 😉

Monster colours are good too got a really nice FDE that’s looks magpully 

[Gun picture thread]

24 minutes ago, PopRocket123 said:

I think I may have a type...

German and well lubricated

[Load-Out / Loadout Picture topic]

8 minutes ago, Shobbs17 said:

My Current Loadout inspired by British Army Kit's from Afghanistan circa 2006 

Other than the A1, all correct kit for the time 

You’ve got the screw tash however you forgot the hero sleeves. Nice tho man. 

[Load-Out / Loadout Picture topic]

19 hours ago, SeniorSpaz87 said:

Decided to take advantage of the snow and take the Tropentarn out to play. Works pretty darn well. 
 

Trop-darn well ***

[Load-Out / Loadout Picture topic]

14 hours ago, Badgerlicious said:

H̴̫̽ȧ̴̢̤v̶̦̲͠e̷͈̻͌ ̴̏ͅy̷̟͒o̸̱̓̚ͅu̵̯̿ ̴̧̆b̷̙̳̊̅e̷͙̳̋̾e̵̱̠̊̍n̸̪̋̀ ̷̩̦̔̊g̸͉͒́ͅo̵̯̿ö̴̲̱́̒d̶̬̭͆ ̶̳̆b̶̺̂̈o̴͈͐̔y̵̨͆͘ś̵̠ ̵̳͛̀ͅạ̷͠n̴͙̎d̸̺͙̔ ̷̥̹̈́̆ģ̵̼̽̊ỉ̸͍͝ŕ̶͓l̸̠̂͠s̸͈̃̀͜ ̶̲̞̕t̷͎̦̏͝h̸͚̽̉i̵̪̯̐s̵͕̓̎ ̴̯̈́̓y̵̞͗e̷̎̓ͅa̵̲̜̒̍ȑ̴̭?̷̠̑ ̶̡͎̄

Ooo nah Bally and cable ties. Straight in the back of the van. 

[Load-Out / Loadout Picture topic]

11 hours ago, RostokMcSpoons said:

Bargain-bin S95 DPM + cheap hat and gloves off Wish + used/boneyard Viper skeleton harness.   ESS goggles, Tigris mesh mask.  Kombat UK universal holster. A couple of SA80 pouches, and a cheapo fast mag holder for when I'm in a hurry   (Got 4 of those on the way from that there China)

Works alright!  Just wish the DPM could hide my belly a bit better

Mil-Tec plate carrier mate. Will tuck right in, trust me 😉
+ nothing there pal haha 

[Comabting sweat/fog: exfog or sweatband? Or another solution?]

I’ve had exfog for like 2 years and can’t play without it. I was sceptical at first and I’m a super fogger. It really does work. 

 

[Exfog system with original box and T-band]

Hi all, 

 

As above, the unit itself is in mint condition along with accessories however the box is a bit tatty. 
 

Your thoughts gentlemen? 

[Gun picture thread]

1 hour ago, Darkmikey22 said:

That would be great buddy. 

 

So spent the day doing a second susat and LSW. 

Mmm good old crow cannon 

[G&G CM16 Raider Worthwhile Upgrades?]

Firstly welcome, 

 

I’ll suggest what others will suggest, take it for a game first, see how you get on. 
 

(If you’re anything like I was when I started you’ll nah I wanna spend money on upgrades) haha 

 

but seriously go get a game or two under your belt, heavy(er) bb’s and you should be fine.

[Specna 1 series (not edge) handguards]

21 minutes ago, Lozart said:

 

Honestly? I never had an issue with cheap drop in quad rails wobbling. At least, not so bad that it was bothering me. At least if you drop a fiver on an AliEx rail and it's shit, you haven't exactly lost much!

 

As @Speedbird_666 says though, a half decent one will have that little clamp bit that stops it wobbling.

Dang, a 5er? I’ve not seen these rails. 

[Specna 1 series (not edge) handguards]

8 hours ago, Lozart said:

 

You'll be fine. Standard delta ring. As long as you buy a half decent handguard you won't get wobble either so no need for the RAS 2.

This might be worth a look: https://www.popularairsoft.com/news/travis-haley-oif-m4a1-sopmod-clone

You not reckon I’ll get away with a Alli special? 

