RonLancs
-
Posts
380 -
Joined
-
Last visited
-
Days Won
1 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Posts posted by RonLancs
-
-
-
20 minutes ago, Shamal said:
Poser!
Looks good fella👍
Regards
Haha that’s me Mrs that “cmon the kids do it” you got to look down with a stare like you just cooked a fool.
-
Don’t normally do this kinda thing but I’m happy with how it panned out.
-
27 minutes ago, alxndrhll said:
Sorry, couldn't resist.
Dang she shoulda resisted. “Get in the van”
-
-
-
Hey all, looks like TG aren’t delivering again?
-
-
-
Hi gang,
So if anyone’s interested put the SHS m4 nozzle back in and we’re getting highs of 280 on .28’s we all good you reckon? (Really don’t wanna she’ll out for some .2’s lol)
-
59 minutes ago, Rogerborg said:
I know them feels. It's good to be back. Yup, you're comfortably under, you could even go a bit higher. How was the air seal, and did you lube the o-rings? If not, a squirt of silicone oil down the nozzle (then blow it out on auto before reassembly) can perk up a tired toy.
Aye, I know the dance by now. Thanks tho. The only thing was I swapped a SHS m4 nozzle for the original blue plastic nozzle (CYMA MP5) as around 3-4 months ago when I last opened it up it was firing over 350 on .2’s so I’m cautious of chucking that back in. I’ll have a fettle tonight and see what’s going on.
-
Hey all,
Been a while.. I’ve got my first game in an age on Saturday (bit o CQB) and I opened my gat to give her a spruce and chrono’d her. Now, can’t remember what weight bb’s I had in stock but I’m pretty sure they’re either .25’s / 28’s. I’m getting 270 (ish, hop all the way off) from you guy’s experience reckon I’m field legal on .2’s? New piston o ring, new cylinder head and a squeaky clean barrel.
Thanks in advance & good to be back.
Ron
-
1 hour ago, RonLancs said:
Tis a beech - I’m in the process of getting an adapter so I can have a inter grated suppressor to resemble my cod load out
-
On 28/05/2021 at 17:39, Jacob Wright said:
Yeah literally as @Davegolfsaid, trying to get rid of the suppressor threads. The adapter that had been screwed into the front sight block is jammed tight in there! -
On 28/05/2021 at 13:16, Davegolf said:
I think he’s just trying to make it look like the MP5K in RS with no compensator threads.How you doing anyway Ron 😁
Ahh fairs, the front sight is a bugger! I’m good mate thank you, been lying low for a while saving for a DMR project for NAF 🤞 you all good? -
On 25/05/2021 at 19:18, Jacob Wright said:
Had a few hours to get some dremel-ing done this afternoon. Trying to split my time between repairing the Land Rover and working on the various Airsoft projects I have going on.
It’s not pretty and needs some tidying up but I’m happy with the progress!
What're you up to there mate?
-
19 minutes ago, mightyjebus said:
it was crap. 30 rounds in 3.1 seconds which meant rolling around for 5 minutes trying to get the magazine out of the pouch you were lying on top off and jammed it up your armpit then you could fire another 30 rounds in 3.1 seconds. on the plus side at least the barrel didn't get too hot as you couldn't change it anyway.
Let's not mention the ninja bipod that would spring out and catch on something when you looked at it in a funny way (which was actually your "don't spring out right now face").
I used the L4A1 prior to the L86 LSW (Light [it wasn't] Support [it didn't] Weapon [questionable]) and even though it was a heavy bugger at least it had the decency to put the weight at the back end instead of sticking a 4 pound ninja bipod on the end of the barrel.
Crow cannon
-
4 hours ago, kasaran said:
tbh, the stock feels solid, and only comes off if i hold the lever, i doubt i'll adjust it too often in game
im just glad it got delivered and sounds like it fired well. chrono sheet is a solid 345fps too
thanks for letting me know what it was though. it looks a little like an antireversal latch (in my inexperienced mind for teching) so was a little confused.
the grach came with one leaky mag from the bottom valve. the two spares seem to hold (they both came with enough pressure to just about cycle once) but i have run out of gas, so i cannot check further. slide feels very stiff though, may need some fettling
Parenting completed.
So, as discussed:
If you don’t have that piece I’m sure you could easily fashion one.
if the anti reversal latch looking thingy falls out when you retract the stock then that silver clip thingy is in the wrong way just keep changing it’s position until it doesn’t fall out.
-
-
5 minutes ago, kasaran said:
thanks, no spring there, i guess thats why it was loose and jamming the stock. seems to work ok without it at the moment though. casualty from the spring chamge i guess?
maybe, when I finish work I'll send a pic of mine - tell me when you fully retract the stock does it come all the way out?
-
1 hour ago, kasaran said:
Well guys. My journey on this has ended. It has arrived by UPS.
Order placed on the 1st of march. UPS collecting it on the 4th.
Taxes paid on the 9th....
Ukara expired on the 27th.
Delivered 7th april.
It appears to have not been opened...
the raptor mp443 is hella lubey xD
And the mp5 retractable butt stock wouldnt come out so i removed the back plate and this fell out. No idea where it was. But it works now. Fire pretty nice too.
that goes in the little groove on the right side as you remove the black polymer stock piece by removing the pin - there should be a little silver piece of metal that acts as a spring. - I put velcro on mine to reduce wobble.
-
CYMA MP5 (CoD Loudout-ish)
- Ebeneezer Goode, PopRocket123 and SSPKali
-
1
-
2
-
Anywhere in the UK have Specna stock? Tempted to try the edge .20 series or have they flopped again?
-
Load-Out / Loadout Picture topic
in Guns, Gear & Loadouts
Posted
Nice away team, I can see Jean-Luc on your left.