[Specna 1 series (not edge) handguards]

29 minutes ago, strykerles said:

depends on the handguard, as it uses a standard delta ring there shouldn't be any problem aas long as it uses the same

 

just may need to shim the outer barrel if it doesn't quite sit properly

Aye, was also considering getting a ring printed or an adapter. 

[Specna 1 series (not edge) handguards]

Hi all, gonna buy a specna B01 and turn it into an “Iraq spec” m4a1… Just wondering if anyone knows of any compatibility issues with after market handguards? I suspect barrel nuts will be different etc. Any advice welcome. 
 

Cheers, 

 

Ron

[Taiwangun Shipping Disruption (Brexit Related Content)]

Aww ffs just got me popcorn….

[G&G GR25 Malfunction]

YouTube how to unlock a gearbox. Pistol grip off, motor out, thin Allen key hook it round anti reversal latch and pull. YouTube it. 

Just now, RonLancs said:

YouTube how to unlock a gearbox. Pistol grip off, motor out, thin Allen key hook it round anti reversal latch and pull. YouTube it. 

 Sorry, sounds quite abrupt, in the middle of the office haha 

[Taiwangun Shipping Disruption (Brexit Related Content)]

15 minutes ago, GoopGoop said:

Sup guys hope everyone's well!

 

Sadly, my CYMA Platinum 0.97B from TG broke 3 hours after use. It makes the jingle when the battery plugs in but doesn't fire anymore.

 

TG think its the optical trigger sensor, and they're probably right. Not only that, but it dropped from 350 to 300fps within a few hours too, so guess there's an airleak already.

However, they are flat out declining to fullfill our warranty agreement. They said they are no longer shipping to the UK because of 'brexit' despite accepting my order and many other's in May.

For that reason they are not willing to give me a return label to send it back to them for repair.

I know it's likely a simple fix, but its my first RIF and I dont want to open it myself and void the warranty, incase there's more issues down the road.. I mean, it completely broke after 3 hours.

Pretty shocked at TG's customer service, they have been horrendously unhelpfull and are doing anything they can to shut me out. I'd prefer not to go down the paypal dispute route as I loved the gun while it lasted, and its £100 cheaper than buying in the UK, (and I paid a load in import fee's to get it here).

 

Anyways, just thought I'd share this in case anyone has any suggestions for what I should do. It's my first and only replica so I've been missing out on game days, sat here with a bunch of brand new unusable gear.

 

I'll see how things go from here on out, but if they continue to be unhelpful I'll probably post a brand new thread on here warning people of the risks involved with TG.

Peace out

First RIF as well.. I’d take the PayPal route mate if you’re really against that then only option is to send it to a tech (more money). Sorry to hear about TG being dicks, luckily I’ve never had a problem with them but from the sound of things a lucky escape. 

[Jw3 Combat Master Aa R601 Holster]

Hey all, 

 

Done my research however I’m just wondering if there’s any owners of the above who could let me know a good holster for it that’s not £46? 
 

Will a Hi Capa holster not fit? 

[Taiwangun Shipping Disruption (Brexit Related Content)]

2 minutes ago, Greg147 said:

On the topic of ordering from TG, has anyone else lost the option to select a delivery on the website? I was willing to gamble an order due to them having something out of stock elsewhere, but when checking out, I select Great Britain, tick a 'terms of delivery box', and then an error saying' Your shopping cart contains the following errors: Choose delivery method'

 

Changing GB to any other country unlocks a check box for delivery type, but this isn't there for GB. Am I missing something, or have they suspended orders? 

Yea man, scroll up / back a page. 

[Taiwangun Shipping Disruption (Brexit Related Content)]

1 hour ago, Tactical Pith Helmet said:

Good thinking.  Cheers mate.

The crime is getting caught, something that should be kept private. 
 

copyright https://airsoft-forums.uk/profile/19415-magpietactical/

 

 

[Load-Out / Loadout Picture topic]

35 minutes ago, Lozart said:

 

and our resident Red Shirt at the front! 🤣

Ah yes, the first to get vaporised or eaten by a planet.